1 reply to this topic

[elman]

image: OpenPli 2.1
Kernel Version: 3.2.2
Enigma : Mart 11 2012
When i click on the initialization of an error
" no displayable files on this medium found!"

record and timeshift did not work once an error that the hard drive is not connected

here is the result of commands in telnet:


OpenEmbedded Linux et9x00

openpli 2.1 et9x00
et9x00 login: root
root@et9x00:~# sfdisk -l
Disk /dev/mtdblock0: 16 cylinders, 255 heads, 63 sectors/track
sfdisk: ERROR: sector 0 does not have an msdos signature
/dev/mtdblock0: unrecognized partition table type
No partitions found
Disk /dev/mtdblock1: 0 cylinders, 255 heads, 63 sectors/track
sfdisk: ERROR: sector 0 does not have an msdos signature
/dev/mtdblock1: unrecognized partition table type
No partitions found
Disk /dev/mtdblock2: 15 cylinders, 255 heads, 63 sectors/track
sfdisk: ERROR: sector 0 does not have an msdos signature
/dev/mtdblock2: unrecognized partition table type
No partitions found
Disk /dev/sda: 60801 cylinders, 255 heads, 63 sectors/track
Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0
Device Boot Start End #cyls #blocks Id System
/dev/sda1 0+ 60801- 60802- 488386580 83 Linux
/dev/sda2 0 - 0 0 0 Empty
/dev/sda3 0 - 0 0 0 Empty
/dev/sda4 0 - 0 0 0 Empty
root@et9x00:~# df -h
Filesystem Size Used Available Use% Mounted on
ubi0:rootfs 104.7M 61.7M 43.0M 59% /
tmpfs 64.0K 4.0K 60.0K 6% /dev
tmpfs 142.4M 628.0K 141.8M 0% /var/volatile
/dev/sda1 465.7G 223.6M 465.5G 0% /media/sda1
root@et9x00:~# mount
rootfs on / type rootfs (rw)
ubi0:rootfs on / type ubifs (rw,relatime)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /dev type tmpfs (rw,relatime,size=64k,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
usbfs on /proc/bus/usb type usbfs (rw,relatime)
tmpfs on /var/volatile type tmpfs (rw,relatime)
/dev/sda1 on /media/sda1 type ext4 (rw,relatime,barrier=1,data=ordered)
root@et9x00:~#

[Sergei]

I was able to fix the problem:

Go the the harddisk menu, format the drive with the red button, confirm with ok, now, don't close the harddisk screen, leave it open for about 10 minutes.
After that, shut down the et-9000 completely, even best switch on the back : off
Wait 10 seconds, switch the et-9000 back on.

Now, go to the file explorer and check that a folder media is available.
if not, hit the menu key and choose add folder.
Add the folder and close the menu, restart the et-9000.
Once restarted, You should be able to record.

Keep an eye to the maximum harddisk size.

Edited by Sergei, 11 March 2012 - 18:16.