Transmission 100% work
Re: Transmission 100% work #21
Re: Transmission 100% work #22
Posted 29 July 2012 - 15:47
dillingerI'd rather have the RECIPE for building the transmission binaries. Who's the author?
http://linux-sat.tv/.../board,7.0.html
GigaBlue UHD Quad 4K /Lunix3-4K/Duo 4K
Re: Transmission 100% work #23
Re: Transmission 100% work #24
Re: Transmission 100% work #25
Re: Transmission 100% work #26
Re: Transmission 100% work #27
Posted 23 September 2012 - 15:04
Transmission crash for me after 20 minutes what can be done?
PLI 2.1
Upgrade to 3.0 and then you'll have a transmission version that was specially crafted for your box. I've been running that for weeks without problem.
I can not leave the "2.1 for the 43W satellite channels are faulty in 3.0, as no concerns pli team but the drivers of the DM, I'm stuck on 2.1.
Re: Transmission 100% work #28
Posted 23 September 2012 - 15:14
Which version?
Transmission crash for me after 20 minutes what can be done?
PLI 2.1
What does crash?
If it does not work, show the output ps w in telnet.
1- Version is enigma2-plugin-extensions-transmission_2.61-r13447_mipsel, But before I tested with your posted and the result was the same!
2- The crash is the image and the sound still hangs in response to the sound too! Do not get green screen. The box hangs completely and only the key off / on to restart!
3-
root@dm7020hd:~# ps w
PID USER VSZ STAT COMMAND
1 root 1740 S init [3]
2 root 0 SW [migration/0]
3 root 0 SWN [ksoftirqd/0]
4 root 0 SW [migration/1]
5 root 0 SWN [ksoftirqd/1]
6 root 0 SW< [events/0]
7 root 0 SW< [events/1]
8 root 0 SW< [khelper]
9 root 0 SW< [kthread]
10 root 0 SW< [kblockd/0]
11 root 0 SW< [kblockd/1]
12 root 0 SW< [khubd]
13 root 0 SW [pdflush]
14 root 0 SW [pdflush]
15 root 0 SW< [kswapd0]
16 root 0 SW< [kswapd1]
17 root 0 SW< [aio/0]
18 root 0 SW< [aio/1]
19 root 0 SW< [ata/0]
20 root 0 SW< [ata/1]
21 root 0 SW< [ata_aux]
22 root 0 SW< [scsi_eh_0]
23 root 0 SW< [scsi_eh_1]
24 root 0 SW [mtdblockd]
62 root 0 SW< [kjournald]
84 root 0 SWN [jffs2_gcd_mtd3]
95 root 0 SW [kcdfsd]
100 root 0 SW< [cifsoplockd]
101 root 0 SW< [cifsdnotifyd]
143 root 0 SW [b_event]
144 root 0 SW [b_idle]
162 root 0 SW< [mpeg]
163 root 0 SW< [mpeg]
174 root 0 SW< [dmx0]
179 root 0 SW< [dmx1]
184 root 0 SW< [dmx2]
189 root 0 SW< [dmx3]
193 root 0 SW< [dmx4]
194 root 0 SW< [dmx_hw_sec]
199 root 0 SW< [ci0]
201 root 0 SW< [ci1]
312 root 1952 S /usr/bin/wdog tpmd
313 root 4336 S tpmd
432 root 3244 S udhcpc -R -b -H dm7020hd -p /var/run/udhcpc.eth0.pid -i eth0
441 daemon 1724 S /sbin/portmap
467 messageb 2724 S /usr/bin/dbus-daemon --system
478 root 2376 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22
481 root 3608 S /usr/sbin/inetd
484 root 13476 S /usr/sbin/smbd
486 root 13476 S /usr/sbin/smbd
487 root 6832 S /usr/sbin/nmbd
490 root 3308 S /sbin/syslogd -n -C64 -m 20
492 root 3244 S /sbin/klogd -n
502 avahi 3468 S avahi-daemon: running [dm7020hd.local]
503 avahi 3468 S avahi-daemon: chroot helper
515 root 20068 S /usr/bin/CCcam
528 root 2792 S /usr/sbin/lighttpd -f /etc/lighttpd.conf
529 root 14048 S /usr/bin/php-cgi
537 root 14048 S /usr/bin/php-cgi
538 root 14048 S /usr/bin/php-cgi
539 root 14048 S /usr/bin/php-cgi
543 root 3244 S /bin/sh /usr/bin/enigma2.sh
548 root 123m S /usr/bin/enigma2
549 root 14048 S /usr/bin/php-cgi
550 root 14048 S /usr/bin/php-cgi
551 root 14048 S /usr/bin/php-cgi
552 root 14048 S /usr/bin/php-cgi
553 root 66472 S N /usr/bin/transmission-daemon -c /hdd/transmission/watch -g /hdd/transmission/config -a *.*.*.* -w /hdd/tr
603 root 0 SW< [kdvb-ad-0-fe-0]
609 root 3564 R telnetd
610 root 3560 S -sh
657 root 3560 R ps w
4- I've noticed that correlates with the number of downloads, the speed is going from 900kb / s usually hangs. Finally, what can be? I believe when I leave only 2 simultaneous download and confine your peers overal max of 250 to 20 gives an improved but downloads and uploads are bad.
