Not sure if this affects dmm stb's too as I havent been able to check..
/proc/bus/usb always remains empty, and lsusb -v also fails to show any verbose output. making it a bit hard to work with usb hardware in some cases..
running "mount usbfs -t usbfs /proc/bus/usb" will populate /proc/bus/usb, but lsusb still lacks verbosity (-v, -vv). is there some way to fix this?
usb information and lsusb verbosity on vu+
Started by spock, 24 Jul 2012 10:09
10 replies to this topic
Re: usb information and lsusb verbosity on vu+ #2
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 24 July 2012 - 18:33
lsusb misses verbosity because busybox's lsusb doesn't provide those details
BTW, busybox lsusb should work with /sys instead of /proc/usb I believe
BTW, busybox lsusb should work with /sys instead of /proc/usb I believe
Re: usb information and lsusb verbosity on vu+ #3
-
- Senior Member
- 214 posts
+1
Neutral
Posted 25 July 2012 - 17:56
Thanks for explaining.
Re: usb information and lsusb verbosity on vu+ #4
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 25 July 2012 - 18:32
By the way, we have the 'full' lsubs in the feed, if you really need it.
opkg update && opkg install usbutils-ids
opkg update && opkg install usbutils-ids
Re: usb information and lsusb verbosity on vu+ #5
-
- Senior Member
- 2,621 posts
+30
Good
Posted 24 December 2015 - 23:49
I have just found this thread about lsusb.
My ET9000 outputs the following from lsusb:
Bus 001 Device 002: ID 125f:a02a Bus 002 Device 002: ID 1a40:0101 Bus 001 Device 001: ID 1d6b:0002 Bus 002 Device 001: ID 1d6b:0002 Bus 003 Device 001: ID 1d6b:0001 Bus 004 Device 001: ID 1d6b:0001 Bus 002 Device 003: ID dead:beef
The same is shown when I run lsusb -v.
Is this correct? Nothing more meaningful?
What is the interpretation of the above output?
Edited by Robinson, 24 December 2015 - 23:49.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: usb information and lsusb verbosity on vu+ #6
-
- PLi® Core member
- 8,458 posts
+327
Excellent
Posted 25 December 2015 - 06:41
Did you install full lsusb?
By the way, we have the 'full' lsubs in the feed, if you really need it.
opkg update && opkg install usbutils-ids
Wavefield T90: 0.8W - 1.9E - 4.8E - 13E - 16E - 19.2E - 23.5E - 26E - 33E - 39E - 42E - 45E on EMP Centauri DiseqC 16/1
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Unamed: 13E Quattro - 9E Quattro on IKUSI MS-0916
Re: usb information and lsusb verbosity on vu+ #7
-
- Senior Member
- 2,621 posts
+30
Good
Posted 25 December 2015 - 10:22
root@et9x00:~# opkg update && opkg install usbutils-ids
Downloading http://downloads.pli...x00/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-3rd-party-et9x00.
Downloading http://downloads.pli...rty/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-3rd-party.
Downloading http://downloads.pli...all/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-all.
Downloading http://downloads.pli...x00/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-et9x00.
Downloading http://downloads.pli...2el/Packages.gz.
Updated list of available packages in /var/lib/opkg/openpli-mips32el.
Package usbutils-ids (007-r0.9) installed in root is up to date.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: usb information and lsusb verbosity on vu+ #8
-
- PLi® Core member
- 46,969 posts
+541
Excellent
Posted 25 December 2015 - 10:35
install usbutils to begin with. The busybox implementation of lsusb, is, as usual, very limited.
* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.
Re: usb information and lsusb verbosity on vu+ #9
-
- Senior Member
- 2,621 posts
+30
Good
Posted 25 December 2015 - 12:11
Thanks. That's more like it. 
Bus 002 Device 003: ID dead:beef
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 125f:a02a A-DATA Technology Co., Ltd.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
By the way, "dead beef" looks very funny.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Re: usb information and lsusb verbosity on vu+ #10
-
- PLi® Core member
- 70,439 posts
+1,809
Excellent
Posted 25 December 2015 - 12:19
dead beef is the security module.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: usb information and lsusb verbosity on vu+ #11
-
- Forum Moderator
PLi® Contributor - 5,956 posts
+191
Excellent
Posted 25 December 2015 - 12:22
If it's (dead beef) not there then your in trouble, because your security board is gone.
Hardware: Vu+ Uno 4K SE - Vu+ Duo 4K - Fuba 78 cm - Tripleblock LNB Quad 19.2/23.5/28.2 - DS918+
Software : OpenPLi - OSCam - Settings van Hans - Autotimer - EPGImport
---------------------------------------------------------------------------------------------------------------------------------------
Remember: Upvote with the 
button for any user/post you find to be helpful, informative, or deserving of recognition!
---------------------------------------------------------------------------------------------------------------------------------------
Many answers to your question can be found in our new and improved wiki
4 user(s) are reading this topic
0 members, 4 guests, 0 anonymous users
