I have updated pli but after mgcamd installed crash om timer record and others
crash after install mgcamd
Started by markfs, 08 Jun 2012 12:21
9 replies to this topic
Re: crash after install mgcamd #2
-
- Member
- 7 posts
0
Neutral
Posted 9 June 2012 - 01:07
<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
<crashdate>Fri Jun 8 19:05:01 2012</crashdate>
<compiledate>May 21 2012</compiledate>
<contactemail>forum at www.openpli.org</contactemail>
<!-- Please email this crashlog to above address -->
<skin>Magic/skin.xml</skin>
<sourcedate>May 21 2012</sourcedate>
<branch>(no branch)</branch>
<rev></rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>dm7025</stbmodel>
<kernelversion>
<![CDATA[
Linux dm7025 2.6.12.6 #1 Thu Dec 8 02:11:57 CET 2011 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>console=null root=/dev/mtdblock2 rootfstype=jffs2 ro</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<![CDATA[
OpenEmbedded Linux %h
openpli 2.1 %h
]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
C 3 orbpos 1560 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2088 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:55F1:16:1000:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0604... so use it
(1)CISlot 0, usecount now 1
eDVBCIInterfaces->setInputSource(0, 4)
CI Slot 0 setSource(0)
[eDVBCIInterfaces] gotPMT
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1866438 running
[eEPGCache] channel 0x1866438 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (03f3), and 1 audio stream(s) (03f4), and the pcr pid is 03f3, and the text pid is 03f8
allocate demux
decoder state: play, vpid=1011, apid=1012
DMX_SET_PES_FILTER(0x3f3) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x3f4) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x3f3) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x3f8) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[EPGC] next update in 2 sec
VIDEO_GET_EVENT - ok
PATready
use pmtpid 03fb for service_id 55f1
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (03f3), and 1 audio stream(s) (03f4), and the pcr pid is 03f3, and the text pid is 03f8
decoder state: play, vpid=1011, apid=1012
[eDVBCAService] new service 1:0:1:55F1:16:1000:6180000:0:0:0:
[eDVBCAService] add demux 2 to slot 0 service 1:0:1:55F1:16:1000:6180000:0:0:0:
[eDVBCAService] add demux 0 to slot 1 service 1:0:1:55F1:16:1000:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0604... so use it
[eDVBCIInterfaces] gotPMT
demux 2 mask 05 prevhash 0
action -> InfobarChannelSelection historyBack
playing 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCAService] free slot 0 demux 2 for service 1:0:1:55F1:16:1000:6180000:0:0:0:
[eDVBCAService] free slot 1 demux 0 for service 1:0:1:55F1:16:1000:6180000:0:0:0:
[eDVBCAService] free service 1:0:1:55F1:16:1000:6180000:0:0:0:
[eDVBCIInterfaces] remove last pmt handler for service 1:0:1:55F1:16:1000:6180000:0:0:0: send empty capmt
eDVBCIInterfaces->setInputSource(0, 0)
(3) slot 0 usecount is now 0
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1866438
[eEPGCache] remove channel 0x1866438
allocate channel.. 0020:1000
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12135500 Pol 1 SR 27800000 INV 2 FEC 3 orbpos 1560 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1535 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:7D0C:20:1000:6180000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 1
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1866438 running
[eEPGCache] channel 0x1866438 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0461), and 1 audio stream(s) (0462), and the pcr pid is 0461, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=1121, apid=1122
DMX_SET_PES_FILTER(0x461) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x462) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x461) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[EPGC] next update in 38 min
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0469 for service_id 7d0c
eventNewProgramInfo 0 0
have 1 video stream(s) (0461), and 1 audio stream(s) (0462), and the pcr pid is 0461, and the text pid is ffffffff
decoder state: play, vpid=1121, apid=1122
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCAService] new service 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCAService] add demux 2 to slot 0 service 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCAService] add demux 0 to slot 1 service 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 2 mask 05 prevhash 0
[SEC] set dynamic current limiting
action -> InfobarChannelSelection historyBack
playing 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCAService] free slot 0 demux 2 for service 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCAService] free slot 1 demux 0 for service 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCAService] free service 1:0:1:7D0C:20:1000:6180000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1866438
[eEPGCache] remove channel 0x1866438
allocate channel.. 0001:1000
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12558000 Pol 0 SR 27800000 INV 2 FEC 3 orbpos 1560 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1958 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3EC:1:1000:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0604... so use it
(1)CISlot 0, usecount now 1
eDVBCIInterfaces->setInputSource(0, 4)
CI Slot 0 setSource(0)
[eDVBCIInterfaces] gotPMT
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1866438 running
[eEPGCache] channel 0x1866438 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0411), and 1 audio stream(s) (0412), and the pcr pid is 0411, and the text pid is 0416
allocate demux
decoder state: play, vpid=1041, apid=1042
DMX_SET_PES_FILTER(0x411) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x412) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x411) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x416) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[EPGC] next update in 2 sec
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0419 for service_id 03ec
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (0411), and 1 audio stream(s) (0412), and the pcr pid is 0411, and the text pid is 0416
decoder state: play, vpid=1041, apid=1042
[eDVBCAService] new service 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCAService] add demux 2 to slot 0 service 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCAService] add demux 0 to slot 1 service 1:0:1:3EC:1:1000:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0604... so use it
[eDVBCIInterfaces] gotPMT
demux 2 mask 05 prevhash 0
sdt update done!
