Problem to save tuners configuration on wizard vuultimo
Started by pappaalfio, 13 Mar 2012 12:47
11 replies to this topic
#1
Posted 13 March 2012 - 12:47
Good morning
I Have this problem on vuultimo with pli 2.1:
starting from the wizard of installation, I introduce the parameters of the tuners and when enter in the image I verify from the menu that the tuners are not configured.
If I configure them instead from Menu the configuration is saved.
Some suggestion? Thanks
I Have this problem on vuultimo with pli 2.1:
starting from the wizard of installation, I introduce the parameters of the tuners and when enter in the image I verify from the menu that the tuners are not configured.
If I configure them instead from Menu the configuration is saved.
Some suggestion? Thanks
Re: Problem to save tuners configuration on wizard vuultimo #2
Posted 14 March 2012 - 15:52
This happen on my ultimo too, but only when I try to configure the dvb-t tuner during the wizard (iirc).
I also often get a green screen when trying to scan the dvb-t tuner, but after fresh reboot/restart of enigma it always scans properly..
I also often get a green screen when trying to scan the dvb-t tuner, but after fresh reboot/restart of enigma it always scans properly..
Edited by spock, 14 March 2012 - 15:53.
Re: Problem to save tuners configuration on wizard vuultimo #3
Re: Problem to save tuners configuration on wizard vuultimo #4
Re: Problem to save tuners configuration on wizard vuultimo #5
Re: Problem to save tuners configuration on wizard vuultimo #6
Re: Problem to save tuners configuration on wizard vuultimo #7
Posted 15 March 2012 - 15:46
green screen only for trying to scan a dvb-t transponder. from my experience it always fails if the box has been running for a while.. but just after restart/reboot it scans fine with no green screen.
the setup wizard does not produce green screen, it just doesn't save any of the settings.
the setup wizard does not produce green screen, it just doesn't save any of the settings.
<?xml version="1.0" encoding="utf-8"?> <opendreambox> <enigma2> <crashdate>Mon Mar 12 00:53:20 2012</crashdate> <compiledate>Mar 11 2012</compiledate> <contactemail>crashlog@dream-multimedia-tv.de</contactemail> <!-- Please email this crashlog to above address --> <skin>PLi-HD/skin.xml</skin> <sourcedate>Mar 11 2012</sourcedate> <branch>(no branch)</branch> <rev></rev> <version>3.0.0</version> </enigma2> <image> <dreamboxmodel>dm8000</dreamboxmodel> <kernelcmdline>bmem=232M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline> <nimsockets>NIM Socket 0:</nimsockets> <imageversion> <!-- No such file or directory --> </imageversion> <imageissue> <![CDATA[ OpenEmbedded Linux %h openpli 2.1 %h ]]> </imageissue> </image> <crashlogs> <enigma2crashlog> <![CDATA[ eached rl 70 ---- opening lame channel db reading services (version 4) loaded 4409 services scanning for frontends.. opening frontend 0 detected satellite frontend close frontend 0 opening frontend 1 detected satellite frontend close frontend 1 opening frontend 2 detected cable frontend close frontend 2 found 1 adapter, 3 frontends(3 sim) and 5 demux, boxtype 4 RTC not ready... wait for transponder time [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... found 4 spinner! setIoPrio best-effort level 3 ok main thread is non-idle! display spinner! couldn't open fp [Harddisk] enumerating block devices... new Harddisk sda -> /dev/sda -> /dev/sda [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sda') Reading satellites.xml Reading cables.xml couldn't open /etc/tuxbox/cables.xml!! tunerTypeChanged feid 2 from 0 to mode 1 opening frontend 2 close frontend 2 opening frontend 2 detected terrestrial frontend sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr Vuplus DVB-S NIM, need rotorworkaround No, enabled