11 replies to this topic

[pappaalfio]

Good morning
I Have this problem on vuultimo with pli 2.1:
starting from the wizard of installation, I introduce the parameters of the tuners and when enter in the image I verify from the menu that the tuners are not configured.
If I configure them instead from Menu the configuration is saved.
Some suggestion? Thanks

[spock]

This happen on my ultimo too, but only when I try to configure the dvb-t tuner during the wizard (iirc).

I also often get a green screen when trying to scan the dvb-t tuner, but after fresh reboot/restart of enigma it always scans properly..

Edited by spock, 14 March 2012 - 15:53.

[pappaalfio]

any suggestion?

[spock]

no suggestions.. maybe some dev will see this thread and give some information on how we can help them solve the problem.

[Dimitrij]

Some suggestion? Thanks

Not to Use the setup wizard.

[pieterg]

green screen = crash log

[spock]

green screen only for trying to scan a dvb-t transponder. from my experience it always fails if the box has been running for a while.. but just after restart/reboot it scans fine with no green screen.

the setup wizard does not produce green screen, it just doesn't save any of the settings.

<?xml version="1.0" encoding="utf-8"?>
<opendreambox>
<enigma2>
  <crashdate>Mon Mar 12 00:53:20 2012</crashdate>
  <compiledate>Mar 11 2012</compiledate>
  <contactemail>crashlog@dream-multimedia-tv.de</contactemail>
  <!-- Please email this crashlog to above address -->
  <skin>PLi-HD/skin.xml</skin>
  <sourcedate>Mar 11 2012</sourcedate>
  <branch>(no branch)</branch>
  <rev></rev>
  <version>3.0.0</version>
</enigma2>
<image>
  <dreamboxmodel>dm8000</dreamboxmodel>
  <kernelcmdline>bmem=232M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
  <nimsockets>NIM Socket 0:</nimsockets>
  <imageversion>
   <!-- No such file or directory -->
  </imageversion>
  <imageissue>
   <![CDATA[
OpenEmbedded Linux %h
 
