12 replies to this topic

[franco888999]

Hi,

This is the dmesg:


usb 1-1: new high speed USB device number 2 using ehci-brcm
dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
dw2102: start downloading DW210X firmware
dvb-usb: found a 'TeVii S660 USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TeVii S660 USB)
dvb-usb: MAC address: 01:01:01:01:01:01
Invalid probe, probably not a DS3000
dvb-usb: no frontend was attached by 'TeVii S660 USB'
input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-1/input/input1
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TeVii S660 USB successfully initialized and connected.
usb 1-1: USB disconnect, device number 2
dvb-usb: TeVii S660 USB successfully deinitialized and disconnected.
usb 1-1: new high speed USB device number 3 using ehci-brcm
usb 1-1: config 1 interface 0 altsetting 0 bulk endpoint 0x81 has invalid maxpacket 2
dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
dw2102: start downloading DW210X firmware
dvb-usb: found a 'TeVii S660 USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TeVii S660 USB)
dvb-usb: MAC address: 00:18:bd:5c:38:4f
DS3000 chip version: 0.192 attached.
dw2102: Attached ds3000+ds2020!

DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)...
input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-1/input/input2
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TeVii S660 USB successfully initialized and connected.
ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
ds3000_firmware_ondemand: Waiting for firmware upload(2)...
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...

It seems to be ok, but when I change the channel from SD to HD the letter of the tuner turn green but the channel doesn't display, below other line of dmesg:


[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xe0af2c94
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 0 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xe0af2c94
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 0 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xe0af2c94
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
[VID]: VIDEO_STOP 1 1
[AUD]: AUDIO_STOP 1
[AUD]: AUDIO_CONTINUE 1 0 audio pid_hndl : 0x0
[AUD]: AUDIO_CONTINUE:bcm7335->audio_pid_hndl is null 0 0
[AUD]: AUDIO_SET_BYPASS_MODE 1
[AUD]: proc_get_ac3 0 audio_passthrough_spdif : 0
[AUD]: AUDIO_PAUSE 1
[AUD]: AUDIO_PLAY 1 decoder start : 0
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_FREEZE 1 0
[VID]: VIDEO_PLAY 1 2 2
[VID]: VIDEO_SLOWMOTION 0 1
[VID]: VIDEO_FAST_FORWARD 0 1
[VID]: VIDEO_CONTINUE 1 1
[AUD]: AUDIO_CONTINUE 1 1 audio pid_hndl : 0xe0af2c94
[AUD]: setting mute : 0
[VID]: VIDEO_GET_SIZE src w: 0 h:0 display w:0 h:0
[VID]: VIDEO_GET_SIZE aspect: 1 0
root@vuuno:~#


Please there is someone that can tell me what wrong?

The best regards

[franco888999]

Hi,
no one that can tell me something about this problem?
I think that is something related to the virtual tuner.
What can I do to debug the problem? which kind of information will be necessary?
What is the problem why no one tell me something?
Please help me.

[buzzfuzz]

hallo franco, i try tevii s660, but without chance, i connect usb but dont initialize, stb dont show another tuner. do you have extra drivers for that ?
in my uno problem with this usb tuner.

[franco888999]

hallo franco, i try tevii s660, but without chance, i connect usb but dont initialize, stb dont show another tuner. do you have extra drivers for that ?
in my uno problem with this usb tuner.

Hi,
You have to install at the least this driver:

dw2102
ds3000
dvb-usb
firmware tevii s660

do ipkg list than search for this kernels driver and then install it.
after this do a "depmod" and then "modprobe" all the kernel dirver dvb-usb,ds3000, dw2102.

if you have doing this after a "lsmod" you can see this kernels module loaded in the list.
Attach the tevii and the blue led will blink two times.
do a "dmesg" and you will see the initialization and other info.
Restart enigma2 and finally in the tuner section you can see the second tuner installed.

Please excuse me for my bad english and feel free to ask me for information.

[Dimitrij]

@franco888999
From the work of HD channels are no more problems?

[franco888999]

@franco888999
From the work of HD channels are no more problems?

Hi,

I still have the problem, I have tried olso Blackhole and VTi image with the same result:
the signal strength go from 10-20% to 80-90% rapidly and of course the channel can't be decoded, I have tried also other image the BlackHole and the VTI but same result.
In the first time I thought that the problem was the usb tuner helper but now after tree image that have different helper and same behavior I thinking that the problem are in the kernel modules (DS3000?), but I'm not able to debug a kernel module.
The problem seems to be only with a unicable LNB, I'd be happy just to confirm if it is true, I don't have a single universal LNB.

The best regards

[buzzfuzz]

hallo
frends, is not possible make some ipk file from that ? becasue this manual from franco is not for 99% people. :-)
too complicated.

[Dimitrij]

The problem seems to be only with a unicable LNB, I'd be happy just to confirm if it is true, I don't have a single universal LNB.

I think that's not the LNB.
Most likely the tuner( tevii s660) itself is obsolete.

[franco888999]

The problem seems to be only with a unicable LNB, I'd be happy just to confirm if it is true, I don't have a single universal LNB.

I think that's not the LNB.
Most likely the tuner( tevii s660) itself is obsolete.

Perhapsbut It have worked one motnh ago....but in any way I need a second tuner that work becouse is reale disreputable to sell my uno for buy a ultimo, so I have see a sundtek skytv ultimate that seem to work great with setopbox, have you?

[Dimitrij]

sundtek skytv not available yet.
I'm waiting for the start of their sales.
Perhaps this is the best choice.
Although a bit expensive.

[buzzfuzz]

hallo franco, i try tevii s660, but without chance, i connect usb but dont initialize, stb dont show another tuner. do you have extra drivers for that ?
in my uno problem with this usb tuner.

Hi,
You have to install at the least this driver:

dw2102
ds3000
dvb-usb
firmware tevii s660

do ipkg list than search for this kernels driver and then install it.
after this do a "depmod" and then "modprobe" all the kernel dirver dvb-usb,ds3000, dw2102.

if you have doing this after a "lsmod" you can see this kernels module loaded in the list.
Attach the tevii and the blue led will blink two times.
do a "dmesg" and you will see the initialization and other info.
Restart enigma2 and finally in the tuner section you can see the second tuner installed.

Please excuse me for my bad english and feel free to ask me for information.

Hallo can you send me that files, drivers for that or can you sand me pocture help for that? Because that is for linux users but for me isnt it. Please for dummy user. :-) thx

[snakie]

Get on telnet and type this:
opkg install enigma2-plugin-drivers-dvb-usb-dw2102
It should install all the drivers-firmware and after you can reboot and see the new tuner.
If you cant see the new tuner then change skin and reboot and try again.
I had this problem right now and had to change the skin to normal one included in the image.

[snakie]

dmesg reports:
dvb-usb: found a 'TeVii S660 USB' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
dw2102: start downloading DW210X firmware
dvb-usb: found a 'TeVii S660 USB' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (TeVii S660 USB)
dvb-usb: MAC address: 00:18:bd:5b:62:e3
DS3000 chip version: 0.192 attached.
dw2102: Attached ds3000+ds2020!

DVB: registering adapter 1 frontend 0 (Montage Technology DS3000/TS2020)...
input: IR-receiver inside an USB DVB receiver as /devices/platform/ehci-brcm.0/usb1/1-1/input/input3
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TeVii S660 USB successfully initialized and connected.
usbcore: registered new interface driver dw2102
DVB: registering adapter 0 frontend 2 (vtuner)...

The last 2 lines are the important ones to see the new tuner in the Tuners menu.