Yes, DVB-S2 Yes setSlotInfo for dvb frontend 1 to slotid 1, descr Vuplus DVB-S NIM, need rotorworkaround No, enabled No, DVB-S2 Yes setSlotInfo for dvb frontend 2 to slotid 2, descr Vuplus DVB-T NIM, need rotorworkaround No, enabled Yes, DVB-S2 No slot: 0 configmode: simple diseqcmode: diseqc_a_b_c_d slot: 1 configmode: nothing sec config completed loading bouquet... /etc/enigma2/bouquets.tv loading bouquet... /etc/enigma2/userbouquet.digta_ert.tv 11 entries in Bouquet userbouquet.digta_ert.tv loading bouquet... /etc/enigma2/userbouquet.nova_greece.tv 64 entries in Bouquet userbouquet.nova_greece.tv loading bouquet... /etc/enigma2/userbouquet.sky_uk.tv 392 entries in Bouquet userbouquet.sky_uk.tv loading bouquet... /etc/enigma2/userbouquet.sky_italia.tv 342 entries in Bouquet userbouquet.sky_italia.tv loading bouquet... /etc/enigma2/userbouquet.canalsat_spain.tv 238 entries in Bouquet userbouquet.canalsat_spain.tv loading bouquet... /etc/enigma2/userbouquet.canal_digitaal.tv 36 entries in Bouquet userbouquet.canal_digitaal.tv loading bouquet... /etc/enigma2/userbouquet.cyfra_polsat_n.tv 293 entries in Bouquet userbouquet.cyfra_polsat_n.tv loading bouquet... /etc/enigma2/userbouquet.sky_germany.tv 74 entries in Bouquet userbouquet.sky_germany.tv loading bouquet... /etc/enigma2/userbouquet.digital_.tv 91 entries in Bouquet userbouquet.digital_.tv loading bouquet... /etc/enigma2/userbouquet.xxx.tv 45 entries in Bouquet userbouquet.xxx.tv loading bouquet... /etc/enigma2/userbouquet.favourites.tv 0 entries in Bouquet userbouquet.favourites.tv loading bouquet... /etc/enigma2/userbouquet.LastScanned.tv 5 entries in Bouquet userbouquet.LastScanned.tv loading bouquet... /etc/enigma2/userbouquet.telenor__tv_.tv 120 entries in Bouquet userbouquet.telenor__tv_.tv 13 entries in Bouquet bouquets.tv loading bouquet... /etc/enigma2/bouquets.radio loading bouquet... /etc/enigma2/userbouquet.favourites.radio 0 entries in Bouquet userbouquet.favourites.radio 1 entries in Bouquet bouquets.radio [eDVBLocalTimeHandler] enable sync local time with transponder time! /usr/lib/python2.6/site-packages/twisted/internet/_sslverify.py:5: DeprecationWarning: the md5 module is deprecated; use hashlib instead [Ipkg] Added to OPKG destinations: /media/hdd add dreampackage scanner plugin added [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/ae_AlMateen.ttf...OK (Replacement) - double buffering available! 4050kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5760) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (Regular) [FONT] adding font /usr/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/share/fonts/andale.ttf...OK (Fixed) [FONT] adding font /usr/share/fonts/valis_enigma.ttf...OK (Subs) [FONT] adding font /usr/share/fonts/nmsbd.ttf...OK (FdLcD) [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > Activating keymap: Default (US) [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap Activating language English cannot open /proc/stb/avs/0/input_choices --> setting scaler_sharpness to: 0000000D couldn't open /proc/stb/misc/12V_output [SETTING] getFlushSize= 0 [ePopen] command: ip -o addr show dev eth0 setLCDBrightness 76 setLCDBrightness 127 FIXME: request for unknown slot FIXME: request for unknown slot [Picon] adding path: /picon/ /usr/lib/python2.6/site-packages/twisted/python/filepath.py:12: DeprecationWarning: the sha module is deprecated; use the hashlib module instead Plugin Extensions/WebInterface failed to load: No module named plugin Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface [AudioSync] set language to en [AudioSync] set language to en [NetworkBrowser] set language to en [NetworkBrowser] set language to en [AutoMount.py] self.automounts without mounts {} [NetworkBrowser] fallback to default translation for NetworkBrowser [NetworkBrowser] fallback