openpli 2.1 %h
]]>
  </imageissue>
</image>
<crashlogs>
  <enigma2crashlog>
   <![CDATA[
eached rl 70
---- opening lame channel db
reading services (version 4)
loaded 4409 services
scanning for frontends..
opening frontend 0
detected satellite frontend
close frontend 0
opening frontend 1
detected satellite frontend
close frontend 1
opening frontend 2
detected cable frontend
close frontend 2
found 1 adapter, 3 frontends(3 sim) and 5 demux, boxtype 4
RTC not ready... wait for transponder time
[EPGC] Initialized EPGCache (wait for setCacheFile call now)
Loading spinners...
found 4 spinner!
setIoPrio best-effort level 3 ok
main thread is non-idle! display spinner!
couldn't open fp
[Harddisk] enumerating block devices...
new Harddisk sda -> /dev/sda -> /dev/sda
[ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda')
Reading satellites.xml
Reading cables.xml
couldn't open /etc/tuxbox/cables.xml!!
tunerTypeChanged feid 2 from 0 to mode 1
opening frontend 2
close frontend 2
opening frontend 2
detected terrestrial frontend
sec config cleared
setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes
setSlotInfo for dvb frontend 1 to slotid 1, descr Vuplus DVB-S NIM, need rotorworkaround No, enabled No, DVB-S2 Yes
setSlotInfo for dvb frontend 2 to slotid 2, descr Vuplus DVB-T NIM, need rotorworkaround No, enabled Yes, DVB-S2 No
slot: 0 configmode: simple
diseqcmode:  diseqc_a_b_c_d
slot: 1 configmode: nothing
sec config completed
loading bouquet... /etc/enigma2/bouquets.tv
loading bouquet... /etc/enigma2/userbouquet.digta_ert.tv
11 entries in Bouquet userbouquet.digta_ert.tv
loading bouquet... /etc/enigma2/userbouquet.nova_greece.tv
64 entries in Bouquet userbouquet.nova_greece.tv
loading bouquet... /etc/enigma2/userbouquet.sky_uk.tv
392 entries in Bouquet userbouquet.sky_uk.tv
loading bouquet... /etc/enigma2/userbouquet.sky_italia.tv
342 entries in Bouquet userbouquet.sky_italia.tv
loading bouquet... /etc/enigma2/userbouquet.canalsat_spain.tv
238 entries in Bouquet userbouquet.canalsat_spain.tv
loading bouquet... /etc/enigma2/userbouquet.canal_digitaal.tv
36 entries in Bouquet userbouquet.canal_digitaal.tv
loading bouquet... /etc/enigma2/userbouquet.cyfra_polsat_n.tv
293 entries in Bouquet userbouquet.cyfra_polsat_n.tv
loading bouquet... /etc/enigma2/userbouquet.sky_germany.tv
74 entries in Bouquet userbouquet.sky_germany.tv
loading bouquet... /etc/enigma2/userbouquet.digital_.tv
91 entries in Bouquet userbouquet.digital_.tv
loading bouquet... /etc/enigma2/userbouquet.xxx.tv
45 entries in Bouquet userbouquet.xxx.tv
loading bouquet... /etc/enigma2/userbouquet.favourites.tv
0 entries in Bouquet userbouquet.favourites.tv
loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv
5 entries in Bouquet userbouquet.LastScanned.tv
loading bouquet... /etc/enigma2/userbouquet.telenor__tv_.tv
120 entries in Bouquet userbouquet.telenor__tv_.tv
13 entries in Bouquet bouquets.tv
loading bouquet... /etc/enigma2/bouquets.radio
loading bouquet... /etc/enigma2/userbouquet.favourites.radio
0 entries in Bouquet userbouquet.favourites.radio
1 entries in Bouquet bouquets.radio
[eDVBLocalTimeHandler] enable sync local time with transponder time!
/usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead
[Ipkg] Added to OPKG destinations: /media/hdd
add dreampackage scanner plugin
added
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement)
- double buffering available!
4050kB available for acceleration surfaces.
resolution: 1280 x 720 x 32 (stride: 5760)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular)
[FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD)
[FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console)
[FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed)
[FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs)
[FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD)
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language English
cannot open /proc/stb/avs/0/input_choices
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
[SETTING] getFlushSize= 0
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 76
setLCDBrightness 127
FIXME: request for unknown slot
FIXME: request for unknown slot
[Picon] adding path: /picon/
/usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
Plugin  Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[AudioSync] set language to  en
[AudioSync] set language to  en
[NetworkBrowser] set language to  en
[NetworkBrowser] set language to  en
[AutoMount.py] self.automounts without mounts {}
[NetworkBrowser] fallback to default translation for NetworkBrowser
[NetworkBrowser] fallback to default translation for Search for network shares
[NetworkBrowser] fallback to default translation for MountManager
[NetworkBrowser] fallback to default translation for Manage network shares
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
