31 replies to this topic

[ims]

excuse, i was thinking about some different and wrote different... See, if you download and save picons to /picon and if yes, remove it...

[Matsaki]

I just flashed the box with the newest image but the memory still seems to be full (see attachment)

And ny the way, how on earth do I change a skin? I download a skin, but it don't show up in the skin manager??

Attached Files

•  a.log   532bytes   7 downloads

Edited by Matsaki, 20 March 2012 - 21:43.

[ims]

may be - after flash was used autorestore and then you fill it again ?

But now is flash used 88% only. My boh has used 93% :-)

May be, you are downloading some large skin ?

Edited by ims, 20 March 2012 - 22:03.

[Matsaki]

Managed to get a skin and things are going. Looks like there is some conflicts with Crossepg but I have to do some more tests. Here is maybe my most important problem ever on Drambox. Is there any application so I can upload and play i.e mpeg4, avi, XviD, mkv files etc. straight on the box?

From what I understand VLC is only for streaming. And I do upload many TV series to watch. But it takes time to convert to TS every time

And thanks for the help guys!

[Matsaki]

One Month later. I still have some crashed. But I have noticed that they only occur on the channels that have some picture interference's. So maybe it's my old dm7025 that have some problems?

But sometimes when restarting the box it also crashes and I get a error log. If somebody can see what causes the crash?

Thanks!

Attached Files

•  enigma2_crash_946688474.log   4.2KB   5 downloads

[MiLo]

"FATAL: no framebuffer available"
That error usually means that the DMM drivers did not load.

That could only occur at startup, not while watching. Might be an old log?

In any way, on the 7025, stay away from the EPG plugins - they devour lots of RAM which is something the 7025 doesn't have much of.

[Matsaki]

That's right. As I said, I get this when restarting after a crash. I have added nothing to the original OpenPLI image. The log is new, but don't have a timestamp as they occur on startup process I guess.

[nah]

I have similar proplem. It says "No space left on device" . can somebody tell me how to manually uninstall MyTubePlayer (through telnet). The system was working fine before it.
I have tried to run through telnet list_installed, but it says "No space left on device".
I could as a temporary solution use the Harddrive mounted on /media/hdd.
Can it be used, so the system won't crash when I try to use auto timer.

Thanks.

P.S
does is matter that there are two cable cards, but only one of them is attached to a cable. Does that mean that the digital box can't record multiple things at once? Its Dreambox 7025

Edited by nah, 13 May 2012 - 20:30.

[ims]

remove manually /usr/lib/enigma2/python/Plugins/Extensions/MyTube directory and restart GUI. It is all.
It seems, your box is full.

You can try

df -h

in telnet and you will see, how much % is used

Edited by ims, 14 May 2012 - 09:33.

[nah]

I tried removing that directory though local network it said "No space on device"
I tried to get to the directory through telnet (/usr), but it said "Permission denied"
I tried to use chmod to change the security on /usr and it said "No Space left on device"

[MiLo]

Reflash the box. That's by far the quickest and easiest way to get it in working condition. As you have found out bow, deleting files requires writing to the flash, which is full, and thus fails...

For the 7025, install a CF card and use the cf-boot utility/plugin to move everything to the CF card, that solves the out-of-flash problems once and for all.

Edited by MiLo, 14 May 2012 - 14:30.

[nah]

Then the second problem do you have to connect both cablecards to the cable network to get everything out of the hardware or is one enough? Can't theDreambox record multiple shows at once or something else.