[EPGC] start caching events(1339153415)
action -> InfobarChannelSelection historyBack
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 19:03:38
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
action -> InfobarChannelSelection historyBack
action -> InfobarChannelSelection historyBack
action -> InfobarChannelSelection historyBack
action -> InfobarChannelSelection switchChannelDown
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1339153424)
[EPGC] stop caching events(1339153424)
[EPGC] next update in 60 min
action -> ChannelSelectBaseActions showFavourites
action -> OkCancelActions ok
action -> OkCancelActions ok
playing 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCAService] free slot 0 demux 2 for service 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCAService] free slot 1 demux 0 for service 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCAService] free service 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCIInterfaces] remove last pmt handler for service 1:0:1:3EC:1:1000:6180000:0:0:0: send empty capmt
eDVBCIInterfaces->setInputSource(0, 0)
(3) slot 0 usecount is now 0
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1866438
[eEPGCache] remove channel 0x1866438
allocate channel.. 0006:0069
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12527000 Pol 1 SR 30000000 INV 2 FEC 3 orbpos 1560 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1927 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:263:6:69:6180000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 1
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 7, inversion off, m_tuning 2
(0)fe event: status 3, inversion off, m_tuning 3
(0)fe event: status 1f, inversion off, m_tuning 4
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1866438 running
[eEPGCache] channel 0x1866438 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0410), and 1 audio stream(s) (0411), and the pcr pid is 0410, and the text pid is 0412
allocate demux
decoder state: play, vpid=1040, apid=1041
DMX_SET_PES_FILTER(0x410) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x411) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x410) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x412) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[EPGC] next update in 39 min
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0020 for service_id 0263
[SEC] set dynamic current limiting
VIDEO_GET_EVENT - ok
eventNewProgramInfo 0 0
have 1 video stream(s) (0410), and 1 audio stream(s) (0411), and the pcr pid is 0410, and the text pid is 0412
decoder state: play, vpid=1040, apid=1041
[eDVBCAService] new service 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCAService] add demux 2 to slot 0 service 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCAService] add demux 0 to slot 1 service 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 2 mask 05 prevhash 0
sdt update done!
action -> InfobarShowHideActions toggleShow
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 19:04:06
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
action -> OkCancelActions ok
okbuttonClick
ParentalControlSetup ParentalControlSetup
action -> OkCancelActions ok
okbuttonClick
building menu entries
action -> WizardActions down
unknown action WizardActions/down! typo in keymap?
action -> WizardActions ok
executing opkg --add-dest /media/hdd:/media/hdd update
[SKIN] Parsing embedded skin <embedded-in-'UpdatePlugin'>
main thread is non-idle! display spinner!
data: Collected errors:
* opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: No space left on device.
child has terminated
pipes closed
executing opkg --add-dest /media/hdd:/media/hdd list-upgradable
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
data: Collected errors:
* opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: No space left on device.
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
action -> WizardActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> WizardActions ok
executing opkg --add-dest /media/hdd:/media/hdd upgrade
data: Collected errors:
* opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: No space left on device.
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
action -> WizardActions ok
action -> WizardActions ok
executing opkg --add-dest /media/hdd:/media/hdd update
[SKIN] Parsing embedded skin <embedded-in-'UpdatePlugin'>
main thread is non-idle! display spinner!
data: Collected errors:
* opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: No space left on device.
child has terminated
pipes closed
executing opkg --add-dest /media/hdd:/media/hdd list-upgradable
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
data: Collected errors:
* opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: No space left on device.
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
action -> WizardActions ok
[eDVBCAService] free slot 0 demux 2 for service 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCAService] free slot 1 demux 0 for service 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCAService] free service 1:0:1:263:6:69:6180000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[SKIN] Parsing embedded skin <embedded-in-'QuitMainloopScreen'>
[SKIN] Parsing embedded skin <embedded-in-'TryQuitMainloop'>
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 592, in <module>
runScreenTest()
File "/usr/lib/enigma2/python/mytest.py", line 532, in runScreenTest
session.nav.shutdown()
File "/usr/lib/enigma2/python/Navigation.py", line 129, in shutdown
File "/usr/lib/enigma2/python/RecordTimer.py", line 804, in shutdown
File "/usr/lib/enigma2/python/RecordTimer.py", line 656, in saveTimer
IOError: [Errno 28] No space left on device: '/etc/enigma2/timers.xml.writing'
------------------------------------------------------------
(exit code 5)
main thread is non-idle! display spinner!