to default translation for Search for network shares [NetworkBrowser] fallback to default translation for MountManager [NetworkBrowser] fallback to default translation for Manage network shares [NetworkBrowser] fallback to default translation for Mount again [NetworkBrowser] fallback to default translation for Attempt to mount shares again [AutoShutDown] set language to en [AutoShutDown] set language to en [AutoShutDown] fallback to default Enigma2 Translation for Standby [AutoShutDown] fallback to default Enigma2 Translation for Deepstandby [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown Setup [AutoShutDown] fallback to default Enigma2 Translation for AutoShutDown for VU+ getModeList for port DVI-PC getModeList for port YPbPr getModeList for port Scart getModeList for port DVI-PC getModeList for port DVI hotplug on dvi -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto setMode - port: DVI mode: 1080i rate: multi -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto [EPGImport] autostart (0) occured at 46.062723 starting hotplug handler It's now Thu Jan 1 02:00:46 1970 [timer.py] next activation: 146 (in 99908 ms) [TIMER] record time changed, start prepare is now: Sat Mar 17 07:59:40 2012 Possible Bug: unknown Conflict! [Timer] Record <RecordTimer.RecordTimerEntry object at 0x126cd70> It's now Thu Jan 1 02:00:46 1970 next real activation is Sat Mar 17 07:59:40 2012 [timer.py] next activation: 146 (in 99876 ms) [TIMER] record time changed, start prepare is now: Sun Mar 18 07:59:40 2012 Possible Bug: unknown Conflict! [Timer] Record <RecordTimer.RecordTimerEntry object at 0x126ce10> It's now Thu Jan 1 02:00:46 1970 next real activation is Sat Mar 17 07:59:40 2012 [timer.py] next activation: 146 (in 99861 ms) It's now Thu Jan 1 02:00:46 1970 [timer.py] next activation: 146 (in 99798 ms) [EPGImport] autostart (0) occured at 46.21648 [EPGImport] WakeUpTime now set to 30300 (now=46) [FanControl2] Starting up [FanControl2] ATA(WDC WD10EADS-00M) /dev/sda Mode:auto [FanControl2] HDD Temperature not readable [FanControl2] HDD supports Temp reading without Spinup [FanControl2] HDD Temp 0C [SKIN] Parsing embedded skin <embedded-in-'FanControl2'> [AutoShutDown] start.... [EPGC] setCacheFile read/write epg data from/to '/media/hdd/epg.dat' not showing fine-tuning wizard, config variable doesn't exist showtestcard is false [SKIN] Parsing embedded skin <embedded-in-'Dummy'> setValue 80 Setvolume: 100 100 (raw) Setvolume: 0 0 (-1db) Setvolume: 80 80 (raw) Setvolume: 13 13 (-1db) close frontend 2 warning, skin is missing element From in <class 'Screens.Dish.Dish'> warning, skin is missing element Goto in <class 'Screens.Dish.Dish'> RemovePopup, id = ZapError main thread is non-idle! display spinner! child has terminated pipes closed child has terminated pipes closed [ePopen] command: route -n | grep eth0 child has terminated pipes closed poll: unhandled POLLERR/HUP/NVAL for fd 33(16) poll: unhandled POLLERR/HUP/NVAL for fd 35(16) poll: unhandled POLLERR/HUP/NVAL for fd 39(16) playing 1:0:1:2:1:FF32:EEEE0000:0:0:0: not pauseable. RemovePopup, id = ZapError allocate channel.. 0001:ff32 opening frontend 2 (2)tune OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:1:2:1:FF32:EEEE0000:0:0:0: allocate demux child has terminated pipes closed 0.0.0.0 169.254 192.168 nameservers: [[xxx]] read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': True}} self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [xxx], 'up': True, 'mac': 'xxx', 'dhcp': True, 'netmask': [255, 255, 255, 0], 'gateway': [xxx]}} [OpenWebif] loading external plugins... [OpenWebif] no plugins to load [OpenWebif] started on 80 poll: unhandled POLLERR/HUP/NVAL for fd 32(16) [SEC] startTuneTimeout 5000 [SEC] setVoltage 0 [SEC] setFrontend 1 setting frontend 2 (2)fe event: