CCcam Crash after Standby (latest openPLI)...
rotarum 27 Mar 2012
hi,
i have installed latest openPLI on my ET-9200 and install softcam CCcam 2.3.0.
After some hours Standby, the softcam is crashing and i have to restart CCcam every day
What can be the problem ??
i have installed latest openPLI on my ET-9200 and install softcam CCcam 2.3.0.
After some hours Standby, the softcam is crashing and i have to restart CCcam every day
What can be the problem ??
erice 27 Mar 2012
hello
i have the same problem with et9000 and latest pli. when i zap to another channel (encrypted) cccam 2.3.0 also often crashes.
mfg
erich
i have the same problem with et9000 and latest pli. when i zap to another channel (encrypted) cccam 2.3.0 also often crashes.
mfg
erich
PaphosAL 27 Mar 2012
I don't know if this is possible in your OpenPLi image version, but in E1 OpenPLi for DM500S, I use a couple of files in /var/etc that stops CCcam when the box enters Standby mode, and starts CCcam when the box is woken up. Both files need to be chmod 755 permissions, or this will not work.
/var/etc/enigma_enter_standby.sh
this contains one single line only:
killall -9 CCcam
and
/var/etc/enigma_leave_standby.sh
again, one single line:
CCcam
I know this isn't addressing your underlying problem, but it seems daft to have a softcam working away when the box is asleep. Plus, when the box is woken up, the cam starts afresh. Might be worth a try, to see if the same routine works in your image version.
Cheers- AL
/var/etc/enigma_enter_standby.sh
this contains one single line only:
killall -9 CCcam
and
/var/etc/enigma_leave_standby.sh
again, one single line:
CCcam
I know this isn't addressing your underlying problem, but it seems daft to have a softcam working away when the box is asleep. Plus, when the box is woken up, the cam starts afresh. Might be worth a try, to see if the same routine works in your image version.
Cheers- AL
rotarum 27 Mar 2012
Downgrade to 2.1.4 seems to fix it but then i have no ecm-time (nan)
Is there CCcam 2.3.0 bug with latest openPLI ???
Is there CCcam 2.3.0 bug with latest openPLI ???
rotarum 28 Mar 2012
Start via telnet
CCcam -d
And See The log
i start CCcam 2.3.0 with debug and it shows everything normal BUT here is the DMESG of the openPLI Image when CCcam crashes:
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
prune_queue: c=7d7b2782
prune_queue: c=7d7ba6a9
prune_queue: c=7d7bc7d0
prune_queue: c=7d7bec2c
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
... i think here is the problem dear developers
rotarum 1 Apr 2012
updated the xtrend today but cccam 2.3.0 still crashing with latest openPLI build
kim1406 2 Apr 2012
On Vu+ Uno, cccam 2.3 is working fine on Pli beta dated 29 March 2012.
I noticed that after I enabled airplayer, cccam stops, I have to enable cccam again.
rotarum 4 Apr 2012
So the issue is more airplayer related?
i have uninstalled PLI softcam panel completely and replaced it with Glass sysutils softcam setup !!!
with Glassutils cccam 2.3.0 is working fine and yes i have airplayer installed too !
maybe it has something to do with PLI softcam-panel and the installed plugins ...
rotarum 4 Apr 2012
On Vu+ Uno, cccam 2.3 is working fine on Pli beta dated 29 March 2012.
on VU+ or Dreambox there is no crashing, the problem is on Xtrend ET9x00 not other boxes !!!
lasa 15 Apr 2012
I have a VU+ Uno and when airplayer is installed CCcam will stop descrambling (other) channels after a few minutes. CCcam is still running though, and it will still descramble the last channel it was on, but no others.
Roodkapke 15 Apr 2012
Airplayer should be fixed, so use it only is you can't do without.
Airplayer and CCcam don't work together.
Airplayer and CCcam don't work together.
SplatterX 26 May 2012
Here is the new version:
enigma2-plugin-extensions-airplayer_0.2.0_mipsel-oe16.ipk 409.23KB 2 downloads
Edited by SplatterX, 26 May 2012 - 09:45.
enigma2-plugin-extensions-airplayer_0.2.0_mipsel-oe16.ipk 409.23KB 2 downloads
Edited by SplatterX, 26 May 2012 - 09:45.