59 replies to this topic

[Dimitrij]

The package is designed for software based on openPli.

The package includes:
-plugin InstallerDriverGPRS (automatic installation of all drivers ppp to internet)
-plugin Mopedus (to configure the modem)
-utility picocom (to switch between the modem details in google)
P.S.If you need a firewall (details in google)
In telnet:
opkg install iptables

[Rob van der Does]

Probably a very stupid question, but: what's it good for? I noticed the plugin 'Mopedus' being installed, but...?

[Dimitrij]

Run InstallerDriverGPRS,reboot and configure the modem to plugin 'Mopedus'.

[fairbird]

Hello m8...
first thank you for tools..
secondly i have tried with Dm800pvr but does not worked ...can you explain how to set right settings please..
my usb is "huawei mobile broadband e173"
and in attach dmesg.log and mopedus-connect.log

Thank you advance..

Attached Files

•  dmesg.log   15.23KB   20 downloads
•  mopedus-connect.log   430bytes   15 downloads
•  screenshot1.png   49.96KB   80 downloads
•  screenshot2.png   33.86KB   71 downloads

[Dimitrij]

@fairbird
1)in telnet:

rm -rf /etc/modutils/ftdi_sio
rm -rf /etc/modutils/pl2303
update-modules
reboot

2)If not work, give a reply from telnet:

ls -la /etc/modutils

Edited by Dima73, 2 June 2012 - 07:14.

[fairbird]

Thank you to replay...
Does not worked...
In attach telent for modutils out put...

Attached Files

•  modutils.log   1.46KB   9 downloads

Edited by fairbird, 2 June 2012 - 15:19.

[fairbird]

Forget last post...
Update...
Beacuse i have used before some image based on openpli...
Now i use openpli 2.1...and here is in attach logos files...
Sorry and Thank you..

Attached Files

•  dmesg.log   15.1KB   7 downloads
•  mopedus-connect.log   430bytes   3 downloads
•  modutils.log   1.39KB   2 downloads

[Dimitrij]

rm -rf /etc/modutils/belkin_sa

rm -rf /etc/modutils/keyspan

update-modules

reboot

[fairbird]

thank you..
Still does not worked...

Attached Files

•  screenshot.jpg   80.49KB   39 downloads
•  modutils.log   1.39KB   2 downloads

[Dimitrij]

Put in the new PLi for the test.
I do not know what kind of date ...
-rw-r--r-- 1 root root 10 Jun 2 17:43 usbserial

[fairbird]

Thank you...
i have tried to put that line by telnet but i can not so i put it manualy "-rw-r--r-- 1 root root 10 Jun 2 17:43 usbserial" in usbserial file on this path /etc/modutils and do restart enigma2 then try plugin again but does not worked..

Attached Files

•  modutils.log   1.39KB   2 downloads

Edited by fairbird, 2 June 2012 - 20:40.

[Dimitrij]

in telnet:
opkg remove kernel-module-usbserial
reboot
in telnet:
opkg install kernel-module-usbserial

Edited by Dima73, 2 June 2012 - 21:17.

[fairbird]

Thank you m8...
But still does not worked.. after remove and install kernal of usbserial..

Attached Files

•  modutils.log   1.39KB   4 downloads

Edited by fairbird, 2 June 2012 - 22:30.

[Dimitrij]

in telnet:

rm -rf /etc/modutils/usbserial
update-modules
reboot

in telnet:

lsmod
dmesg > /tmp/dmesg.log

run modem

lsmod
dmesg > /tmp/dmesg.log

You do not load the driver usbserial.
Why, I do not know.
By modem, this ratio does not.
Here is the correct log:

PPP generic driver version 2.4.2
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbserial_generic 2-1.1:1.0: generic converter detected
[color=#ff0000]usb 2-1.1: generic converter now attached to ttyUSB0[/color]
usbserial_generic 2-1.1:1.1: generic converter detected
[color=#ff0000]usb 2-1.1: generic converter now attached to ttyUSB1[/color]
usbserial_generic 2-1.1:1.2: generic converter detected
[color=#ff0000]usb 2-1.1: generic converter now attached to ttyUSB2[/color]
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
PPP BSD Compression module registered
PPP Deflate Compression module registered

[fairbird]

I made what you mentioned but still nothing...and here result for logo and picture...
and about load the driver usbserial...how can i do it...
My steps is...
1-Downloaded your tools.
2-installted.
3-made restart engima2
4-opened mppedus and made settings as pictures in first replay.
This is my steps...

Thank you advance...

Attached Files

•  1.jpg   40.52KB   34 downloads
•  before-run-modem-dmesg.log   14.99KB   5 downloads
•  after-run-modem-dmesg.log   15.19KB   5 downloads

[Dimitrij]

I can not help.
I do not see your modem.
What is VFS?
Place the new image, remove the unnecessary loading of the driver /etc/modutils.
And only then start InstallerDriverGPRS.

[fairbird]

Ok mate...i use openpli on mutiboot on external flash...i wil flash clean image openpli on internal flash now to make it test and install only enigma2-plugins-extensions-gprstools_1.0-rc1
what mean about VFS?

Edited by fairbird, 3 June 2012 - 17:40.

[fairbird]

Hi m8...I appreciate your trouble with me

1-Flash new openpli 2.1 up to date on flash.
2-installed only gprstools as picture below.
3-made restart engima2.
4-opened mppedus and made settings made connect but does not worked as pictures below.
5-I made in telnet:
rm -rf /etc/modutils/usbserial
update-modules
reboot
also does not worked
6-I made:
lsmod
dmesg > /tmp/dmesg.log

Any idea....Thank you

Attached Files

•  1.jpg   37.06KB   24 downloads
•  2.jpg   34.87KB   35 downloads
•  3.jpg   122.96KB   36 downloads
•  4.jpg   77.48KB   34 downloads
•  5.jpg   76.14KB   20 downloads
•  dmesg.log   14.87KB   0 downloads

[fairbird]

Ops..i forget to installer Drivers GPRS...
I have installed and reboot then try mopedus but does not work..

here dmesg after download drivers and made connect on mopedus..

Attached Files

•  dmesg.log   14.68KB   5 downloads

Edited by fairbird, 3 June 2012 - 22:40.

[fairbird]

By the way i got error download in some of packages..

Attached Files

•  1.jpg   56.25KB   34 downloads
•  2.jpg   64.92KB   32 downloads