[AutoShutDown] set language to  en
[AutoShutDown] set language to  en
[AutoShutDown] fallback to default Enigma2 Translation for Standby
[AutoShutDown] fallback to default Enigma2 Translation for Deepstandby
[AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown Setup
[AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown for VU+
getModeList for port DVI-PC
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI-PC
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
setMode - port: DVI mode: 1080i rate: multi
-> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
[EPGImport] autostart (0) occured at 46.062723
starting hotplug handler
It's now  Thu Jan  1 02:00:46 1970
[timer.py] next activation: 146 (in 99908 ms)
[TIMER] record time changed, start prepare is now: Sat Mar 17 07:59:40 2012
Possible Bug: unknown Conflict!
[Timer] Record <RecordTimer.RecordTimerEntry object at 0x126cd70>
It's now  Thu Jan  1 02:00:46 1970
next real activation is Sat Mar 17 07:59:40 2012
[timer.py] next activation: 146 (in 99876 ms)
[TIMER] record time changed, start prepare is now: Sun Mar 18 07:59:40 2012
Possible Bug: unknown Conflict!
[Timer] Record <RecordTimer.RecordTimerEntry object at 0x126ce10>
It's now  Thu Jan  1 02:00:46 1970
next real activation is Sat Mar 17 07:59:40 2012
[timer.py] next activation: 146 (in 99861 ms)
It's now  Thu Jan  1 02:00:46 1970
[timer.py] next activation: 146 (in 99798 ms)
[EPGImport] autostart (0) occured at 46.21648
[EPGImport] WakeUpTime now set to 30300 (now=46)
[FanControl2] Starting up
[FanControl2] ATA(WDC WD10EADS-00M) /dev/sda Mode:auto
[FanControl2] HDD Temperature not readable
[FanControl2] HDD supports Temp reading without Spinup
[FanControl2] HDD Temp 0C
[SKIN] Parsing embedded skin <embedded-in-'FanControl2'>
[AutoShutDown] start....
[EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat'
not showing fine-tuning wizard, config variable doesn't exist
showtestcard is false
[SKIN] Parsing embedded skin <embedded-in-'Dummy'>
setValue 80
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 80 80 (raw)
Setvolume: 13 13 (-1db)
close frontend 2
warning, skin is missing element From in <class 'Screens.Dish.Dish'>
warning, skin is missing element Goto in <class 'Screens.Dish.Dish'>
RemovePopup, id = ZapError
main thread is non-idle! display spinner!
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
playing 1:0:1:2:1:FF32:EEEE0000:0:0:0:
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0001:ff32
opening frontend 2
(2)tune
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:2:1:FF32:EEEE0000:0:0:0:
allocate demux
child has terminated
pipes closed
0.0.0.0
169.254
192.168
nameservers: [[xxx]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [xxx], 'up': True, 'mac': 'xxx', 'dhcp': True, 'netmask': [255, 255, 255, 0], 'gateway': [xxx]}}
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
poll: unhandled POLLERR/HUP/NVAL for fd 32(16)
[SEC] startTuneTimeout 5000
[SEC] setVoltage 0
[SEC] setFrontend 1
setting frontend 2
(2)fe event: status 0, inversion off, m_tuning 1
(2)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x19154c0 running
no version filtering
0014:  70 00 00 00 00 00
mask:  fc 00 00 00 00 00
mode:  00 00 00 00 00 00
[eEPGCache] channel 0x19154c0 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0081), and 1 audio stream(s) (0281), and the pcr pid is 0081, and the text pid is 0241
allocate demux
decoder state: play, vpid=129, apid=641
DMX_SET_PES_FILTER(0x81) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x281) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x81) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x241) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
no version filtering
0000:  00 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
no version filtering
0012:  4e 00 02 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
+ 1/1 TID 00
done!
PATready
use pmtpid 0101 for service_id 0002
no version filtering
0101:  02 00 02 00 00 00
mask:  ff ff ff 00 00 00
mode:  00 00 00 00 00 00
doing version filtering
0000:  00 00 00 03 00 00
mask:  ff 00 00 3f 00 00
mode:  00 00 00 3e 00 00
+ 1/1 TID 02
done!
eventNewProgramInfo 0 0
no version filtering
0226:  74 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
have 1 video stream(s) (0081), and 1 audio stream(s) (0281), and the pcr pid is 0081, and the text pid is 0241
decoder state: play, vpid=129, apid=641
no version filtering
0226:  74 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
[eDVBCAService] new service 1:0:1:2:1:FF32:EEEE0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:2:1:FF32:EEEE0000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 0 mask 01 prevhash 0
doing version filtering
0101:  02 00 02 03 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
+ 1/1 TID 74
done!
AITready