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
<openpli>
<enigma2>
<crashdate>Fri Jun 8 19:05:01 2012</crashdate>
<compiledate>May 21 2012</compiledate>
<contactemail>forum at www.openpli.org</contactemail>
<!-- Please email this crashlog to above address -->
<skin>Magic/skin.xml</skin>
<sourcedate>May 21 2012</sourcedate>
<branch>(no branch)</branch>
<rev></rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>dm7025</stbmodel>
<kernelversion>
<![CDATA[
Linux dm7025 2.6.12.6 #1 Thu Dec 8 02:11:57 CET 2011 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>console=null root=/dev/mtdblock2 rootfstype=jffs2 ro</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<![CDATA[
OpenEmbedded Linux %h
openpli 2.1 %h
]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
C 3 orbpos 1560 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2088 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:55F1:16:1000:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0604... so use it
(1)CISlot 0, usecount now 1
eDVBCIInterfaces->setInputSource(0, 4)
CI Slot 0 setSource(0)
[eDVBCIInterfaces] gotPMT
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1866438 running
[eEPGCache] channel 0x1866438 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (03f3), and 1 audio stream(s) (03f4), and the pcr pid is 03f3, and the text pid is 03f8
allocate demux
decoder state: play, vpid=1011, apid=1012
DMX_SET_PES_FILTER(0x3f3) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x3f4) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x3f3) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x3f8) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[EPGC] next update in 2 sec
VIDEO_GET_EVENT - ok
PATready
use pmtpid 03fb for service_id 55f1
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (03f3), and 1 audio stream(s) (03f4), and the pcr pid is 03f3, and the text pid is 03f8
decoder state: play, vpid=1011, apid=1012
[eDVBCAService] new service 1:0:1:55F1:16:1000:6180000:0:0:0:
[eDVBCAService] add demux 2 to slot 0 service 1:0:1:55F1:16:1000:6180000:0:0:0:
[eDVBCAService] add demux 0 to slot 1 service 1:0:1:55F1:16:1000:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0604... so use it
[eDVBCIInterfaces] gotPMT
demux 2 mask 05 prevhash 0
action -> InfobarChannelSelection historyBack
playing 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCAService] free slot 0 demux 2 for service 1:0:1:55F1:16:1000:6180000:0:0:0:
[eDVBCAService] free slot 1 demux 0 for service 1:0:1:55F1:16:1000:6180000:0:0:0:
[eDVBCAService] free service 1:0:1:55F1:16:1000:6180000:0:0:0:
[eDVBCIInterfaces] remove last pmt handler for service 1:0:1:55F1:16:1000:6180000:0:0:0: send empty capmt
eDVBCIInterfaces->setInputSource(0, 0)
(3) slot 0 usecount is now 0
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1866438
[eEPGCache] remove channel 0x1866438
allocate channel.. 0020:1000
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12135500 Pol 1 SR 27800000 INV 2 FEC 3 orbpos 1560 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1535 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:7D0C:20:1000:6180000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 1
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1866438 running
[eEPGCache] channel 0x1866438 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0461), and 1 audio stream(s) (0462), and the pcr pid is 0461, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=1121, apid=1122
DMX_SET_PES_FILTER(0x461) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x462) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x461) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[EPGC] next update in 38 min
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0469 for service_id 7d0c
eventNewProgramInfo 0 0
have 1 video stream(s) (0461), and 1 audio stream(s) (0462), and the pcr pid is 0461, and the text pid is ffffffff
decoder state: play, vpid=1121, apid=1122
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCAService] new service 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCAService] add demux 2 to slot 0 service 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCAService] add demux 0 to slot 1 service 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 2 mask 05 prevhash 0
[SEC] set dynamic current limiting
action -> InfobarChannelSelection historyBack
playing 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCAService] free slot 0 demux 2 for service 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCAService] free slot 1 demux 0 for service 1:0:1:7D0C:20:1000:6180000:0:0:0:
[eDVBCAService] free service 1:0:1:7D0C:20:1000:6180000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1866438
[eEPGCache] remove channel 0x1866438
allocate channel.. 0001:1000
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12558000 Pol 0 SR 27800000 INV 2 FEC 3 orbpos 1560 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1958 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:3EC:1:1000:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0604... so use it
(1)CISlot 0, usecount now 1
eDVBCIInterfaces->setInputSource(0, 4)
CI Slot 0 setSource(0)
[eDVBCIInterfaces] gotPMT
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 2
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1866438 running
[eEPGCache] channel 0x1866438 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0411), and 1 audio stream(s) (0412), and the pcr pid is 0411, and the text pid is 0416
allocate demux
decoder state: play, vpid=1041, apid=1042
DMX_SET_PES_FILTER(0x411) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x412) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x411) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x416) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[EPGC] next update in 2 sec
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0419 for service_id 03ec
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (0411), and 1 audio stream(s) (0412), and the pcr pid is 0411, and the text pid is 0416
decoder state: play, vpid=1041, apid=1042
[eDVBCAService] new service 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCAService] add demux 2 to slot 0 service 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCAService] add demux 0 to slot 1 service 1:0:1:3EC:1:1000:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0604... so use it
[eDVBCIInterfaces] gotPMT
demux 2 mask 05 prevhash 0
sdt update done!
[EPGC] start caching events(1339153415)
action -> InfobarChannelSelection historyBack
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 19:03:38
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
action -> InfobarChannelSelection historyBack
action -> InfobarChannelSelection historyBack
action -> InfobarChannelSelection historyBack
action -> InfobarChannelSelection switchChannelDown
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] nownext finished(1339153424)
[EPGC] stop caching events(1339153424)
[EPGC] next update in 60 min
action -> ChannelSelectBaseActions showFavourites
action -> OkCancelActions ok
action -> OkCancelActions ok
playing 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCAService] free slot 0 demux 2 for service 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCAService] free slot 1 demux 0 for service 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCAService] free service 1:0:1:3EC:1:1000:6180000:0:0:0:
[eDVBCIInterfaces] remove last pmt handler for service 1:0:1:3EC:1:1000:6180000:0:0:0: send empty capmt
eDVBCIInterfaces->setInputSource(0, 0)
(3) slot 0 usecount is now 0
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1866438
[eEPGCache] remove channel 0x1866438
allocate channel.. 0006:0069
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12527000 Pol 1 SR 30000000 INV 2 FEC 3 orbpos 1560 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1927 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:263:6:69:6180000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
[SEC] setVoltage 1
[SEC] sleep 10ms
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 7, inversion off, m_tuning 2
(0)fe event: status 3, inversion off, m_tuning 3
(0)fe event: status 1f, inversion off, m_tuning 4
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1866438 running
[eEPGCache] channel 0x1866438 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0410), and 1 audio stream(s) (0411), and the pcr pid is 0410, and the text pid is 0412
allocate demux
decoder state: play, vpid=1040, apid=1041
DMX_SET_PES_FILTER(0x410) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x411) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x410) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x412) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[EPGC] next update in 39 min
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0020 for service_id 0263
[SEC] set dynamic current limiting
VIDEO_GET_EVENT - ok
eventNewProgramInfo 0 0
have 1 video stream(s) (0410), and 1 audio stream(s) (0411), and the pcr pid is 0410, and the text pid is 0412
decoder state: play, vpid=1040, apid=1041
[eDVBCAService] new service 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCAService] add demux 2 to slot 0 service 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCAService] add demux 0 to slot 1 service 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCIInterfaces] gotPMT
demux 2 mask 05 prevhash 0
sdt update done!
