27 replies to this topic

[Ampersand]

I was using crossepg but now I tested with xmltvimport and here it is log:

[EPGImport] autostart (0) occured at 1330102360.96
[EPGImport] autostart (0) occured at 1330102365.12
[EPGImport] WakeUpTime now set to -1 (now=1330102365)
[EPGImport] WakeUpTime now set to -1 (now=1330102720)
[EPGImport] WakeUpTime now set to -1 (now=1330102780)
[EPGImport] using source http://www.xmltvepg.nl/rytec.sources.xml
[EPGImport] nextImport, source= Rytec Poland XMLTV
[EPGImport] Downloading: http://www.xmltvepg.nl/rytecxmltvpoland.gz to local path: /media/cf/epgimport.gz
[EPGImport] afterDownload /media/cf/epgimport.gz
[EPGImport] Parsing channels from 'http://www.xmltvepg.nl/rytec.channels.xml.gz'
[EPGImport] unlink /media/cf/epgimport.gz
[XMLTVConverter] Enumerating event information
Unknown channel:  Jetix.pl
Unknown channel:  iTVN.pl
Unknown channel:  ViasatExplorer.pl
Unknown channel:  ViasatHistory.pl
Unknown channel:  CNBC.pl
Unknown channel:  TVtrwam.pl
Unknown channel:  TVNPlus1.pl
Unknown channel:  NickJr.pl
Unknown channel:  EurosportHD.pl
Unknown channel:  TVP3.pl
Unknown channel:  MTV2.pl
Unknown channel:  NickelodeonHD.pl
Unknown channel:  TVtrwam.pl
Unknown channel:  MTVNHDPlus1.pl
Unknown channel:  nFilmHD2.pl
Unknown channel:  ViasatNature.pl
Unknown channel:  TravelChannelHD.eu
[EPGImport] imported 29707 events
[EPGImport] no Oudeis patch, load(/media/hdd/epg_new.dat) required
[EPGImport] #### Finished ####
[EPGImport] connectionLost [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionFdescWentAway'>: Uh: Filedescriptor went away.
]
[EPGImport] WakeUpTime now set to -1 (now=1330103057)

After enigma2 restart, file epg_new.dat is still on hdd and epg not available.

[doglover]

You are importing the polish package, and only the polish package.
You have had 29707 events imported which is normal. The data comes from websites which are current. You should have therefore epg in your box for the polish package.

Also from the log I can see you are using an image which requires an enigma2 restart to load the data. I do not have much experience with this kind of images, but I know that in this case the epg_new.dat is not loaded when enigma2 restarts. In order to get loaded. epg_new.dat has to be renamed to epg.dat after enigma2 stops and this file will load when enigma2 opens again.

This has not happened.

So which image do you use, and can somebody help with this particular image?

Willy.

I would recommend to change the image to OpenPli.

[Ampersand]

At the moment I use rudream but with merlin+gp3 had the same problem. I will try OpenPli to see the difference. Thx for support anyway.

[doglover]

I am thinking of something.

Look if there is a setting somewhere which sets the location of the epg (epg.dat file). Make sure this points to the same location as where you found the epg_new.dat file. Also set the filename to the standard epg.dat.

In order to test if the rename is the problem, you could do the following:

1. Import a package
2. After the import, in telnet, stop enigma2 with: init 4<ENTER>
3. Now rename the epg_new.dat file to : epg.dat
4. Restart enigma2 with: init 3<ENTER>

Willy

[Ampersand]

I have found something. As you wrote, I had epg location on cf. Now I changed it to hdd and if I restart enigma2 after import,system renames epg_new.dat to epg.dat itself and import it, epg is visible but I have a crash when try to open epg on channel sellection. Crashlog is empty and two other files are created:time_map.txt and event_map.txt.

[doglover]

Sorry, but this is outside my knowledge. Different image.

Since Crossepg uses the same method of loading the epg, as XMLTV importer. You may retry crossepg now you have fixed the import. Crossepg uses the same sources for the epg, so I am afraid the result would be the same.
But trying cannot hurt.

Willy

[Ampersand]

Thx anyway for trying.

[Ampersand]

Crossepg is working again, so looks like a location of epg.dat was a problem. Thx.