how can i set the 7020(non HD)to change channels when recording programs?
timer on dm7020
Started by dj999, 11 Feb 2012 23:11
10 replies to this topic
#1
-
- Member
- 13 posts
0
Neutral
Posted 11 February 2012 - 23:11
dreambox7020-1.2m channel master dish:echo3000-R.I.P.
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
Re: timer on dm7020 #2
-
- PLi® Ex-Leden
- 14,151 posts
+52
Good
Posted 12 February 2012 - 13:17
You can create a new timer and instead of "recording" you select "switch" which will switch to that channel. Is that want you mean?
Many answers to your question can be found in our wiki: http://openpli.org/wiki
Re: timer on dm7020 #3
-
- Member
- 13 posts
0
Neutral
Posted 14 February 2012 - 00:58
yes thats wot i mean, after finish recording and to change channel, but i cant see that setting anywhere.
even though i record to an external dvd recorder
even though i record to an external dvd recorder
dreambox7020-1.2m channel master dish:echo3000-R.I.P.
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
Re: timer on dm7020 #4
-
- PLi® Ex-Leden
- 14,151 posts
+52
Good
Posted 14 February 2012 - 13:02
If you add a timer (so, in the timer menu) you will see a selection: record/ngrab/switch etc.
Many answers to your question can be found in our wiki: http://openpli.org/wiki
Re: timer on dm7020 #5
-
- Member
- 13 posts
0
Neutral
Posted 14 February 2012 - 16:07
in the timer section, only getting 'do nothing' 'Standby' or 'Shutdown'
nothing to get a change channel option
using...... software version 2011-08-17
FP version 1.01
nothing to get a change channel option
using...... software version 2011-08-17
FP version 1.01
Edited by dj999, 14 February 2012 - 16:11.
dreambox7020-1.2m channel master dish:echo3000-R.I.P.
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
Re: timer on dm7020 #6
-
- PLi® Core member
- 13,625 posts
+212
Excellent
Posted 14 February 2012 - 16:28
You can create timer for recording or switching and then you can tell, what will be box make after finishing this timer - will be do nothing, go to standby or shutdown.
I think, it is not possible tell to box, that after recording with timer from ch1 switch to ch2.
Explain, what exactly you want.
I did not watch long time 7020, but i think, when you have created timer for recording from ch2 and you set before it box to standby on ch1, then timer is recording from ch2 and after wakeup box will be still on channel1.
Recording has priority => If you wake up in time, when is still recording and ch1 is on different transponder than ch2, recording continues and you seeing black screen.
I think, it is not possible tell to box, that after recording with timer from ch1 switch to ch2.
Explain, what exactly you want.
I did not watch long time 7020, but i think, when you have created timer for recording from ch2 and you set before it box to standby on ch1, then timer is recording from ch2 and after wakeup box will be still on channel1.
Recording has priority => If you wake up in time, when is still recording and ch1 is on different transponder than ch2, recording continues and you seeing black screen.
Kdo nic nedělá, nic nezkazí!
Re: timer on dm7020 #7
-
- Member
- 13 posts
0
Neutral
Posted 14 February 2012 - 17:03
for example, if i record a film/program etc...overnight and want the dreambox to be on a music channel in the morning, how?
i could do it previously with gemini4.7. but cannot see this option, to record/change another channel
i could do it previously with gemini4.7. but cannot see this option, to record/change another channel
dreambox7020-1.2m channel master dish:echo3000-R.I.P.
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
Re: timer on dm7020 #8
-
- PLi® Core member
- 13,625 posts
+212
Excellent
Posted 14 February 2012 - 17:07
if you want it, set for morning timer: switch
Kdo nic nedělá, nic nezkazí!
Re: timer on dm7020 #9
-
- Member
- 13 posts
0
Neutral
Posted 14 February 2012 - 17:16
where is that option?if you want it, set for morning timer: switch
dreambox7020-1.2m channel master dish:echo3000-R.I.P.
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
Re: timer on dm7020 #10
-
- PLi® Core member
- 13,625 posts
+212
Excellent
Posted 14 February 2012 - 17:26
when you are there in Timer screen, it is in combobox, above "Save". There is switch, record, ngrab.
Or when you are in EPG, press BLUE button => is created Switch timer
Or when you are in EPG, press BLUE button => is created Switch timer
Kdo nic nedělá, nic nezkazí!
Re: timer on dm7020 #11
-
- Member
- 13 posts
0
Neutral
Posted 15 February 2012 - 00:54
oooooooooops wot an idiot been. wasnt looking in the right place. found it now, thanks mate
dreambox7020-1.2m channel master dish:echo3000-R.I.P.
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
2 dragons, 2 xcams, black & red via cams, seca cam, conax cam, mrl cams, mrv cam, red zeta cam, CAS 3, phoenix infinity, and a ****(22) load of cards..including cerebro, wild, m2, knot1(x2), k3, opos 1.03 & 1.05, tits & recently added anaconda card, diablo(pain) & t-rex super4.6 & now gammacard & gigacam.....
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