action -> InfobarShowHideActions toggleShow
action -> InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 19:04:06
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
action -> OkCancelActions ok
okbuttonClick
ParentalControlSetup ParentalControlSetup
action -> OkCancelActions ok
okbuttonClick
building menu entries
action -> WizardActions down
unknown action WizardActions/down! typo in keymap?
action -> WizardActions ok
executing opkg --add-dest /media/hdd:/media/hdd update
[SKIN] Parsing embedded skin <embedded-in-'UpdatePlugin'>
main thread is non-idle! display spinner!
data: Collected errors:
* opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: No space left on device.
child has terminated
pipes closed
executing opkg --add-dest /media/hdd:/media/hdd list-upgradable
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
data: Collected errors:
* opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: No space left on device.
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
action -> WizardActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> WizardActions ok
executing opkg --add-dest /media/hdd:/media/hdd upgrade
data: Collected errors:
* opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: No space left on device.
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
action -> WizardActions ok
action -> WizardActions ok
executing opkg --add-dest /media/hdd:/media/hdd update
[SKIN] Parsing embedded skin <embedded-in-'UpdatePlugin'>
main thread is non-idle! display spinner!
data: Collected errors:
* opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: No space left on device.
child has terminated
pipes closed
executing opkg --add-dest /media/hdd:/media/hdd list-upgradable
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
data: Collected errors:
* opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: No space left on device.
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
action -> WizardActions ok
[eDVBCAService] free slot 0 demux 2 for service 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCAService] free slot 1 demux 0 for service 1:0:1:263:6:69:6180000:0:0:0:
[eDVBCAService] free service 1:0:1:263:6:69:6180000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
[SKIN] Parsing embedded skin <embedded-in-'QuitMainloopScreen'>
[SKIN] Parsing embedded skin <embedded-in-'TryQuitMainloop'>
EXCEPTION IN PYTHON STARTUP CODE:
------------------------------------------------------------
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 592, in <module>
runScreenTest()
File "/usr/lib/enigma2/python/mytest.py", line 532, in runScreenTest
session.nav.shutdown()
File "/usr/lib/enigma2/python/Navigation.py", line 129, in shutdown
File "/usr/lib/enigma2/python/RecordTimer.py", line 804, in shutdown
File "/usr/lib/enigma2/python/RecordTimer.py", line 656, in saveTimer
IOError: [Errno 28] No space left on device: '/etc/enigma2/timers.xml.writing'
------------------------------------------------------------
(exit code 5)
main thread is non-idle! display spinner!
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
Re: crash after install mgcamd #3
-
- Senior Member
- 1,596 posts
+49
Good
Posted 9 June 2012 - 02:57
Guessing that, from YOUR log...
... has something to do with it...
--
hemi
opkg_conf_load: Could not create lock file /usr/lib/opkg/lock: No space left on device.
IOError: [Errno 28] No space left on device: '/etc/enigma2/timers.xml.writing'
etc...
... has something to do with it...
--
hemi
Edited by hemispherical1, 9 June 2012 - 02:59.
Re: crash after install mgcamd #4
-
- Member
- 7 posts
0
Neutral
Posted 9 June 2012 - 03:16
Edited by markfs, 9 June 2012 - 03:16.
Re: crash after install mgcamd #5
-
- Member
- 7 posts
0
Neutral
Posted 9 June 2012 - 05:05
made room on hdd still get crash when trying to record
new cras log
new cras log
<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
<crashdate>Sat Jun 9 12:02:10 2012</crashdate>
<compiledate>May 21 2012</compiledate>
<contactemail>forum at [url="http://www.openpli.org</contactemail"]www.openpli.org</contactemail[/url]>
<!-- Please email this crashlog to above address -->
<skin>Magic/skin.xml</skin>
<sourcedate>May 21 2012</sourcedate>
<branch>(no branch)</branch>
<rev></rev>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>dm7025</stbmodel>
<kernelversion>
<![CDATA[
Linux dm7025 2.6.12.6 #1 Thu Dec 8 02:11:57 CET 2011 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>console=null root=/dev/mtdblock2 rootfstype=jffs2 ro</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<!-- No such file or directory -->
</imageversion>
<imageissue>
<![CDATA[
OpenEmbedded Linux %h
openpli 2.1 %h
]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
able.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x191df30
[eEPGCache] remove channel 0x191df30
allocate channel.. 0008:0069
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12728250 Pol 1 SR 24450000 INV 2 FEC 1 orbpos 1560 system 0 modulation 1 pilot 2, rolloff 0
tuning to 2128 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:32A:8:69:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0602... so use it
(1)CISlot 0, usecount now 1
eDVBCIInterfaces->setInputSource(0, 4)
CI Slot 0 setSource(0)
[eDVBCIInterfaces] gotPMT
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x191df30 running
[eEPGCache] channel 0x191df30 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0300), and 1 audio stream(s) (0301), and the pcr pid is 0300, and the text pid is 0302
allocate demux
decoder state: play, vpid=768, apid=769
DMX_SET_PES_FILTER(0x300) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x301) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x300) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x302) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[EPGC] next update in 24 min
[SEC] set dynamic current limiting
child has terminated
pipes closed
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0100 for service_id 032a
poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
eventNewProgramInfo 0 0
have 1 video stream(s) (0300), and 1 audio stream(s) (0301), and the pcr pid is 0300, and the text pid is 0302
decoder state: play, vpid=768, apid=769
[eDVBCAService] new service 1:0:1:32A:8:69:6180000:0:0:0:
[eDVBCAService] add demux 2 to slot 0 service 1:0:1:32A:8:69:6180000:0:0:0:
[eDVBCAService] add demux 0 to slot 1 service 1:0:1:32A:8:69:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0602... so use it
[eDVBCIInterfaces] gotPMT
demux 2 mask 05 prevhash 0
sdt update done!