My internet is 35mb/3mb.
The port says the transmission is opened.
And utorrent works on windows normal rates maximum download and upload 3.5mb/300 kbs
Re: Transmission 100% work #29
Re: Transmission 100% work #30
Re: Transmission 100% work #31
Re: Transmission 100% work #32
Re: Transmission 100% work #33
Posted 23 September 2012 - 21:28
swap
With your version I received the same error!
enigma2-plugin-extensions-transmission_2.50-r2_mipsel.ipk
How to increase the swapfile for more than 131mb? By way of testing to see if it solves the crashes?
Re: Transmission 100% work #34
Posted 24 September 2012 - 01:46
Attempts to create it manually:
Código:
dd if=/dev/zero of=/hdd/swapfile bs=1024 count=512000
Prepare
Código:
mkswap /hdd/swapfile
Active
Código:
swapon /hdd/swapfile
to turn off
Código:
swapoff /hdd/swapfile
The drac colleague posted this on a Brazilian forum and it worked, but how to implement it to your script Dilma?
Edited by samukets, 24 September 2012 - 01:48.
Re: Transmission 100% work #35
Posted 24 September 2012 - 17:07
Replace the file / usr / bin / queue.sh for this one http://www.4shared.c...kef/queue.html?
Re: Transmission 100% work #36
Re: Transmission 100% work #37
Re: Transmission 100% work #38
Posted 18 November 2012 - 16:11
[H[Jroot@vuduo:~# [6n opkg install transmission Installing transmission (2.61-r0) to root... Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/transmission_2.61-r0_mips32el.ipk. libcurl4: unsatisfied recommendation for curl-certs Installing libcurl4 (7.24.0-r0) to root... Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libcurl4_7.24.0-r0_mips32el.ipk. Installing libgnutls26 (2.12.17-r6.0) to root... Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libgnutls26_2.12.17-r6.0_mips32el.ipk. Installing libtasn1-3 (2.11-r0) to root... Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libtasn1-3_2.11-r0_mips32el.ipk. Installing libgpg-error0 (1.10-r1) to root... Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libgpg-error0_1.10-r1_mips32el.ipk. Installing libgcrypt11 (1.5.0-r0) to root... Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libgcrypt11_1.5.0-r0_mips32el.ipk. Installing libevent (2.0.16-r1) to root... Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libevent_2.0.16-r1_mips32el.ipk. Configuring libgpg-error0. Configuring libgcrypt11. Configuring libevent. Configuring libtasn1-3. Configuring libgnutls26. Configuring libcurl4. Configuring transmission. Adding system startup for /etc/init.d/transmission. Starting transmission-daemon Collected errors: * gz_open: fork: Cannot allocate memory. * pkg_get_installed_files: Error extracting file list from /tmp/opkg-NJImRC/transmission_2.61-r0_mips32el.ipk. * opkg_install_pkg: check_data_file_clashes_change() failed for for files belonging to transmission. root@vuduo:~# [6n
Re: Transmission 100% work #39
Re: Transmission 100% work #40
Posted 18 November 2012 - 21:19
Funnily my RAM was only 52% used when i tried to install this.
And now, after a succesfull install, 57% used.
9 user(s) are reading this topic
0 members, 9 guests, 0 anonymous users