170 replies to this topic

[michaelp]

I have now realised I am being stupid and should be trying to use Gennar1's new driver, in the way he says should work for PCs. Sorry for all the dumb posts.

[thomashall]

device ID 0bda:2838

after termination of getstream i see error message in dmesg "dvb-usb: error while stopping stream." and i can't start another streaming from this card, after module rmmod + modprobe work's everything as expected

[michaelp]

For anyone interested, I have managed to get the Leadtek WinFast DTV2000DS PLUS working in Xubuntu 12.04 with 3.2 kernel using the github version of Ambrosa's driver. I didn't need the newer version from Gennar1. Details are on the linuxtv wiki. All I had to do was edit the header file to include the PID.

[sfasf]

Please add "TerraTec Cinergy T Stick+", Device ID 0ccd:00d7 next time.

Not problem for me, I did add this manually and recompiled. Thanks for your good work!

[firewhale]

i just watch TV
how can i use ....path
ker3.6 kubuntu12.1

[BuGless]

I have one of these sticks, and it works fine for DVB-T reception. The question is, can I use it for DVB-C reception as well? How do I convince the driver that he is of the DVB-C type so that enigma2 recognises it as such?

Edited by BuGless, 16 March 2013 - 09:46.

[pieterg]

The driver should report all the systems it supports (T, C).
When it does, e2 offers the possibility to switch between systems.

[BuGless]

The driver should report all the systems it supports (T, C).
When it does, e2 offers the possibility to switch between systems.

I see. What I do see is that e2 offers the possibility to select the DVB-C frequency range. However, even when I do that (and reboot after that), the driver still registers as DVB-T and does not allow me to tune to the same channels my built-in DVB-C tuner already knows.

Edited by BuGless, 16 March 2013 - 10:17.

[pieterg]

Then I'm afraid the driver for your particular device does not advertise multiple DELSYS properly.

BTW, this is how I worked around a similar issue, for another frontend:

http://sourceforge.n...ed-delsys.patch

[firewhale]

this hard to answer someone like me
i'm new user to linux
please how can i use file with extension ".patch"

[Gennar1]

this hard to answer someone like me
i'm new user to linux
please how can i use file with extension ".patch"

It's not a user-friendly procedure, especially for a linux newby, as it involves compiling the entire set of media drivers and replacing the current kernel modules on your system.

Anyway, this is the step-by-step guide:

1) download the dvb-usb-rtl2832_kernel_3.8.tar.gz file on your home directory;
2) unpack it:

tar xvzf dvb-usb-rtl2832_kernel_3.8.tar.gz

3) clone the media_build repo and compile it:

git clone git://linuxtv.org/media_build.git
cd media_build
./build

You may need to install the 'git' package (using your distribution package management tool) and also you will need the linux-headers package and maybe something else; the 'build' script will tell you which packages you need.

4) apply the patch and compile everything again:

cd linux
patch -p1 < ~/dvb-usb-rtl2832.patch
cd ..
make allmodconfig
make

You will need the 'patch' package to complete this step (install it as usual).

5) if you encountered no errors, you can install the new drivers on your system:

sudo make install

and you are ready to use your new device.

Edited by Gennar1, 21 March 2013 - 16:58.

[Gennar1]

I have one of these sticks, and it works fine for DVB-T reception. The question is, can I use it for DVB-C reception as well? How do I convince the driver that he is of the DVB-C type so that enigma2 recognises it as such?

Are you sure your device supports DVB-C?
AFAIK, rtl2832 is a DVB-T demodulator only, and hybrid devices with DVB-C support have a second demodulator named rtl2840. It is supported by this driver, but I have no idea if it works with Enigma2.
Note that the dvb-usb-rtl2832 kernel module has a 'demod' parameter to select the delsys:

demod:Set default demod type(0=dvb-t, 1=dtmb, 2=dvb-c) (int)

I don't know how it is supposed to work, but you may play with this parameter to see if it has any effect.

[sopasifat]

I have one of these sticks, and it works fine for DVB-T reception. The question is, can I use it for DVB-C reception as well? How do I convince the driver that he is of the DVB-C type so that enigma2 recognises it as such?

This thread has some pointers for what you can do. Hope it helps you. http://www.vuplus-co...k-with-vu.9028/

[Unlocker AL]

Please add "TerraTec Cinergy T Stick+", Device ID 0ccd:00d7 next time.

Not problem for me, I did add this manually and recompiled. Thanks for your good work!

 

Hi,

 

I have the same device.

In the online dvb-kernel-module  for rtl2832 this device is not recognized... could someone help me how to configure it. device dm800se.

[sfasf]

@Unlocker AL

 

Sent you PM..

 

I'll attach ipk for other dm800se owners as well.

 

Attached Files

•  kernel-module-dvb-usb-rtl2832_3.2-r13.13.34_dm800se.ipk   138.24KB   248 downloads

[Unlocker AL]

@Unlocker AL

 

Sent you PM..

 

I'll attach ipk for other dm800se owners as well.

 

I confirm this is working with usb stick ID: 0ccd:00d7, TerraTec Cinergy T Stick+ model. 

 

maybe online modules have to be updated. thanks.

Edited by Unlocker AL, 27 April 2013 - 10:30.

[Prvt_N00b]

I have been una le todo make

@Unlocker AL
 
Sent you PM..
 
I'll attach ipk for other dm800se owners as well.

 
I confirm this is working with usb stick ID: 0ccd:00d7, TerraTec Cinergy T Stick+ model. 
 
maybe online modules have to be updated. thanks.

Am trying todo use this same USB tuner with años AZBox Premiun Hd Plus with Enigma2 kernel 2.1 and i hace done almost everything o could imagine and still the box wont show it under tuner settings, if run lsusb con telnet i can ser ir there.

Thanks

[tjm]

In Ubuntu 13.04 the Cinergy TStick RC with the Realtek chipset stick works out of the box. On older versions of the OS read that wiki: http://wiki.ubuntuus...Cinergy_T_Stick

[fredfred]

I've got a peak dvb-t usb stick, usb id 1b80:d395 Afatech, worked fine with the old kernel 3.0 driver but can't get it working with the new 3.8 version. compiles without errors, the only thing i've noticed is that dmesg gives

 

 

[ 7411.122103] usb 1-2: New USB device found, idVendor=1b80, idProduct=d395

[ 7411.122114] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 7411.122121] usb 1-2: Product: usbtv

[ 7411.122126] usb 1-2: Manufacturer: realtek

 

could the apparent inability to decide if it's realtek or afatech be the problem? and if so how do i fix it?

[mcfly82]

@Unlocker AL

 

Sent you PM..

 

I'll attach ipk for other dm800se owners as well.

 

Hello,

is there a similar ipk for vu+ solo?