job Components.Task.Job name=Checking Filesystem... #tasks=4 completed with [] in None
execute: 0 umount -f /media/hdd
child has terminated
pipes closed
execute: 0 fsck.ext3 -f -p /dev/hda1
poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
action -> InfobarChannelSelection zapDown
playing 1:0:1:324:8:69:6180000:0:0:0:
[eDVBCAService] free slot 0 demux 2 for service 1:0:1:32A:8:69:6180000:0:0:0:
[eDVBCAService] free slot 1 demux 0 for service 1:0:1:32A:8:69:6180000:0:0:0:
[eDVBCAService] free service 1:0:1:32A:8:69:6180000:0:0:0:
[eDVBCIInterfaces] remove last pmt handler for service 1:0:1:32A:8:69:6180000:0:0:0: send empty capmt
eDVBCIInterfaces->setInputSource(0, 0)
(3) slot 0 usecount is now 0
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:324:8:69:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0602... so use it
(1)CISlot 0, usecount now 1
eDVBCIInterfaces->setInputSource(0, 4)
CI Slot 0 setSource(0)
[eDVBCIInterfaces] gotPMT
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0310), and 1 audio stream(s) (0311), and the pcr pid is 0310, and the text pid is 0312
allocate demux
decoder state: play, vpid=784, apid=785
DMX_SET_PES_FILTER(0x310) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x311) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x310) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x312) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0101 for service_id 0324
eventNewProgramInfo 0 0
have 1 video stream(s) (0310), and 1 audio stream(s) (0311), and the pcr pid is 0310, and the text pid is 0312
decoder state: play, vpid=784, apid=785
[eDVBCAService] new service 1:0:1:324:8:69:6180000:0:0:0:
[eDVBCAService] add demux 2 to slot 0 service 1:0:1:324:8:69:6180000:0:0:0:
[eDVBCAService] add demux 0 to slot 1 service 1:0:1:324:8:69:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0602... so use it
[eDVBCIInterfaces] gotPMT
demux 2 mask 05 prevhash 0
[eDVBLocalTimerHandler] diff is -2
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 11:44:02
[eDVBLocalTimerHandler] m_time_difference is -2
[eDVBLocalTimerHandler] set Linux Time
action -> InfobarActions showMovies
warning, skin is missing element chosenletter in <class 'Screens.MovieSelection.MovieSelection'>
action -> OkCancelActions cancel
action -> InfobarExtensions extensions
action -> WizardActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> WizardActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> WizardActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> WizardActions ok
warning, skin is missing element key_yellow in <class 'Plugins.Extensions.GraphMultiEPG.GraphMultiEpg.GraphMultiEPG'>
action -> OkCancelActions cancel
action -> InfobarExtensions extensions
action -> WizardActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> WizardActions ok
action -> ColorActions red
action -> InfobarShowHideActions hide
action -> InfobarExtensions extensions
action -> WizardActions back
action -> InfobarChannelSelection switchChannelDown
action -> OkCancelActions ok
playing 1:0:1:133:3:69:6180000:0:0:0:
[eDVBCAService] free slot 0 demux 2 for service 1:0:1:324:8:69:6180000:0:0:0:
[eDVBCAService] free slot 1 demux 0 for service 1:0:1:324:8:69:6180000:0:0:0:
[eDVBCAService] free service 1:0:1:324:8:69:6180000:0:0:0:
[eDVBCIInterfaces] remove last pmt handler for service 1:0:1:324:8:69:6180000:0:0:0: send empty capmt
eDVBCIInterfaces->setInputSource(0, 0)
(3) slot 0 usecount is now 0
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x191df30
[eEPGCache] remove channel 0x191df30
allocate channel.. 0003:0069
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12407000 Pol 1 SR 30000000 INV 2 FEC 0 orbpos 1560 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1807 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:133:3:69:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0602... so use it
(1)CISlot 0, usecount now 1
eDVBCIInterfaces->setInputSource(0, 4)
CI Slot 0 setSource(0)
[eDVBCIInterfaces] gotPMT
allocate demux
[SEC] set static current limiting
[SEC] invalidate current switch params
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x191df30 running
[eEPGCache] channel 0x191df30 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0500), and 1 audio stream(s) (0501), and the pcr pid is 0500, and the text pid is 0502
allocate demux
decoder state: play, vpid=1280, apid=1281
DMX_SET_PES_FILTER(0x500) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x501) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x500) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x502) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
[EPGC] next update in 42 min
VIDEO_GET_EVENT - ok
PATready
use pmtpid 0020 for service_id 0133
eventNewProgramInfo 0 0
have 1 video stream(s) (0500), and 1 audio stream(s) (0501), and the pcr pid is 0500, and the text pid is 0502
decoder state: play, vpid=1280, apid=1281
[eDVBCAService] new service 1:0:1:133:3:69:6180000:0:0:0:
[eDVBCAService] add demux 2 to slot 0 service 1:0:1:133:3:69:6180000:0:0:0:
[eDVBCAService] add demux 0 to slot 1 service 1:0:1:133:3:69:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0602... so use it
[eDVBCIInterfaces] gotPMT
demux 2 mask 05 prevhash 0
[SEC] set dynamic current limiting
sdt update done!