no version filtering
0227:  3c 00 00 00 00 00
mask:  ff 00 00 00 00 00
mode:  00 00 00 00 00 00
sdt update done!
+- 1/2 TID 4e
++ 2/2 TID 4e
done!
doing version filtering
0012:  4e 00 02 0b 00 00
mask:  ff ff ff 3f 00 00
mode:  00 00 00 3e 00 00
---------------------------------------------------------------------+ 1/70 TID 3c
kaputt max(23) < ssize(70) || nr(22) >= max(23)
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 00:52:36
[eDVBLocalTimerHandler] m_time_difference is 1331506301
[eDVBLocalTimerHandler] set Linux Time
[EPGC] time updated.. start EPG Mainloop
kaputt max(11) < ssize(70) || nr(10) >= max(11)
kaputt max(1) < ssize(70) || nr(0) >= max(1)
kaputt max(7) < ssize(70) || nr(6) >= max(7)
kaputt max(11) < ssize(70) || nr(10) >= max(11)
kaputt max(8) < ssize(70) || nr(7) >= max(8)
[FanControl2] Fan Reset
[FanControl2] Vlt:255 Pwm:5 Fan:4pin   - BoxOn HDDon
[FanControl2] currentRPM:800 targetRPM:800 Temp: 0.1
---------------------------------------------------------------------+ 1/70 TID 3c
kaputt max(23) < ssize(70) || nr(22) >= max(23)
kaputt max(11) < ssize(70) || nr(10) >= max(11)
timeout 0227!
OCready
[EPGC] 11447 events read from /media/hdd/epg.dat
[EPGC] 451746 bytes for cache used
[EPGC] next update in 2 sec
[EPGC] start caching events(1331506367)
[FanControl2] Vlt:255 Pwm:5 Fan:4pin   - BoxOn HDDon
[FanControl2] currentRPM:800 targetRPM:800 Temp: 0.1
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[EPGC] schedule other finished(1331506374)
[EPGC] nownext finished(1331506375)
[EPGC] schedule finished(1331506376)
[EPGC] stop caching events(1331506376)
[EPGC] next update in 60 min
[FanControl2] Vlt:255 Pwm:5 Fan:4pin   - BoxOn HDDon
[FanControl2] currentRPM:800 targetRPM:800 Temp: 0.1
action ->  GlobalActions volumeDown
Setvolume: 75 75 (raw)
Setvolume: 16 16 (-1db)
setValue 75
action ->  GlobalActions volumeDown
Setvolume: 70 70 (raw)
Setvolume: 19 19 (-1db)
setValue 70
action ->  GlobalActions volumeDown
Setvolume: 65 65 (raw)
Setvolume: 23 23 (-1db)
setValue 65
action ->  GlobalActions volumeDown
Setvolume: 60 60 (raw)
Setvolume: 26 26 (-1db)
setValue 60
action ->  GlobalActions volumeDown
Setvolume: 55 55 (raw)
Setvolume: 29 29 (-1db)
setValue 55
action ->  InfobarChannelSelection switchChannelDown
channel not found!
channel not found!
channel not found!
channel not found!
channel not found!
channel not found!
channel not found!
action ->  OkCancelActions cancel
action ->  InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
[FanControl2] Vlt:255 Pwm:5 Fan:4pin   - BoxOn HDDon
[FanControl2] currentRPM:800 targetRPM:800 Temp: 0.1
action ->  OkCancelActions ok
okbuttonClick
ParentalControlSetup ParentalControlSetup
action ->  OkCancelActions ok
okbuttonClick
Satconfig NimSelection
ScanSetup ScanSimple
ScanSetup ScanSetup
action ->  OkCancelActions ok
okbuttonClick
ID:  0
action ->  SetupActions left
unknown action SetupActions/left! typo in keymap?
action ->  SetupActions left
cur is ('Tuner', <Components.config.ConfigSelection object at 0x18aa030>)
ID:  2
action ->  SetupActions right
unknown action SetupActions/right! typo in keymap?
action ->  SetupActions right
cur is ('Type of scan', <Components.config.ConfigSelection object at 0x18a3150>)
ID:  2
[FanControl2] Vlt:255 Pwm:5 Fan:4pin   - BoxOn HDDon
[FanControl2] currentRPM:800 targetRPM:800 Temp:39.0
action ->  SetupActions ok
nim 2
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
  File "/usr/lib/enigma2/python/Screens/ScanSetup.py", line 839, in keyGo
  File "/usr/lib/enigma2/python/Components/NimManager.py", line 618, in getTerrestrialDescription
IndexError: list index out of range
(PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x19da3a0>>,('SetupActions', 'ok')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
  </enigma2crashlog>
</crashlogs>
</opendreambox>

Edited by spock, 15 March 2012 - 15:48.

[spock]

Any other information I can provide?

[pappaalfio]

it apologizes for the delay
no, any crashes any green screen
it's all!

[spock]

another crash log.

devs - this happens half the time when trying to scan internal dvb-t tuner on vuultimo.

also as above, setup wizard fails to save tuner configuration on vuultimo (but no green screen = no log).

Attached Files

•  enigma2_crash_1332175469.log   21.22KB   3 downloads

Edited by spock, 19 March 2012 - 17:49.

[pappaalfio]

The green screen appears only if in the configuration of the tuner DTTs don't appear the parameters of the file terrestrial.xml and therefore, starting the search, the crashlog produces him.

In the preceding post I had forgotten to signal the bug that I have explained here.

Sorry for my google-English

[pappaalfio]

. . . same problem on BlackHole , Italysat (based on pli), VTI images; only on vultimo stb not on Vuno and other VU+

Edited by pappaalfio, 23 March 2012 - 18:14.