I noticed that cross right and left do not work any more as spool command back and forward when play movies.
Also I thougt that Mark button was for inserting a marks when playing movies bit it does not work it jusr shows a sign on top of the screen as, I supose is sign, undefined or non allowed command.
Any work around for this ?
Remote controller Mark and spool commands
Started by boxer, 09 Jul 2012 09:21
4 replies to this topic
Re: Remote controller Mark and spool commands #2
-
- Member
- 17 posts
0
Neutral
Posted 14 July 2012 - 12:28
Hi,
I've discovered the same issue after updating OpenPli 2.1 on my ET9200 in mid/late June and did not find any solution for the problem yet.
The "search" function that was available on left/right arrow buttons while playing recordings (I'm using EMC as media center) is not available after updating the image. I have an image backup dated mid May and there it is still available.
Does anybody know how to fix this or at least what that function is called exactly and if it is something that a plugin provides or if it is/was a function of OpenPli itself?
Does it still work for someone on newer images?
Best regards,
PainHealer
I've discovered the same issue after updating OpenPli 2.1 on my ET9200 in mid/late June and did not find any solution for the problem yet.
The "search" function that was available on left/right arrow buttons while playing recordings (I'm using EMC as media center) is not available after updating the image. I have an image backup dated mid May and there it is still available.
Does anybody know how to fix this or at least what that function is called exactly and if it is something that a plugin provides or if it is/was a function of OpenPli itself?
Does it still work for someone on newer images?
Best regards,
PainHealer
Re: Remote controller Mark and spool commands #3
-
- Senior Member
- 1,573 posts
+33
Good
Posted 14 July 2012 - 12:53
all EMC functionallity is build in the image, so maybe install EMC=double=trouble?
ET10000 C C C C/T 2TB HDD ET7000 + ET6000 dvb-S OpenPli Triax 88 multifeed quad LNBs VU Uno4K SE C+2TB HDD Mutant HD60
Re: Remote controller Mark and spool commands #4
-
- Member
- 17 posts
0
Neutral
Posted 14 July 2012 - 13:03
Hi
I was'nt aware of that. Are really all functions that EMC brings fully integrated in OpenPli 2.1 and there is really no need to install something in addition?
I just flashed a fresh OP 3.0 and it seems that the "search" function like in my 2.1 image from May is also not available in 3.0's integrated "Media Center". When using the arrow butons, only simple forward/backward spooling with 2x/4x/8x... and so on is available. In my old image a can choose from several options like how many minutes to "jump" and things like that when using the arrow buttons.
I'm a little it confused atm.
Regards
Pain Healer
all EMC functionallity is build in the image, so maybe install EMC=double=trouble?
I was'nt aware of that. Are really all functions that EMC brings fully integrated in OpenPli 2.1 and there is really no need to install something in addition?
I just flashed a fresh OP 3.0 and it seems that the "search" function like in my 2.1 image from May is also not available in 3.0's integrated "Media Center". When using the arrow butons, only simple forward/backward spooling with 2x/4x/8x... and so on is available. In my old image a can choose from several options like how many minutes to "jump" and things like that when using the arrow buttons.
I'm a little it confused atm.
Regards
Pain Healer
Re: Remote controller Mark and spool commands #5
-
- Member
- 17 posts
0
Neutral
Posted 14 July 2012 - 17:10
Ok,
problem solved! The function I was looking for comes from the extension/plugin "Seekbar" and in addition the following lines were missing in my keymap.xml file's "Infobar..." and "Mediaplayer..." sections (guess the keymap.xml has been updated in May/June and these entries got lost):
<key id="KEY_LEFT" mapto="seekBackManual" flags="m" />
<key id="KEY_RIGHT" mapto="seekFwdManual" flags="m" />
It was still possible to run "Seekbar" by long-pressing "<<" or ">>".
problem solved! The function I was looking for comes from the extension/plugin "Seekbar" and in addition the following lines were missing in my keymap.xml file's "Infobar..." and "Mediaplayer..." sections (guess the keymap.xml has been updated in May/June and these entries got lost):
<key id="KEY_LEFT" mapto="seekBackManual" flags="m" />
<key id="KEY_RIGHT" mapto="seekFwdManual" flags="m" />
It was still possible to run "Seekbar" by long-pressing "<<" or ">>".
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