VIDEO_GET_EVENT - ok
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 11:47:00
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
[CrossEPG_Auto] poll
[fsck] /dev/hda1: 355/238464 files (25.4% non-contiguous), 41781719/61032943 blocks
child has terminated
pipes closed
execute: 0 sleep 2; sfdisk -R /dev/hda
poll: unhandled POLLERR/HUP/NVAL for fd 58(16)
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
job Components.Task.Job name=Checking Filesystem... #tasks=4 completed with [] in None
[ePopen] command: ('hdparm', 'hdparm', '-y', '/dev/hda')
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 57(16)
action -> InfobarExtensions extensions
action -> WizardActions back
action -> InfobarActions showMovies
warning, skin is missing element chosenletter in <class 'Screens.MovieSelection.MovieSelection'>
main thread is non-idle! display spinner!
action -> DirectionActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> DirectionActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> DirectionActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> DirectionActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> OkCancelActions ok
action -> DirectionActions down
action -> DirectionActions downUp
unknown action DirectionActions/downUp! typo in keymap?
action -> OkCancelActions ok
action -> OkCancelActions ok
action -> DirectionActions right
unknown action DirectionActions/right! typo in keymap?
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
action -> DirectionActions right
unknown action DirectionActions/right! typo in keymap?
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
action -> DirectionActions right
unknown action DirectionActions/right! typo in keymap?
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
action -> DirectionActions right
unknown action DirectionActions/right! typo in keymap?
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
action -> DirectionActions right
unknown action DirectionActions/right! typo in keymap?
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
action -> DirectionActions right
unknown action DirectionActions/right! typo in keymap?
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
action -> DirectionActions right
unknown action DirectionActions/right! typo in keymap?
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
action -> DirectionActions right
unknown action DirectionActions/right! typo in keymap?
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
action -> DirectionActions right
unknown action DirectionActions/right! typo in keymap?
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
action -> DirectionActions right
unknown action DirectionActions/right! typo in keymap?
action -> DirectionActions rightUp
unknown action DirectionActions/rightUp! typo in keymap?
action -> DirectionActions left
unknown action DirectionActions/left! typo in keymap?
action -> DirectionActions leftUp
unknown action DirectionActions/leftUp! typo in keymap?
action -> DirectionActions left
unknown action DirectionActions/left! typo in keymap?
action -> DirectionActions leftUp
unknown action DirectionActions/leftUp! typo in keymap?
action -> OkCancelActions cancel
action -> InfobarAudioSelectionActions audioSelection
action -> SetupActions cancel
[infobar::audioSelected] 0
action -> InfobarInstantRecord instantRecord
self.recording: []
action -> WizardActions ok
pre:
[]
[TIMER] record time changed, start prepare is now: Sat Jun 9 12:01:48 2012
[Timer] Record RecordTimerEntry(name=Sport Special, begin=Sat Jun 9 12:02:08 2012, serviceref=1:0:1:133:3:69:6180000:0:0:0:, justplay=False)
[TIMER] activating state 1
begin_date: 20120609 1202
service_name: 7 Central
name: Sport Special
description: AAMI Stradbroke Cup
[TIMER] Filename calculated as: '/media/hdd/movie/20120609 1202 - 7 Central - Sport Special'
recording service: <enigma.eServiceReference; proxy of <Swig Object of type 'eServiceReference *' at 0x17db5a0> >
[add callback]
use cached_channel
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:133:3:69:6180000:0:0:0:
The CI in Slot 0 has said it can handle caid 0602... so use it
(2)CISlot 0, usecount now 2
ok ... now we start!!
RECORD service event 5
[TIMER] record event 6
RECORD service event 6
tuned..
[TIMER] record event 2
query epg event id 1902
found event.. store to disc
[TIMER] prepare ok, waiting for begin
[TIMER] activating state 2
[TIMER] start recording
[TIMER] record event 0
AddPopup, id = None
Recording to /media/hdd/movie/20120609 1202 - 7 Central - Sport Special.ts...
POSIX_FADV_RANDOM returned 0
start recording...
RECORD: have 1 video stream(s) (0500), and 1 audio stream(s) (0501), and the pcr pid is 0500, and the text pid is 0502
ADD PID: 0000
ADD PID: 0500
ADD PID: 0501
ADD PID: 0502
Demux size: 770048
setIoPrio failed (Unknown error 4294967207) !
[eFilePushThreadRecorder] THREAD START
[TIMER] record event 4
Traceback (most recent call last):
File "/usr/lib/enigma2/python/mytest.py", line 194, in processDelay
callback(*retval)
File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1768, in recordQuestionCallback
File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 1714, in startInstantRecording
File "/usr/lib/enigma2/python/RecordTimer.py", line 712, in record
File "/usr/lib/enigma2/python/RecordTimer.py", line 656, in saveTimer
IOError: [Errno 28] No space left on device: '/etc/enigma2/timers.xml.writing'
(PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0xc928a0>>,()) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
</enigma2crashlog>
</crashlogs>
</openpli>
Re: crash after install mgcamd #6
-
- Senior Member
- 1,596 posts
+49
Good
Posted 9 June 2012 - 05:36
Still...
--
hemi
It's the DB's flash that is full, not the hard drive... Too many plugins, skins, picons or something installed to flash...IOError: [Errno 28] No space left on device: '/etc/enigma2/timers.xml.writing'
--
hemi
Edited by hemispherical1, 9 June 2012 - 05:38.
Re: crash after install mgcamd #7
-
- Member
- 2 posts
0
Neutral
Posted 17 July 2012 - 17:30
When I changed skin on x-trend et 6000 reciver it crashed.
