17 replies to this topic
#1
Posted 4 January 2007 - 20:25
It happened already twice this week. It seems that sometimes when the power line gets down (it happens a lot in my area ) the cccam (which is the default and only cam installed) does not automatically start anymore when the dreambox starts, even if i repeatedly reboot the box, or i reinstall cccam. If i start it manually in telnet, it works, until the next reboot. What can i do to repair this problem ? Until now i had to reinstall the whole image so that it comes back to normal.
thank you !
thank you !
Re: Cam problem #2
Re: Cam problem #3
Re: Cam problem #4
Re: Cam problem #5
Re: Cam problem #6
Re: Cam problem #7
Re: Cam problem #8
Posted 5 January 2007 - 12:41
The config file seems tobe fine.
You say you start ccam manually from telnet after a boot.
Could you try restrating it from the softcam setup screen after a reboot. See if that works.
You say you start ccam manually from telnet after a boot.
Could you try restrating it from the softcam setup screen after a reboot. See if that works.
Geen wonder... Had slechts een dm7000, maar wel ook een rotor. eigenlijk al een tijdje ook een dm600 en dm7025. Maar nu kijkend met een et9000 en vuduo
Re: Cam problem #9
Re: Cam problem #11
Posted 5 January 2007 - 19:43
ermethic wrote:
The contents of the plimgr.conf file is identical to the one above. The complete logs are to be found *here.*
I read the following in your log:
default emu emuname to enigma:len=13 =CCcam 1.3.1 =CCcam 1.3.1 = sh: /var/etc/plimgr/scripts/emusrv: not found
Especially the last line, the default script needed to start / stop a softcam is missing on your system and therefore CCcam is not started. You can copy the default from the image back from /var_init/etc/plimgr/scripts
When you have done that I am confident that it works ;-)
Greetzz, Peter (with a DM800/8000 and a Vu+ Duo) With an iPhone 5 :-)
Re: Cam problem #12
Re: Cam problem #13
Re: Cam problem #14
Posted 6 January 2007 - 06:22
I still have the same problem. I hope someone could help me with my problem to. Here's the link to my log files:
http://www.hostclip....4ea2fcd2a36b260
http://www.hostclip....4ea2fcd2a36b260
Re: Cam problem #15
Posted 6 January 2007 - 11:24
I see rqcamd needs two key-files which are default not present in the image. I don't have the keyfiles right now, but we could try if rqcamd also works with empty files. Type this in telnet:shoeboy wrote:
I still have the same problem. I hope someone could help me with my problem to. Here's the link to my log files:
http://www.hostclip....4ea2fcd2a36b260
touch /var/keys/Autoupdate.Key
touch /var/keys/Keylist.txt
And restart the cam again.
Re: Cam problem #16
Re: Cam problem #17
Posted 6 January 2007 - 14:53
Yeah before I was just testing it with fta channel's but then I switched to rqcamd and now opencam. Still the same problem though. I've started a new thread (http://www.pli-image...&thread_id=2244) because my issue is a little different.
Re: Cam problem #18
Posted 17 March 2007 - 13:04
[quote=PLi®][quote]ermethic wrote:
Especially the last line, the default script needed to start / stop a softcam is missing on your system and therefore CCcam is not started. You can copy the default from the image back from /var_init/etc/plimgr/scripts
When you have done that I am confident that it works ;-)[/quote]
I had the same problem since yesterday. Also this file was missing from the DM7000. Very strange that this file can just dissapeer.
Any clues?
FTP the file from the DM500 to the DM7000 and CCcam started to work again.
Especially the last line, the default script needed to start / stop a softcam is missing on your system and therefore CCcam is not started. You can copy the default from the image back from /var_init/etc/plimgr/scripts
When you have done that I am confident that it works ;-)[/quote]
I had the same problem since yesterday. Also this file was missing from the DM7000. Very strange that this file can just dissapeer.
Any clues?
FTP the file from the DM500 to the DM7000 and CCcam started to work again.
DM7000, DM500, Deltasat IRCI 1104 on 120cm Dish with lots of LNB's and switches.
Also tagged with one or more of these keywords: DM500
Canal digitaal probleem met kaart heractivatieStarted by Lutz, 7 Jun 2014 dm500, et9000 |
|
|||
HDD problems DM500HD!Started by Elgreco, 4 Nov 2013 DM500, HDD |
|
|||
E1 build failsStarted by pr.malek, 16 Oct 2013 build, enigma1, dm500 |
|
|||
DM500 build CDK libtool errorStarted by xalanaseon, 14 Mar 2013 DM500, CDK, LIBTOOL, ACLOCAL.M4 |
|
|||
DM500 is not workingStarted by wonder4, 12 Mar 2013 dm500 |
|
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users