Jump to content


Photo

New drivers dreambox-dvb-modules_2.6.18-7.4-20120202

Started by Happysat, 03 Feb 2012 18:37

  • Please log in to reply
42 replies to this topic

#1 Happysat

  • Senior Member
  • 697 posts

+43
Good

Posted 3 February 2012 - 18:37 

update dreambox hardware drivers
- cxd1981(hybrid DVB-C/-T) increased max. frequency to 900Mhz
- cxd1981(hybrid DVB-T) fixed ineffective 5V for active antennas after mode change
- bcm4505/6 improved receiption sensitivity (fixes problems with small dishes since blindscan support)
dm500hd,dm800se,dm7020hd: fixed audio volume boost on alsa playback
dm7020hd:
- fixed frequently "error code 0x18006" messages on bootup


http://dreamboxupdat...02-r0_dm800.ipk

http://dreamboxupdat...-r0_dm800se.ipk

http://dreamboxupdat...2-r0_dm8000.ipk

http://dreamboxupdat...-r0_dm500hd.ipk

Octagon SF8008 / TBS5530  DVB-S2/T2 T-85/1.50Mtr/3x90cm (53e 52e 51,5e 28e 25,9e 23e 19e 13e 9e 4e 1w 5w 14w)

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #2 MiLo

  • PLi® Core member
  • 14,055 posts

+298
Excellent

Posted 3 February 2012 - 18:41

The last update we had to revert because they didn't boot reliably. So forgive us that we want to test them first this time...
Real musicians never die - they just decompose

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #3 theparasol

  • Senior Member
  • 4,157 posts

+198
Excellent

Posted 3 February 2012 - 19:15

Ik heb zojuist de dreambox-dvb-modules_2.6.18-7.4-dm800-20120202-r0_dm800 geinstalleerd op mijn DM800HD PVR.

Helaas, box start niet meer op. Zal wel meer omgegooid moeten worden in enigma2 oid.
Ik wacht het wel af wat het oordeel van de experts is.

Edited by theparasol, 3 February 2012 - 19:20.

@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #4 ims

  • PLi® Core member
  • 13,785 posts

+214
Excellent

Posted 3 February 2012 - 20:04

when you install it manualy after new flash, then it works after reboot?
Kdo nic nedělá, nic nezkazí!

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #5 MiLo

  • PLi® Core member
  • 14,055 posts

+298
Excellent

Posted 3 February 2012 - 20:20

Mine booted twice okay now... still holding my breath...
Real musicians never die - they just decompose

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #6 gjstroom

  • Senior Member
  • 524 posts

+16
Neutral

Posted 3 February 2012 - 21:39

foutje...

Edited by gjstroom, 3 February 2012 - 21:39.

Amiko8240, DM500HD, DM800, DM800SE, DM800SESR4, DM800SEV2, VU+ SoloSEV2, VU+ UnoSE

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #7 Zaxxman

  • Member
  • 6 posts

0
Neutral

Posted 4 February 2012 - 01:03

Mine crashed and burned

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #8 adri

  • Senior Member
  • 373 posts

+5
Neutral

Posted 4 February 2012 - 14:48

I see the new dreambox-dvb-modules have been added to the packages yesterday by Milo.
Yet I when I did an online update of my DM8000 today, I still see the old modules from 20110902 installed.
Is this correct?

Adri.

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #9 Happysat

  • Senior Member
  • 697 posts

+43
Good

Posted 4 February 2012 - 15:10

The last update we had to revert because they didn't boot reliably. So forgive us that we want to test them first this time...


All is forgiven, see this was a short test this time :)

Octagon SF8008 / TBS5530  DVB-S2/T2 T-85/1.50Mtr/3x90cm (53e 52e 51,5e 28e 25,9e 23e 19e 13e 9e 4e 1w 5w 14w)

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #10 theparasol

  • Senior Member
  • 4,157 posts

+198
Excellent

Posted 4 February 2012 - 16:15

I see the new dreambox-dvb-modules have been added to the packages yesterday by Milo.
Yet I when I did an online update of my DM8000 today, I still see the old modules from 20110902 installed.


Same story here on my DM800HD PVR:

dreambox-dvb-modules - 2.6.18-7.4-dm800-20111109-revert-20110902-r6.3

@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #11 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 4 February 2012 - 16:36

the commit wasn't merged to the master branch till today, so wait for tomorrows update

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #12 adri

  • Senior Member
  • 373 posts

+5
Neutral

Posted 4 February 2012 - 16:40

the commit wasn't merged to the master branch till today, so wait for tomorrows update

Thanks Pieter,

Will try again tomorrow.

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #13 emer

  • Member
  • 36 posts

+1
Neutral

Posted 5 February 2012 - 12:21

when can we respect new modules in OpenPLi ? (I have 800HD)
tomorrow is today ... ;)

Edited by emer, 5 February 2012 - 12:22.

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #14 theparasol

  • Senior Member
  • 4,157 posts

+198
Excellent

Posted 5 February 2012 - 12:35

Updated this morning my DM800HD PVR and new drivers seem to be working ok for now!

dreambox-dvb-modules - 2.6.18-7.4-dm800-20120202-r6.3

@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #15 emer

  • Member
  • 36 posts

+1
Neutral

Posted 5 February 2012 - 13:52

ok ... :)



2.6.18 7.4 dm800 20120202 r6.3 - OpenPLi-2.1 - booted


Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #16 adri

  • Senior Member
  • 373 posts

+5
Neutral

Posted 5 February 2012 - 14:35

I just updated my DM8000 and working fine with new dreambox-dvb-modules-2.6.18-7.4-dm8000-20120202-r6.3

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #17 Robinson

  • Senior Member
  • 2,621 posts

+30
Good

Posted 5 February 2012 - 18:57

Does that mean the modules from the first post here can now be safely installed?

ET9000, OpenPLi 4.0, 13E, 19E

HD51, OpenPLi 6.2, 75E - 30W

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #18 ims

  • PLi® Core member
  • 13,785 posts

+214
Excellent

Posted 5 February 2012 - 19:13

yes and works well on my 800se.
Kdo nic nedělá, nic nezkazí!

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #19 MiLo

  • PLi® Core member
  • 14,055 posts

+298
Excellent

Posted 5 February 2012 - 19:14

Does that mean the modules from the first post here can now be safely installed?


No. It means you'll automatically get them when you upgrade.
Real musicians never die - they just decompose

Re: New drivers dreambox-dvb-modules_2.6.18-7.4-20120202 #20 emer

  • Member
  • 36 posts

+1
Neutral

Posted 5 February 2012 - 22:33

It's not the same ? There are some differences (from OpenPLi Team)?
Back to [EN] Enduser support

2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users

  1. Forums
  2. → PLi® Support
  3. → [EN] Enduser support