<?xml version="1.0" encoding="utf-8" ?> - <openpli> - <enigma2> <crashdate>Fri Apr 6 02:01:07 2012</crashdate> <compiledate>Apr 4 2012</compiledate> <contactemail>forum at www.openpli.org</contactemail> - <!-- Please email this crashlog to above address --> <skin>Default Skin</skin> <sourcedate>Apr 4 2012</sourcedate> <branch>(no branch)</branch> <rev /> <version>3.0.0</version> </enigma2> - <image> - <kernelversion> - <![CDATA[ Linux et6x00 3.2.2 #1 SMP Tue Mar 20 23:00:16 CET 2012 mips GNU/Linux ]]> </kernelversion> <kernelcmdline>bmem=216M ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs rw console=ttyS0,115200n8</kernelcmdline> - <nimsockets> - <!-- No such file or directory --> </nimsockets> - <imageversion> - <!-- No such file or directory --> </imageversion> - <imageissue> - <![CDATA[ Welcome to OpenEmbedded Linux openpli 2.1 %h %s %m %r %v ~ HDFreaks modded Image v4.8 ~ ]]> </imageissue> </image> - <software> - <enigma2software> - <![CDATA[ enigma2 - 2.7+git9736+8704978-r31 enigma2-fonts - 2010.11.14-r31 enigma2-plugin-extensions-audiosync - experimental-git3754+f564240-r6 enigma2-plugin-extensions-autobackup - 2.0+git41+3e787da-r0 enigma2-plugin-extensions-autotimer - experimental-git3754+f564240-r6 enigma2-plugin-extensions-backupsuite - 9.1 enigma2-plugin-extensions-bitrate - 2.0+git6+625c8c8-r1 enigma2-plugin-extensions-cooltvguide - Coolman_V5.6.1 enigma2-plugin-extensions-cutlisteditor - 2.7+git9736+8704978-r31 enigma2-plugin-extensions-dreamexplorer - 7.3 enigma2-plugin-extensions-dvdplayer - 2.7+git9736+8704978-r31 enigma2-plugin-extensions-enhancedmoviecenter - 3.0.0 enigma2-plugin-extensions-enhancedpowersave - 2.1.0-20120406 enigma2-plugin-extensions-epgcurrentnextfix - 3.0-r0 enigma2-plugin-extensions-epgrefresh - experimental-git3754+f564240-r6 enigma2-plugin-extensions-epgsearch - experimental-git3754+f564240-r6 enigma2-plugin-extensions-et-multiquickbutton - r2.8.2 enigma2-plugin-extensions-et-portal - 1.1-r0 enigma2-plugin-extensions-et-webbrowser - 1.5.3-r0 enigma2-plugin-extensions-foreca - 2.7+git31+b630921-r0 enigma2-plugin-extensions-fritzcall - experimental-git3754+f564240-r6 enigma2-plugin-extensions-graphmultiepg - 2.7+git9736+8704978-r31 enigma2-plugin-extensions-imdb - experimental-git3754+f564240-r6 enigma2-plugin-extensions-mediaplayer - 2.7+git9736+8704978-r31 enigma2-plugin-extensions-mediascanner - 2.7+git9736+8704978-r31 enigma2-plugin-extensions-moviecut - experimental-git3754+f564240-r6 enigma2-plugin-extensions-nfsserver - 2.0+git2+cff1432-r0 enigma2-plugin-extensions-ofdb - experimental-git3754+f564240-r6 enigma2-plugin-extensions-openwebif - 0.1+git332+866c808-r0.71 enigma2-plugin-extensions-pictureplayer - 2.7+git9736+8704978-r31 enigma2-plugin-extensions-screenposition - 2.0+git2+1ad73e2-r0 enigma2-plugin-extensions-seekbar - experimental-git3754+f564240-r6 enigma2-plugin-extensions-shoutcast - experimental-git3754+f564240-r6 enigma2-plugin-extensions-simpleumount - 0.1+git13+ec988d9-r0 enigma2-plugin-extensions-ticker - 1.0 enigma2-plugin-extensions-tvcharts - experimental-git3754+f564240-r6 enigma2-plugin-extensions-ushare - 1.0+git96+2a7bbe6-r3 enigma2-plugin-extensions-virtualzap - experimental-git3754+f564240-r6 enigma2-plugin-extensions-webmedia - 6.0-r0 enigma2-plugin-extensions-webradiofs - 7.28 enigma2-plugin-extensions-werbezapper - experimental-git3754+f564240-r6 enigma2-plugin-extensions-xmltvimport - 1.0+git38+bfb35fc-r24 enigma2-plugin-extensions-xmltvimport-rytec - 20120123-r0 enigma2-plugin-hdfreaks-hdftoolbox - 4.20120406 enigma2-plugin-skins-pli-hd - 0.1+git355+d683ac1-r0 enigma2-plugin-systemplugins-automaticcleanup - experimental-git3754+f564240-r6 enigma2-plugin-systemplugins-bouquetsprotection - 0.1 enigma2-plugin-systemplugins-commoninterfaceassignment - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-et9x00-vfdsetup - 1.7 enigma2-plugin-systemplugins-fastscan - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-hdmicec - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-hotplug - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-mphelp - experimental-git3754+f564240-r6 enigma2-plugin-systemplugins-networkbrowser - experimental-git3754+f564240-r6 enigma2-plugin-systemplugins-osdpositionsetup - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-pipservicerelation - experimental-git20111106-r0 enigma2-plugin-systemplugins-positionersetup - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-recordinfobar - 1.0-rc12 enigma2-plugin-systemplugins-satelliteequipmentcontrol - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-satfinder - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-skinselector - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-softwaremanager - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-videoenhancement - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-videomode - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-videotune - 2.7+git9736+8704978-r31 