42 replies to this topic

[littlesat]

So I can remove the ipk from our 3rd party feeds?

[Dimitrij]

I'd rather have the RECIPE for building the transmission binaries. Who's the author?

dillinger
http://linux-sat.tv/.../board,7.0.html

[MiLo]

Nevermind, I created a recipe, so transmission 2.61 is available in the feed tomorrow.

[samukets]

Transmission crash for me after 20 minutes what can be done?

PLI 2.1

[Dimitrij]

Transmission crash for me after 20 minutes what can be done?

PLI 2.1

Which version?
What does crash?
If it does not work, show the output ps w in telnet.

Edited by Dima73, 23 September 2012 - 06:41.

[MiLo]

Transmission crash for me after 20 minutes what can be done?
PLI 2.1

Upgrade to 3.0 and then you'll have a transmission version that was specially crafted for your box. I've been running that for weeks without problem.

[samukets]

Transmission crash for me after 20 minutes what can be done?
PLI 2.1

Upgrade to 3.0 and then you'll have a transmission version that was specially crafted for your box. I've been running that for weeks without problem.

I can not leave the "2.1 for the 43W satellite channels are faulty in 3.0, as no concerns pli team but the drivers of the DM, I'm stuck on 2.1.

[samukets]

Transmission crash for me after 20 minutes what can be done?

PLI 2.1

Which version?
What does crash?
If it does not work, show the output ps w in telnet.

1- Version is enigma2-plugin-extensions-transmission_2.61-r13447_mipsel, But before I tested with your posted and the result was the same!

2- The crash is the image and the sound still hangs in response to the sound too! Do not get green screen. The box hangs completely and only the key off / on to restart!

3-

root@dm7020hd:~# ps w
PID USER VSZ STAT COMMAND
1 root 1740 S init [3]
2 root 0 SW [migration/0]
3 root 0 SWN [ksoftirqd/0]
4 root 0 SW [migration/1]
5 root 0 SWN [ksoftirqd/1]
6 root 0 SW< [events/0]
7 root 0 SW< [events/1]
8 root 0 SW< [khelper]
9 root 0 SW< [kthread]
10 root 0 SW< [kblockd/0]
11 root 0 SW< [kblockd/1]
12 root 0 SW< [khubd]
13 root 0 SW [pdflush]
14 root 0 SW [pdflush]
15 root 0 SW< [kswapd0]
16 root 0 SW< [kswapd1]
17 root 0 SW< [aio/0]
18 root 0 SW< [aio/1]
19 root 0 SW< [ata/0]
20 root 0 SW< [ata/1]
21 root 0 SW< [ata_aux]
22 root 0 SW< [scsi_eh_0]
23 root 0 SW< [scsi_eh_1]
24 root 0 SW [mtdblockd]
62 root 0 SW< [kjournald]
84 root 0 SWN [jffs2_gcd_mtd3]
95 root 0 SW [kcdfsd]
100 root 0 SW< [cifsoplockd]
101 root 0 SW< [cifsdnotifyd]
143 root 0 SW [b_event]
144 root 0 SW [b_idle]
162 root 0 SW< [mpeg]
163 root 0 SW< [mpeg]
174 root 0 SW< [dmx0]
179 root 0 SW< [dmx1]
184 root 0 SW< [dmx2]
189 root 0 SW< [dmx3]
193 root 0 SW< [dmx4]
194 root 0 SW< [dmx_hw_sec]
199 root 0 SW< [ci0]
201 root 0 SW< [ci1]
312 root 1952 S /usr/bin/wdog tpmd
313 root 4336 S tpmd
432 root 3244 S udhcpc -R -b -H dm7020hd -p /var/run/udhcpc.eth0.pid -i eth0
441 daemon 1724 S /sbin/portmap
467 messageb 2724 S /usr/bin/dbus-daemon --system
478 root 2376 S /usr/sbin/dropbear -r /etc/dropbear/dropbear_rsa_host_key -p 22
481 root 3608 S /usr/sbin/inetd
484 root 13476 S /usr/sbin/smbd
486 root 13476 S /usr/sbin/smbd
487 root 6832 S /usr/sbin/nmbd
490 root 3308 S /sbin/syslogd -n -C64 -m 20
492 root 3244 S /sbin/klogd -n
502 avahi 3468 S avahi-daemon: running [dm7020hd.local]
503 avahi 3468 S avahi-daemon: chroot helper
515 root 20068 S /usr/bin/CCcam
528 root 2792 S /usr/sbin/lighttpd -f /etc/lighttpd.conf
529 root 14048 S /usr/bin/php-cgi
537 root 14048 S /usr/bin/php-cgi
538 root 14048 S /usr/bin/php-cgi
539 root 14048 S /usr/bin/php-cgi
543 root 3244 S /bin/sh /usr/bin/enigma2.sh
548 root 123m S /usr/bin/enigma2
549 root 14048 S /usr/bin/php-cgi
550 root 14048 S /usr/bin/php-cgi
551 root 14048 S /usr/bin/php-cgi
552 root 14048 S /usr/bin/php-cgi
553 root 66472 S N /usr/bin/transmission-daemon -c /hdd/transmission/watch -g /hdd/transmission/config -a *.*.*.* -w /hdd/tr
603 root 0 SW< [kdvb-ad-0-fe-0]
609 root 3564 R telnetd
610 root 3560 S -sh
657 root 3560 R ps w

