15 replies to this topic

[spejsi]

Dear All,

I am very new user of VU+ Duo withE2 Open PLI (Linux vuduo 3.1.1, openpli 2.1). Since yesterday evening I have started to experience crashes of the code every few minutes

In enigma2_crash files I can see a note:


<crashdate>Sun Mar 25 20:04:37 2012</crashdate>
<compiledate>Mar 24 2012</compiledate>
<contactemail>forum at www.openpli.org</contactemail>
<!-- Please email this crashlog to above address -->

So I'd like to understand if I can get any support on these crashes, and where to submit the case/upload crash files

Any help will be appreciated.

Kind regards
SP

[littlesat]

On the hdd or /home/root of your box there should be a .log file. Please post it here (our forum does accept .log files - so no need for zip).

Edited by littlesat, 26 March 2012 - 07:25.

[spejsi]

Ok, then attaching 4 the most recent crash files.

Attached Files

•  enigma2_crash_1332740046.log   16.98KB   4 downloads
•  enigma2_crash_1332740676.log   16.98KB   2 downloads
•  enigma2_crash_1332741307.log   16.98KB   2 downloads
•  enigma2_crash_1332741938.log   16.98KB   5 downloads

[Trial]

Hi,
I would say that AutoTimeShift is failing. Deactivate or delete it.

ciao

[benl]

same problem with et9x00
19 feb image is ok.
later is autoreboot elke 5 minuten (in 1e instantie lijkt alles goed te werken)
ik heb op stick een werkende image van 19 feb staan: terug naar die image is alles weer ok.
zie een verschil als ik de nieuwe image draai: meer icoontjes op de frontpanel die werken

Is een week geleden begonnen met vreemde dingen. na bepaalde tijd freeze van beeld maar geluid draait door. zender verwisselen haalt niks uit: menuknop laat goed menu zien en escape geeft weer een paar minuten beeld.

deinstalled diverse plugins zoals fritzbox en hdmi resolution changer maar dat deed niks.

kan iemand zien wat er mis is?

=== translation ===

Later versions reboot every 5 minutes, at first everything looks ok.
I have a working image on a stick dated feb. 19th. back to that image and everything is ok again.
I see a difference when I run the new image: more working icons on the frontpanel.

It started a week ago with strange things: after a while the image froze but sound continued, this couldn't be fixed by zapping, when pressing the menu button I can go to the menu after which I have an image again for a few minutes.

Removed several plugins, but that didn't make a difference

Attached Files

•  enigma2_crash_1333119562.log   15.59KB   4 downloads

Edited by WanWizard, 30 March 2012 - 22:28.
: translated to English, this is an English forum

[littlesat]

Timeout!
VIDEO_GET_EVENT - ok
[AutoRes] got event evFramerateChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoSizeChanged
VIDEO_GET_EVENT - ok
[AutoRes] got event evVideoProgressiveChanged
[AutoRes] determineContent
[AutoRes] switch deinterlacer mode to auto
[AutoRes] new content is 1920x1080i25
[AutoRes] determined videomode 1080i
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 16:58:49
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[EPGC] nownext finished(1333119538)
TypeError: main() takes exactly 1 argument (0 given)
(PyObject_CallObject(<function main at 0x14ec230>,()) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>

Installeren van de nieuwere Webbrouwser 1.5.2 is hier de oplossing....

[benl]

heb nog veel meer geprobeerd.
alles gaat in de februari image goed, totdat ik de webbrowser update. Gedaan door eerst via applicaties te verwijderen en dan weer toe te voegen.
wilde eens schoon werken dus:
nieuwe image geplaatst, zonder webbrowser: alles goed
webbrowser en weblinks erbij: problemen, maar weinig
satlijsten erin, connecties gemaakt en per item wordt alles steeds instabieler.
als ik de dingen wil die ik normaal doe dan crashed de box om de 30-60 secondes.
wat?
1. media center
2. cccamd 2.3
3. cif connecties met 1 server
4. backup center
dacht niet dat dat associaal veel is.
ben al uren bezig, heb besloten weer terug te gaan naar oude image en het voor vanavond zo te laten.
Moet nog wat aan die nieuwe image geprogrammeerd worden denk ik zo, ik zal echt niet de enige zijn(gebeld met kennissen die hetzelfde hebben)
vermoed dat zo'n 8 werkdagen geleden er ergens een probleem in de software is gekomen.

=== translation ===

I tried more.

Everything works in the february image, until I update the webbrowser. I've done this by first removing it via applications and then adding it again.

I then wanted to work "clean", so I:
installed a new image, without webbrowser. everything ok
installed webbrowser and weblinks: some problems, but not a lot
loaded sat lists, everything is becoming more instable
when I do the things I normally do, the box crashes every 30-60 seconds.
what?
1. media center
2. cccamd 2.3
3. cifs connections with 1 server
4. backup center
not an awful lot I think.

I've been busy for hours, and have decided to go back to the old image and leave it at that for tonight.

Something still needs to be fixed in the new image I guess, I am sure I'm not the only one (called some acquaintances that have the same issue).

I have a feeling the issue got into the image around 8 working days ago.

Edited by WanWizard, 30 March 2012 - 22:33.
: translated into English - This is an English forum

[mirecek1965]

Stick with english lang please, i want to learn something, but dont understand :-(

[littlesat]

Xqq.... install the webbrouwser 1.5.2 is the solution here

[pieterg]

weird, because benl writes he uninstalled an then re-installed the webbrowser from the feed.
We have 1.5.2 in the feed, as far as I can see, so he should have had 1.5.2

[Carl]

You need 1.5.3 which will be tomorrow in the feed.

[benl]

ok, i wait until tomorrow.
strange, addon info from me:
(when i say placed, i mean downloaded through official download applications(green button) and unattended install)
placed image from 23/3 some days ago. all things good
placed bouquets, scanned all transponders, all things good
placed cccam, backupsuite: all things good
made backup on usb stick
placed weblinks, dutch version. I see webbrowser 1.5.2 installing as second, all things installed without error.
waited 5 minutes: all things good
turned off box, complete shutdown
waited 2 minutes, turn box on, booting ok, seeïng normal television broadcast
after 4 minutes: crash and making log
repeating every 5 minutes, after 10x repeating every 3 minutes.
restoring last backup from usb(new image without weblinks): all things good
My conclusion: think it is the webbrowser, starting up in the background and triggering a crash.
uploading new crashlog with this message. Hopefully the update webbrowser 1.5.3 helps, waiting till tomorrow.
No complaint, hopefully this helps programmers to improve the nice pli images we use for years.

Attached Files

•  enigma2_crash_1333139672.log   12.76KB   4 downloads

[littlesat]

Another strange thing... This is VU related... and webbrouwser is only for ET boxes.... ????

[benl]

Xqq.... install the webbrouwser 1.5.2 is the solution here

just updated, webbrowser 1.5.3 is the thing that solved all, not 1.5.2
just this night 1.5.3r0 was released.
upgrades from old versions to today solves also.

[littlesat]

Sorry.... I made a mistake.... It is now 1.5.3

[benl]

thought crashes were simular, posted here for comparison.
stated to be et9x00 after all, so indeed not vu
vu duo from me does not have the problem, because it hasn't got the weblinks, therefor no webbrowser was installed by me.

tnx for all posts, problem solved.