Re: RTL2832U chipset support proposal #121
Re: RTL2832U chipset support proposal #122
Re: RTL2832U chipset support proposal #123
Posted 5 February 2013 - 12:17
Re: RTL2832U chipset support proposal #124
Re: RTL2832U chipset support proposal #125
Re: RTL2832U chipset support proposal #126
Re: RTL2832U chipset support proposal #127
Re: RTL2832U chipset support proposal #128
Posted 16 March 2013 - 10:17
I see. What I do see is that e2 offers the possibility to select the DVB-C frequency range. However, even when I do that (and reboot after that), the driver still registers as DVB-T and does not allow me to tune to the same channels my built-in DVB-C tuner already knows.The driver should report all the systems it supports (T, C).
When it does, e2 offers the possibility to switch between systems.
Edited by BuGless, 16 March 2013 - 10:17.
Re: RTL2832U chipset support proposal #129
Posted 16 March 2013 - 11:06
BTW, this is how I worked around a similar issue, for another frontend:
http://sourceforge.n...ed-delsys.patch
Re: RTL2832U chipset support proposal #130
Re: RTL2832U chipset support proposal #131
Posted 21 March 2013 - 16:57
this hard to answer someone like me
i'm new user to linux
please how can i use file with extension ".patch"
It's not a user-friendly procedure, especially for a linux newby, as it involves compiling the entire set of media drivers and replacing the current kernel modules on your system.
Anyway, this is the step-by-step guide:
1) download the dvb-usb-rtl2832_kernel_3.8.tar.gz file on your home directory;
2) unpack it:
tar xvzf dvb-usb-rtl2832_kernel_3.8.tar.gz
3) clone the media_build repo and compile it:
git clone git://linuxtv.org/media_build.git cd media_build ./build
You may need to install the 'git' package (using your distribution package management tool) and also you will need the linux-headers package and maybe something else; the 'build' script will tell you which packages you need.
4) apply the patch and compile everything again:
cd linux patch -p1 < ~/dvb-usb-rtl2832.patch cd .. make allmodconfig make
You will need the 'patch' package to complete this step (install it as usual).
5) if you encountered no errors, you can install the new drivers on your system:
sudo make install
and you are ready to use your new device.
Edited by Gennar1, 21 March 2013 - 16:58.
Re: RTL2832U chipset support proposal #132
Posted 21 March 2013 - 17:04
I have one of these sticks, and it works fine for DVB-T reception. The question is, can I use it for DVB-C reception as well? How do I convince the driver that he is of the DVB-C type so that enigma2 recognises it as such?
Are you sure your device supports DVB-C?
AFAIK, rtl2832 is a DVB-T demodulator only, and hybrid devices with DVB-C support have a second demodulator named rtl2840. It is supported by this driver, but I have no idea if it works with Enigma2.
Note that the dvb-usb-rtl2832 kernel module has a 'demod' parameter to select the delsys:
demod:Set default demod type(0=dvb-t, 1=dtmb, 2=dvb-c) (int)
I don't know how it is supposed to work, but you may play with this parameter to see if it has any effect.
Re: RTL2832U chipset support proposal #133
Posted 22 March 2013 - 03:03
I have one of these sticks, and it works fine for DVB-T reception. The question is, can I use it for DVB-C reception as well? How do I convince the driver that he is of the DVB-C type so that enigma2 recognises it as such?
This thread has some pointers for what you can do. Hope it helps you. http://www.vuplus-co...k-with-vu.9028/
Re: RTL2832U chipset support proposal #134
Posted 25 April 2013 - 12:13
Please add "TerraTec Cinergy T Stick+", Device ID 0ccd:00d7 next time.
Not problem for me, I did add this manually and recompiled. Thanks for your good work!
Hi,
I have the same device.
In the online dvb-kernel-module for rtl2832 this device is not recognized... could someone help me how to configure it. device dm800se.
Re: RTL2832U chipset support proposal #135
Re: RTL2832U chipset support proposal #136
Re: RTL2832U chipset support proposal #137
Posted 7 May 2013 - 03:11
@Unlocker AL
Sent you PM..
I'll attach ipk for other dm800se owners as well.
I confirm this is working with usb stick ID: 0ccd:00d7, TerraTec Cinergy T Stick+ model.
maybe online modules have to be updated. thanks.
Am trying todo use this same USB tuner with años AZBox Premiun Hd Plus with Enigma2 kernel 2.1 and i hace done almost everything o could imagine and still the box wont show it under tuner settings, if run lsusb con telnet i can ser ir there.
Thanks
Re: RTL2832U chipset support proposal #138
Posted 31 May 2013 - 17:22
In Ubuntu 13.04 the Cinergy TStick RC with the Realtek chipset stick works out of the box. On older versions of the OS read that wiki: http://wiki.ubuntuus...Cinergy_T_Stick
Re: RTL2832U chipset support proposal #139
Posted 4 June 2013 - 02:47
I've got a peak dvb-t usb stick, usb id 1b80:d395 Afatech, worked fine with the old kernel 3.0 driver but can't get it working with the new 3.8 version. compiles without errors, the only thing i've noticed is that dmesg gives
Re: RTL2832U chipset support proposal #140
Also tagged with one or more of these keywords: DVB-T
Pls recommend hardware for remote fallback tuner setupStarted by pli-marc, 8 Sep 2020 remote tuner, dvb-t, dvb-t2 and 1 more... |
|
|||
Correct EPG encoding for DVB-T TW to display correctly chinese charactersStarted by Kopernik, 6 Oct 2018 epg, chinese traditional, zh-TW and 2 more... |
|
|||
France
New channel referencesStarted by reg, 8 Apr 2016 France, DVB-T |
|
|||
Nothing found in DVB-T scan (TU1216-DM8000-OpenPLi4)Started by sylvester74, 31 Jan 2016 DVB-T, TU1216, DM8000, OpenPLi4 |
|
|||
France
Additional channel referencesStarted by reg, 5 Aug 2015 France, DVB-T |
|
10 user(s) are reading this topic
0 members, 10 guests, 0 anonymous users