I have configured it like that yesterday.
I just checked on the website, still 'Last Update: 2014-05-02 16:01:17 PDT'.
where is the inadyn plugin?
Started by ARNOLD65, 28 Jun 2012 09:20
27 replies to this topic
Re: where is the inadyn plugin? #21
-
- Senior Member
- 2,075 posts
+11
Neutral
Posted 16 May 2014 - 14:15
Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.
Re: where is the inadyn plugin? #22
-
- Senior Member
- 2,075 posts
+11
Neutral
Posted 17 May 2014 - 14:54
So, it doesn't work.I have configured it like that yesterday.
I just checked on the website, still 'Last Update: 2014-05-02 16:01:17 PDT'.
Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.
Re: where is the inadyn plugin? #23
-
- Senior Member
- 1,030 posts
+65
Good
Posted 17 May 2014 - 14:57
Has the IP changed since then?
No change, no update ...
No change, no update ...
1st box: Vu+ Ultimo 4k 4xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
2nd box: Gigablue Quad 4k 2xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
testing boxes: Vu+ Duo² + AX Quadbox HD2400 + 2x Vu+ Solo² + Octagon SF4008
Sats & Pay-TV: Astra 19.2°E + Hotbird 13°E with Redlight / SCT HD / SES Astra HD- / Sky V14 / 4th empire propaganda TV
Card-Server: Raspberry Pi + IPv6-capable oscam
Router: Linksys WRT1900ACS w/ LEDE + Fritz!Box 7390
2nd box: Gigablue Quad 4k 2xDVB-S2 FBC / 2xDVB-C / 1.8 TB HDD / OpenATV 6.2
testing boxes: Vu+ Duo² + AX Quadbox HD2400 + 2x Vu+ Solo² + Octagon SF4008
Sats & Pay-TV: Astra 19.2°E + Hotbird 13°E with Redlight / SCT HD / SES Astra HD- / Sky V14 / 4th empire propaganda TV
Card-Server: Raspberry Pi + IPv6-capable oscam
Router: Linksys WRT1900ACS w/ LEDE + Fritz!Box 7390
Re: where is the inadyn plugin? #24
-
- Senior Member
- 2,075 posts
+11
Neutral
Posted 17 May 2014 - 15:07
No, I guess not.Has the IP changed since then?
No change, no update ...
So, this program is checking my WAN-IP or do they only show updates at no-ip when the WAN-IP actually changed?
I will check this later with the update-tool on a Windows PC.
When my stb reboots do I need to start inadyn-mt manually again?
If so, how can I make it start automatically after reboot?
(An answer like 'with a script' is not sufficient for me).
Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.
Re: where is the inadyn plugin? #25
-
- Senior Member
- 91 posts
0
Neutral
Posted 20 November 2014 - 14:43
When my stb reboots do I need to start inadyn-mt manually again?
If so, how can I make it start automatically after reboot?
(An answer like 'with a script' is not sufficient for me).
Same questions, anyone?
Re: where is the inadyn plugin? #26
-
- Member
- 8 posts
0
Neutral
Posted 26 June 2015 - 09:08
Hello !
I have installed inadyn-mt from feed (dm800se) and it was successfully installed.
I modified config, but it is not started.....
(etc/init-d/ inadin-mt restart)
no /usr/bin/inadyn-mt found; none killed
Maybe this file inadyn-mt in usr/bin is broken ?
Help please
Edited by kuku, 26 June 2015 - 09:12.
Re: where is the inadyn plugin? #27
-
- Senior Member
- 2,075 posts
+11
Neutral
Posted 20 July 2015 - 01:56
Maybe a bit late, and I have changed to a duckdns domain, but this is what I have done:
In Telnet:
opkg update
opkg install inadyn-mt
Then you have to create the file /etc/inadyn.cfg (or edit it when it already exists).
Go to www.duckdns.org and log in.
Go to the page Install.
In 'first step - choose a domain' choose the domain you want to be updated by inadyn.
Click on inadyn.
Copy - paste the configuration in inadyn.cfg and add --log_file /tmp/inadyn.log :
--log_file /tmp/inadyn.log
--dyndns_server_name www.duckdns.org
--username nouser
--password 5212327d-8a7e-4bab-ab67-e7680840b135
--update_period 60000
--forced_update_period 320000
--alias lexzie
--verbose 0
--dyndns_server_url /nic/?
--syslog
--background
Adjust /usr/bin/enigma2.sh :
Find the line beginning with:
LD_PRELOAD=/usr/lib/libopen.so.0.0 /usr/bin/enigma2
And add a line above that with:
inadyn-mt
Reboot Enigma2.
You can test if it works bij manually changing your IP-adres on www.duckdns.org and wait for the next check or reboot again.
Dreambox DM920:2x Triple tuner (2x DVB-S2X MIS and DVB-C/T2) Xtrend ET10000: 2x DVB-S2, 2x DVB-C, IPTV Xtrend ET9500 (defect)
Channel Master 120cm offset + Black Ultra LNB (Ku-band): 42°E-37,5°W - 100cm SAB draaibaar: 45.1°E-60°E - 80cm vast: 28.2°E/23.5°E/19.2°E/13°E
DVB-T2 en DAB via een combi VHF/UHF-antenne op zolder gericht op Schoten.
Re: where is the inadyn plugin? #28
-
- Senior Member
- 182 posts
+2
Neutral
Posted 22 May 2016 - 13:15
@Alex_NL Huge thanks for the setup tip. Works great!
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users
