Posted 24 February 2018 - 08:57
I upgraded to kernel 4.15 so there is no need to re-install E2 once again.
No, not only dvbsoftwareca. It is necessary to correct decsa.h and edvbdemux.h, at least. And maybe something else. On the kernel 4.15 the compilation e2pc is terminated with an error.
Posted 24 February 2018 - 17:36
I upgraded to kernel 4.15 so there is no need to re-install E2 once again.
No, not only dvbsoftwareca. It is necessary to correct decsa.h and edvbdemux.h, at least. And maybe something else. On the kernel 4.15 the compilation e2pc is terminated with an error.
It''s Ok, i will stick with kernel 4.13 for now.
@Mounir67,
I already posted lsdvb output here #1254
Posted 24 February 2018 - 18:46
@roxette
fine , you dvb card is detected ...
@1455
enigma2pc-6.1 works ..
i installed a patched xine-lib-1.9 outside the directory and it is detected by enigma .
the problem was the logo.mvi , and the files libjpeg8-dev and libjpeg8-turbo-dev .
cool now !!
thank you for your support 1455 ..
Posted 25 February 2018 - 00:13
@1455
iptv stops after 30 sec ..it cannot rebuffer .
thank u
Posted 26 February 2018 - 17:11
the issue concerns service 4097 ..and m3u file ...they play only about 20 or 30 seconds and it stops ..is there any tricks or workaround for this ?
thank you
Posted 19 March 2018 - 17:55
Posted 20 March 2018 - 10:49
mickd, did you mean start without plugins or some problems with plugins? I couldn't find the cause of the segfault on exit. Most likely, problems with the software environment.
I suppose that it is necessary to compile the PC image, and not the program separately. But we use a full distribution, not an image.
Posted 20 March 2018 - 12:06
Posted 23 March 2018 - 08:33
Posted 2 April 2018 - 07:41
In kernel 4.14 and 4.15, the file ca.h no longer contains "ca_pid_t" and "CA_SET_PID" for some reason. Therefore, the archive contains the corrected file, which when starting the build script will be copied to 2 locations. Thus, now you can use new kernels.
Posted 16 April 2018 - 20:09
Since the topic is called "Build Script for Openpli Enigma2 on Ubuntu", now to save traffic only scripts need to be downloaded.
Posted 17 April 2018 - 12:55
thank you 1455
Posted 27 April 2018 - 12:55
Ubuntu-18.04 LTS is released today ...GCC7 inside .
Posted 29 April 2018 - 09:45
Try on 18.04 LTS. Added lirc build script.
I have a problem with lirc repeats when using "irsend". When the remote control button is released, the lircd client is constantly reconnecting. In this case video and audio is broken. If I don't using repeats, everything is OK. This is a question to author Alec Leamas.
Posted 4 May 2018 - 18:55
Hi there, I'm a ubuntu Noob and try to get engima2 running on ubuntu 17.10. I followed the steps here:
https://github.com/Raider05/enigma2pc
On step 3 I got errormessage while executing ./build_openpliPC.sh. The errormessage says that libtool isn't the correct version.
Then I found https://cloud.mail.r.../97G7/BPBnDtJxz and downloaded enigma2pc-6.1(2).tar.bz2
Now I'm not sure what to do.. Do I have to replace all the files in the enigma2pc folder with the ones from the downloaded archive? And then execute ./INSTALL_ALL?
What is the correct way? Can somebody give me a hint please?
Thx alot
hubinho
Posted 5 May 2018 - 08:49
If you are a newbe, then use LTS releases only. See README.EN. Although the scripts are designed for a first installation of Ubuntu and should do everything automatically, but I don't advise to begin with this. First, learn the basics.
Then download current archive and run the scripts in order in the terminal as root and see what is writting. Look for words "error".
Posted 12 May 2018 - 11:43
Posted 12 May 2018 - 12:39
maye be on maintenance !!
Posted 13 May 2018 - 08:47
Thank you 1455 for your reply and advice!
Yesterday I installed Ubuntu 18.04 LTS and tried to run the scripts separately one after the other. As far as I could see everything went fine.. then while running "5_build_openpliPC" some errors occured and the script stopped. Unfortunately I didn't copy the whole errormessages but the errors were in section "dvbsoftwareca" and sayed something like old functions weren't found or used anymore. Something like: ca_descr-t not found, please use caddr_t.. Do you have an idea why this problem occured?
After that I installed Ubuntu 16.04.4 and tried again. This time I was unable to build 3_build_libxine.sh. In my opinion it's not possible to clone xine-lib-1.2-vdpau from the repository: https://anonscm.debian.org/hg/xine-lib
Your post yesterday would confirm that. What can I you now? Do we have to wait until it's online again or is there a workaround or another source to clone xine-lib-1.2-vdpau?
And in general, which ubuntu version would you recommend my to get e2pc running? Does it run on 16.04 with Kernel 4.13?
And yes, I'm sill working on learning the basics.. 
0 members, 1 guests, 0 anonymous users
