36 replies to this topic

[pieterg]

those udev rules only work on a linux pc (or device) which uses udev.
We are using mdev in openpli.
You can do similar things with mdev, but you'd have to write a custom script (I don't have a ready made example which you can use)

[boutchous]

Aie , i'm not an expert with script linux
But in your img openpli you have udev : /etc/udev/rules.d/99-fuse.rules it's not use ?
If someone can help me one small script i'm very happy

[boutchous]

restarting reader argolis
2012/06/07 20:25:27 51DC10 h creating thread for device Serial:00000010
2012/06/07 20:25:27 562CB0 r Libusb init error : -99
2012/06/07 20:25:27 562CB0 r Cannot open device: Serial 00000010

Can someone tell me what's error -99 ?

Thanks

[boutchous]

I can confirm now that the problem is good in the version 3.0 and not in the version 2.2
The version 2.2 looks automatically /etc/ttyUSB0,1 and 2
Later it is enough to put its config in oscam and everything works impeccably
Example :

[reader]
label = smargo3-srg
protocol = mouse
device = /dev/ttyUSB2
smargopatch = 1
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
ident = 0500:040810,040820,040830
group = 1
emmcache = 1,3,2

But after 2 days i can confirm it's impossible have ttyUSB with 3.0 ( with triple-reader argolis )

Ps : the rules 31-triplereader.rules is not necessary , just install the drivers com2usb

Attached Files

•  oscam-triple-reader2.jpeg   15.97KB   74 downloads

[pieterg]

with 3.0 you mean openpli-3.0?

If so, you might want to try a clean flash.
We've started a clean build yesterday, which should (amongst other things) fix the autoloading of the ftdi_sio driver

[boutchous]

Yes , i mean openpli-3.0
For a new test with openpli-3.0 i wait a little , 3 days with my problem is enough

[boutchous]

I try a new installation today with last openpli-3.0 , but there is always exactly same problem
Any /dev/ttyUSB are create and the triple reader smargo can't be use
The driver usbtoserial is installed , the libusb too
I can confirm on the version 2.2 it's working like a charm and the triple reader is a very good smartreader

[pieterg]

I try a new installation today with last openpli-3.0 , but there is always exactly same problem
Any /dev/ttyUSB are create and the triple reader smargo can't be use

weird, so the /dev/ttyUSB nodes are created, but you cannot use them?
Any error messages, which might indicate what goes wrong?

The driver usbtoserial is installed , the libusb too
I can confirm on the version 2.2 it's working like a charm and the triple reader is a very good smartreader

What do you mean with 'version 2.2'?

[boutchous]

No , i see no error , just /dev/ttyUSB0 to /dev/ttyUSB2 are missing and i can't use the argolis
I'm sorry for mistake : it's not version 2.2 but 2.1 ; i give you as info when i configure exactly the same but on Openpli beta 2.1 on VU+Uno it's working like a charm ; this problem is only with OpenPLI 3.0
Sorry for bad english , i hope you understand

[pieterg]

does ftdi_sio autoload, after you've installed it? (check with lsmod)

[boutchous]

New test today ,but always same problem

vuuno login: root
Password:
root@vuuno:~# lsmod
Module Size Used by
zd1211rw 55901 0
rtl8187 54063 0
rt73usb 24424 0
rt2800usb 13089 0
rt2800lib 44771 1 rt2800usb
rt2500usb 18185 0
rt2x00usb 10921 3 rt73usb,rt2800usb,rt2500usb
rt2x00lib 40538 5 rt73usb,rt2800usb,rt2800lib,rt2500usb,rt2x00usb
r8712u 169530 0
8192cu 542901 0
pl2303 12486 0
keyspan 32756 0
ipv6 342438 10
ftdi_sio 30425 0
carl9170 83694 0
belkin_sa 6809 0
usbserial 30919 4 pl2303,keyspan,ftdi_sio,belkin_sa
ath9k_htc 63975 0
mac80211 211445 7 zd1211rw,rtl8187,rt2800lib,rt2x00usb,rt2x00lib,carl9170,ath9k_htc
ath9k_common 1442 1 ath9k_htc
ath9k_hw 310668 2 ath9k_htc,ath9k_common
ath 16979 3 carl9170,ath9k_htc,ath9k_hw
fpga_directc 57585 0
brcmfb 1127 2
dvb_bcm7413 5038133 31 fpga_directc,brcmfb
procmk 1397 2 fpga_directc,dvb_bcm7413
root@vuuno:~#

no ttyUSB are created

[pieterg]

no ttyUSB are created

And what does dmesg say, when you plug the device?

[boutchous]

Héhéhé , now it's working too with OpenPLI 3.0
I have switch on and off 2 times with Argolis without cards , and now i have my ttyUSB , and no more problem when i reboot
Thanks for help Pieterg

Attached Files

•  ttyUSB.jpeg   23.97KB   88 downloads
•  ttyUSB2.jpeg   21.02KB   72 downloads

[misinick]

my dreambox 500hd original image release-dm500hd-3.2.3.nfi & gp3-0.53-r3 !!
my cccam verzion 2.1.4 !
############################################################ ##########
WEBINFO USERNAME : xxxx
WEBINFO PASSWORD : xxxx
WEBINFO LISTEN PORT : 16xxx
DISABLE EMM : yes
############################################################ #####
SERIAL READER : /dev/ttyUSB0 smartreader+
SERIAL READER : /dev/ttyUSB1 smartreader+
SERIAL READER : /dev/ttyUSB2 smartreader+
############################################################ #####
Serial number: 00000010
Readername: triplereader_TEST

The new names for the triplereader with serial number 00000010 will be:
P1 = /dev/triplereader_0D02_upc direct
P2 = /dev/triplereader_0D02_upc direct
P3 = /dev/triplereader_0D02_upc direct
Serial number: 00000010
Readername: my_READER
############################################################ #####
card reader /dev/ttyUSB0
no or unknown card inserted

card reader /dev/ttyUSB1
handled 20(0) ecms and 0(0) emms
Cryptoworks card bios rev 5
Caid d02 0x8C UPC2
Cardserial 10xc0xdb12
id chid stat date version name
8c 0001 88 05.11.05-04.12.05 00000000 Test HUMOR1


card reader /dev/ttyUSB2
no or unknown card inserted
############################################################ #####
my problem no picture..no ecm send...! why problem??? my card active!!

[gorski]

Original card? Remove the serial number...

Why did you kill EMMs?

Tried newer CCcam?

Try OSCam!

[misinick]

cccam verzion 2.3.0 does not share my picture...anyway good at all the options ..??

Edited by misinick, 11 September 2012 - 05:51.

[aztek12]

Hi all,
I have tried some configurations with linux distributions (ubuntu and centos) with oscam.
Oscam was configured with a very cheap pcsc smartcard reader and I had optimal results (about 100ms of ECM).
My old pcsc smartcard reader is dead and the reseller suggest me to improve performance using a dedicate device like the smartreader+.
This is the beginning of a lot of problems !
The utilities that are used in smartreader+ are unusable in triple reader and I can't configure correctly the device.
With smartreader protocol, the device is not recognized.
With serial protocol, ATR is truncated, so the card isn't recognized correctly.
With smargo protocol, it works but ECM are unacceptable (about 265ms).
How can improve ECM time of about 100-120ms obtained with a very cheap pcsc smartcard reader?

This is my oscam.server configuration:

[reader]
label = smargo-0
protocol = smargo
device = /dev/ttyUSB0
device_out_endpoint = 0x81
smargopatch = 1
boxid = xxxxxx
detect = cd
mhz = 600
cardmhz = 357

thanks in advance