5 replies to this topic

[loupasmi]

Hello. i am an owner of a dm 7025 yesterday i make an update of openpli after the reboot my machine loads the bar on the lcd screen after a while it stops and lcd is blanks in the screen the onlythink that i can see is the boot logo with the gears.
I tried to reinstall the open pli to and the official operation system (and over ethernet and over serial) many times but after every try the same think again.
Only the blank lcd and boot logo with the gears.
Can any one please give me some help?

[JanH]

Try to reinstall secondstage file. I have similar problem if image too big for 7025+.
Only way was sent new secondstage nfi file to box with DreamUp and serial link and than image nfi file.
DreamUp use own boot file, image upload possible but box will crash again.

[loupasmi]

Thanks for your reply.
Can you please explain me what is the secondstage file?Im just downloading the last openpli suitable for 7025.Is that the same?
I tried to put the official firmware with the serial link and DreamUp but again the result was the same.

[JanH]

Looks like that bootloader remain demaged any time if flash full. It could happen after some plugins install or big image upload or for example many entry in timer. It is a bit different for 7025 and 7025+. I have never change bootloader on 7025 for fault doas not metter if flash full.
Flash is very small. I can recomend PLI image for 7025 with flash expand include. Other way my box crashed many time.
Now I can install all plugins and skins for fun.
I tryed upload original image as well but without bootloader repair it did not work at all.
Secondstage file version must correspond with image or you obtain fault message.

[loupasmi]

I have no plugin install im trying to put a version of pli that i used to use and steel im not able to make the dm open.

[JanH]

Install bootloader first before image installing.

http:/ /www.luxsat.eu...x/index7025.htm
http:/ /upek.sputnik-...nt.php?id=15272

Edited by JanH, 2 May 2012 - 14:31.