status 0, inversion off, m_tuning 1 (2)fe event: status 1f, inversion off, m_tuning 2 OURSTATE: ok [eDVBLocalTimerHandler] channel 0x19154c0 running no version filtering 0014: 70 00 00 00 00 00 mask: fc 00 00 00 00 00 mode: 00 00 00 00 00 00 [eEPGCache] channel 0x19154c0 running stop release channel timer ok ... now we start!! eventNewProgramInfo 0 0 have 1 video stream(s) (0081), and 1 audio stream(s) (0281), and the pcr pid is 0081, and the text pid is 0241 allocate demux decoder state: play, vpid=129, apid=641 DMX_SET_PES_FILTER(0x81) - pcr - ok DEMUX_START - pcr - ok DMX_SET_PES_FILTER(0x281) - audio - ok DEMUX_START - audio - ok AUDIO_SET_BYPASS(1) - ok AUDIO_PAUSE - ok AUDIO_PLAY - ok Video Device: /dev/dvb/adapter0/video0 demux device: /dev/dvb/adapter0/demux0 VIDEO_SET_STREAMTYPE 0 - ok DMX_SET_PES_FILTER(0x81) - video - ok DEMUX_START - video - ok VIDEO_FREEZE - ok VIDEO_PLAY - ok DMX_SET_PES_FILTER(0x241) - ttx - ok DEMUX_START - ttx - ok VIDEO_SLOWMOTION(0) - ok VIDEO_FAST_FORWARD(0) - ok VIDEO_CONTINUE - ok AUDIO_CONTINUE - ok AUDIO_CHANNEL_SELECT(0) - ok disable teletext subtitles not pauseable. no version filtering 0000: 00 00 00 00 00 00 mask: ff 00 00 00 00 00 mode: 00 00 00 00 00 00 no version filtering 0012: 4e 00 02 00 00 00 mask: ff ff ff 00 00 00 mode: 00 00 00 00 00 00 VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok + 1/1 TID 00 done! PATready use pmtpid 0101 for service_id 0002 no version filtering 0101: 02 00 02 00 00 00 mask: ff ff ff 00 00 00 mode: 00 00 00 00 00 00 doing version filtering 0000: 00 00 00 03 00 00 mask: ff 00 00 3f 00 00 mode: 00 00 00 3e 00 00 + 1/1 TID 02 done! eventNewProgramInfo 0 0 no version filtering 0226: 74 00 00 00 00 00 mask: ff 00 00 00 00 00 mode: 00 00 00 00 00 00 have 1 video stream(s) (0081), and 1 audio stream(s) (0281), and the pcr pid is 0081, and the text pid is 0241 decoder state: play, vpid=129, apid=641 no version filtering 0226: 74 00 00 00 00 00 mask: ff 00 00 00 00 00 mode: 00 00 00 00 00 00 [eDVBCAService] new service 1:0:1:2:1:FF32:EEEE0000:0:0:0: [eDVBCAService] add demux 0 to slot 0 service 1:0:1:2:1:FF32:EEEE0000:0:0:0: [eDVBCIInterfaces] gotPMT demux 0 mask 01 prevhash 0 doing version filtering 0101: 02 00 02 03 00 00 mask: ff ff ff 3f 00 00 mode: 00 00 00 3e 00 00 VIDEO_GET_EVENT - ok VIDEO_GET_EVENT - ok + 1/1 TID 74 done! AITready no version filtering 0227: 3c 00 00 00 00 00 mask: ff 00 00 00 00 00 mode: 00 00 00 00 00 00 sdt update done! +- 1/2 TID 4e ++ 2/2 TID 4e done! doing version filtering 0012: 4e 00 02 0b 00 00 mask: ff ff ff 3f 00 00 mode: 00 00 00 3e 00 00 ---------------------------------------------------------------------+ 1/70 TID 3c kaputt max(23) < ssize(70) || nr(22) >= max(23) [eDVBLocalTimerHandler] dont have correction.. set Transponder Diff [eDVBLocalTimerHandler] update RTC [eDVBLocalTimerHandler] time update to 00:52:36 [eDVBLocalTimerHandler] m_time_difference is 1331506301 [eDVBLocalTimerHandler] set Linux Time [EPGC] time updated.. start EPG Mainloop kaputt max(11) < ssize(70) || nr(10) >= max(11) kaputt max(1) < ssize(70) || nr(0) >= max(1) kaputt max(7) < ssize(70) || nr(6) >= max(7) kaputt max(11) < ssize(70) || nr(10) >= max(11) kaputt max(8) < ssize(70) || nr(7) >= max(8) [FanControl2] Fan Reset [FanControl2] Vlt:255 Pwm:5 Fan:4pin - BoxOn HDDon [FanControl2] currentRPM:800 targetRPM:800 Temp: 0.1 ---------------------------------------------------------------------+ 1/70 TID 3c kaputt max(23) < ssize(70) || nr(22) >= max(23) kaputt max(11) < ssize(70) || nr(10) >= max(11) timeout 0227! OCready [EPGC] 11447 events read from /media/hdd/epg.dat [EPGC] 451746 bytes for cache used [EPGC] next update in 2 sec [EPGC] start caching events(1331506367) [FanControl2] Vlt:255 Pwm:5 Fan:4pin - BoxOn HDDon [FanControl2] currentRPM:800 targetRPM:800 