enigma2-plugin-systemplugins-wirelesslan - 2.7+git9736+8704978-r31 enigma2-plugins - experimental-git3754+f564240-r6 ]]> </enigma2software> - <gstreamersoftware> - <![CDATA[ gst-plugin-alsa - 0.10.35-r11.1 gst-plugin-amrnb - 0.10.18-r11.1 gst-plugin-amrwbdec - 0.10.18-r11.1 gst-plugin-apetag - 0.10.30-r11.2 gst-plugin-app - 0.10.35-r11.1 gst-plugin-asf - 0.10.18-r11.1 gst-plugin-audioconvert - 0.10.35-r11.1 gst-plugin-audioparsers - 0.10.30-r11.2 gst-plugin-audioresample - 0.10.35-r11.1 gst-plugin-autodetect - 0.10.30-r11.2 gst-plugin-avi - 0.10.30-r11.2 gst-plugin-cdio - 0.10.18-r11.1 gst-plugin-cdxaparse - 0.10.22-r11.3 gst-plugin-decodebin - 0.10.35-r11.1 gst-plugin-decodebin2 - 0.10.35-r11.1 gst-plugin-dvbmediasink - 0.10.1+git6+897025d-r0 gst-plugin-dvdsub - 0.10.18-r11.1 gst-plugin-flac - 0.10.30-r11.2 gst-plugin-flv - 0.10.30-r11.2 gst-plugin-icydemux - 0.10.30-r11.2 gst-plugin-id3demux - 0.10.30-r11.2 gst-plugin-isomp4 - 0.10.30-r11.2 gst-plugin-mad - 0.10.18-r11.1 gst-plugin-matroska - 0.10.30-r11.2 gst-plugin-mms - 0.10.22-r11.3 gst-plugin-mpegaudioparse - 0.10.18-r11.1 gst-plugin-mpegdemux - 0.10.22-r11.3 gst-plugin-mpegstream - 0.10.18-r11.1 gst-plugin-ogg - 0.10.35-r11.1 gst-plugin-playbin - 0.10.35-r11.1 gst-plugin-rtmp - 0.10.22-r11.3 gst-plugin-rtp - 0.10.30-r11.2 gst-plugin-rtpmanager - 0.10.30-r11.2 gst-plugin-rtsp - 0.10.30-r11.2 gst-plugin-souphttpsrc - 0.10.30-r11.2 gst-plugin-subparse - 0.10.35-r11.1 gst-plugin-subsink - 0.10.0+git1+a625310-r0 gst-plugin-typefindfunctions - 0.10.35-r11.1 gst-plugin-udp - 0.10.30-r11.2 gst-plugin-vcdsrc - 0.10.22-r11.3 gst-plugin-vorbis - 0.10.35-r11.1 gst-plugin-wavparse - 0.10.30-r11.2 gstreamer - 0.10.35-r0 ]]> </gstreamersoftware> </software> - <crashlogs> - <enigma2crashlog> - <![CDATA[ + (1) Background File Eraser + (5) Tuxtxt + (8) graphics acceleration manager + (9) GFBDC 812k video mem 140292kB available for acceleration surfaces. resolution: 720 x 576 x 32 (stride: 7208576) + (9) gLCDDC couldn't open LCD - load lcd.ko! lcd buffer 0x6e0d80 8448 bytes, stride 132 + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Found 0 input devices! + (22) Hdmi CEC driver + (30) eActionMap + (35) CI Slots scanning for common interfaces.. cannot open /proc/stb/tsmux/input0 cannot open /proc/stb/tsmux/input1 done, found 0 common interface slots + (35) CA handler + (36) Stream server + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB reached rl 70 ---- opening lame channel db reading services (version 4) loaded 3486 services found 0 adapter, 0 frontends(0 sim) and 0 demux, boxtype 0 Use valid Linux Time <img src='http://openpli.org/forums/public/style_emoticons/<#EMO_DIR#>/smile.png' class='bbc_emoticon' alt=':)' /> (RTC?) [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... found 8 spinner! setIoPrio best-effort level 3 ok main thread is non-idle! display spinner! PC: 771d008c 00000000 10008b00 007f06e0 007f06e0 007f06e0 a1c5ab90 00000000 a1c5acd0 00000000 00000000 00000000 76ce4000 00000000 00000000 00000064 00600000 00000000 006dd700 007dca88 ffffffff 76cbf798 ffffff9c ffffff9c ff000000 005f997c 771d0040 00000001 00000000 77484130 76cbf748 00000000 004e4660 ------- ---------------- you should upgrade to new drivers for the hardware detection to work properly ---------------- fallback to detect hardware via /proc/cpuinfo!! [Harddisk] enumerating block devices... ]]> </enigma2crashlog> </crashlogs> </openpli>
Edited by WanWizard, 17 July 2012 - 17:35.
put the log in a code block
Re: crash after install mgcamd #8
-
- PLi® Core member
- 70,897 posts
+1,833
Excellent
Posted 17 July 2012 - 17:36
The logs says:
So I suggest you're visiting the wrong forum?
~ HDFreaks modded Image v4.8 ~
So I suggest you're visiting the wrong forum?
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: crash after install mgcamd #9
-
- Senior Member
- 4,631 posts
+225
Excellent
Posted 17 July 2012 - 18:17
And the log is very old
So probably picked the wrong crashlog?
<crashdate>Fri Apr 6 02:01:07 2012</crashdate>
So probably picked the wrong crashlog?
Re: crash after install mgcamd #10
-
- Member
- 2 posts
0
Neutral
Posted 17 July 2012 - 19:20
It s maybe I haven’t changed the data on receiver. The data was on factory defaults. I could use this receiver only 1 week.Again want to say It happened when I changed the skin, as a receiver restarted and went into a standby. Two front lights green and red lights. I tried to download a new boot with a new image but without result. It is strange that old and new software according correct boot of course via COM port and usb filled without a problem but the receiver does not get starting.. Carried in a service there, too, did not understand anything said that the first time to see like this.
At this moment my X-trend et 6000 receiver useless.
At this moment my X-trend et 6000 receiver useless.
Edited by rasaddom, 17 July 2012 - 19:24.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