4- I've noticed that correlates with the number of downloads, the speed is going from 900kb / s usually hangs. Finally, what can be? I believe when I leave only 2 simultaneous download and confine your peers overal max of 250 to 20 gives an improved but downloads and uploads are bad.

My internet is 35mb/3mb.
The port says the transmission is opened.
And utorrent works on windows normal rates maximum download and upload 3.5mb/300 kbs

[Dimitrij]

This is not my version transmission, sorry.

[samukets]

With your version I received the same error!

enigma2-plugin-extensions-transmission_2.50-r2_mipsel.ipk

[Dimitrij]

With your version I received the same error!

enigma2-plugin-extensions-transmission_2.50-r2_mipsel.ipk

swap

[samukets]

Now I have used 4mb swap ever experienced 128mb, needs more swap?

[samukets]

How to increase the swapfile for more than 131mb? By way of testing to see if it solves the crashes?

With your version I received the same error!

enigma2-plugin-extensions-transmission_2.50-r2_mipsel.ipk

swap

How to increase the swapfile for more than 131mb? By way of testing to see if it solves the crashes?

[samukets]

Attempts to create it manually:



Código:
dd if=/dev/zero of=/hdd/swapfile bs=1024 count=512000

Prepare




Código:
mkswap /hdd/swapfile

Active




Código:
swapon /hdd/swapfile

to turn off


Código:
swapoff /hdd/swapfile

The drac colleague posted this on a Brazilian forum and it worked, but how to implement it to your script Dilma?

Edited by samukets, 24 September 2012 - 01:48.

[samukets]

Script Dima73 modified to provide swap 512mb instead of 128mb.

Replace the file / usr / bin / queue.sh for this one http://www.4shared.c...kef/queue.html?

[samukets]

which boxes you have used the transmission? runs on a dm800 and a 800se?

[MiLo]

Should run on anything, just do "opkg install transmission" and then connect to port 9091 of the box.

[Raitsa]

Problem installing on my Duo:

root@vuduo:~# 
opkg install transmission

Installing transmission (2.61-r0) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/transmission_2.61-r0_mips32el.ipk.
libcurl4: unsatisfied recommendation for curl-certs
Installing libcurl4 (7.24.0-r0) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libcurl4_7.24.0-r0_mips32el.ipk.
Installing libgnutls26 (2.12.17-r6.0) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libgnutls26_2.12.17-r6.0_mips32el.ipk.
Installing libtasn1-3 (2.11-r0) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libtasn1-3_2.11-r0_mips32el.ipk.
Installing libgpg-error0 (1.10-r1) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libgpg-error0_1.10-r1_mips32el.ipk.
Installing libgcrypt11 (1.5.0-r0) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libgcrypt11_1.5.0-r0_mips32el.ipk.
Installing libevent (2.0.16-r1) to root...
Downloading http://downloads.pli-images.org/feeds/openpli-3.0/vuduo/mips32el/libevent_2.0.16-r1_mips32el.ipk.
Configuring libgpg-error0.
Configuring libgcrypt11.
Configuring libevent.
Configuring libtasn1-3.
Configuring libgnutls26.
Configuring libcurl4.
Configuring transmission.
Adding system startup for /etc/init.d/transmission.
Starting transmission-daemon
Collected errors:
* gz_open: fork: Cannot allocate memory.
* pkg_get_installed_files: Error extracting file list from /tmp/opkg-NJImRC/transmission_2.61-r0_mips32el.ipk.
* opkg_install_pkg: check_data_file_clashes_change() failed for for files belonging to transmission.
root@vuduo:~# 

[pieterg]

your box does not have enough RAM to complete the installation.
Temporarily stop e2:

init 4
and try again

(and init 3 afterwards)

[Raitsa]

Thanks pieterg, that helped. Had to remove the old install non-succesful install first.

Funnily my RAM was only 52% used when i tried to install this.

And now, after a succesfull install, 57% used.