Temp: 0.1 [EPGC] abort non avail netmed schedule reading [EPGC] abort non avail netmed schedule other reading [EPGC] abort non avail FreeSat schedule_other reading [EPGC] abort non avail viasat reading [EPGC] abort non avail mhw reading [EPGC] schedule other finished(1331506374) [EPGC] nownext finished(1331506375) [EPGC] schedule finished(1331506376) [EPGC] stop caching events(1331506376) [EPGC] next update in 60 min [FanControl2] Vlt:255 Pwm:5 Fan:4pin - BoxOn HDDon [FanControl2] currentRPM:800 targetRPM:800 Temp: 0.1 action -> GlobalActions volumeDown Setvolume: 75 75 (raw) Setvolume: 16 16 (-1db) setValue 75 action -> GlobalActions volumeDown Setvolume: 70 70 (raw) Setvolume: 19 19 (-1db) setValue 70 action -> GlobalActions volumeDown Setvolume: 65 65 (raw) Setvolume: 23 23 (-1db) setValue 65 action -> GlobalActions volumeDown Setvolume: 60 60 (raw) Setvolume: 26 26 (-1db) setValue 60 action -> GlobalActions volumeDown Setvolume: 55 55 (raw) Setvolume: 29 29 (-1db) setValue 55 action -> InfobarChannelSelection switchChannelDown channel not found! channel not found! channel not found! channel not found! channel not found! channel not found! channel not found! action -> OkCancelActions cancel action -> InfobarMenuActions mainMenu loading mainmenu XML... TimerEdit TimerEditList PluginBrowser PluginBrowser [FanControl2] Vlt:255 Pwm:5 Fan:4pin - BoxOn HDDon [FanControl2] currentRPM:800 targetRPM:800 Temp: 0.1 action -> OkCancelActions ok okbuttonClick ParentalControlSetup ParentalControlSetup action -> OkCancelActions ok okbuttonClick Satconfig NimSelection ScanSetup ScanSimple ScanSetup ScanSetup action -> OkCancelActions ok okbuttonClick ID: 0 action -> SetupActions left unknown action SetupActions/left! typo in keymap? action -> SetupActions left cur is ('Tuner', <Components.config.ConfigSelection object at 0x18aa030>) ID: 2 action -> SetupActions right unknown action SetupActions/right! typo in keymap? action -> SetupActions right cur is ('Type of scan', <Components.config.ConfigSelection object at 0x18a3150>) ID: 2 [FanControl2] Vlt:255 Pwm:5 Fan:4pin - BoxOn HDDon [FanControl2] currentRPM:800 targetRPM:800 Temp:39.0 action -> SetupActions ok nim 2 Traceback (most recent call last): File "/usr/lib/enigma2/python/Components/ActionMap.py", line 66, in action File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action File "/usr/lib/enigma2/python/Screens/ScanSetup.py", line 839, in keyGo File "/usr/lib/enigma2/python/Components/NimManager.py", line 618, in getTerrestrialDescription IndexError: list index out of range (PyObject_CallObject(<bound method NumberActionMap.action of <Components.ActionMap.NumberActionMap instance at 0x19da3a0>>,('SetupActions', 'ok')) failed) getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??) getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??) getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??) ]]> </enigma2crashlog> </crashlogs> </opendreambox>
Edited by spock, 15 March 2012 - 15:48.
Re: Problem to save tuners configuration on wizard vuultimo #8
Re: Problem to save tuners configuration on wizard vuultimo #9
Re: Problem to save tuners configuration on wizard vuultimo #10
Re: Problem to save tuners configuration on wizard vuultimo #11
Posted 22 March 2012 - 14:52
The green screen appears only if in the configuration of the tuner DTTs don't appear the parameters of the file terrestrial.xml and therefore, starting the search, the crashlog produces him.
In the preceding post I had forgotten to signal the bug that I have explained here.
Sorry for my google-English
In the preceding post I had forgotten to signal the bug that I have explained here.
Sorry for my google-English
Re: Problem to save tuners configuration on wizard vuultimo #12
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users