Jump to content


Photo

diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys

et6000

  • Please log in to reply
19 replies to this topic

#1 HighTech

  • Member
  • 11 posts

0
Neutral

Posted 25 July 2012 - 10:46

Bootscreen: Version 2.86 (Bootloader)
Hardware: ET6000 (92-2)
Image: Openpli 2.1
Kernel Version : 3.3.0
Enigma: Jul 21 2012
Last Update: Jul 22 2012 12:29:02
identified Tuner: Tuner A: AVL2108 (DVB-S2)
Path on memorystickt: Computer -> STORE N GO (E: ) -> et6x00 -> imageversion, kernel.bin, noforce, rootfs.bin

Hello,
I tried to reinstall the ET 6000 like you do when you have problems with your PC.
My main problems are:[list]
[*]you have to hit the on-off power switch at the backside of the box 2-3 times on off until the box turns on
[*]the keys at the front of the box don’t have any function
[*]when I would like to enter deep standby mode the screen “your STB is turning off” (german: Ihre STB wird ausgeschaltet.) remains permanently and the box doesn’t enter deep standby mode
[*]recording tv broadcast doesn’t work sometimes: infoscreen: In order to execute the timer recording, it is switched to the to be recorded channel (german: Um die Timeraufnahme durchzuführen wird auf den aufzunehmenden Kanal umgeschaltet) When this problem happens, it doesn't record but only creates an timer in the timer list.
[*]updating bootloader / firmware doesn't work
[/list]
In order to solve the deep-standby problem I tried to install the new Bootloder 02.2012 and the new firmware version OpenPLi-2.1-beta-et6x00-20120724_usb.
But the box starts normally, even though I have plugged in the memory stick with the folder et6x00 on it into the front usb interface. The box doesn’t recognize the bootloader update on the stick. The same thing with the firmware update. I have tried another memory stick, too.
Unfortunately no success.
What can I do or is there another possibility to update the bootloader, firmware by telnet, ftp-client or something?
Can I test whether the front keys on the front of the box are sending keystrokes but maybe the firmware doesn’t process, handle them or they are not associated/conjugated with/ to a function (e.g change channel…)?
Many thanks in advance.
Hightech

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #2 spock

  • Senior Member
  • 214 posts

+1
Neutral

Posted 25 July 2012 - 11:03

On my ultimo the same thing happens with certain USB sticks, especially USB3 sticks. The stb doesn't recognize them at all, so no update possible. Using an older plain USB2 stick works fine.

Also when there is something else connected to any other USB port, the update will fail, with any USB stick. Atleast on my ultimo, I think the bootloader is pretty crappy seeing how this happens..

Perhaps you're seeing something similar?

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #3 HighTech

  • Member
  • 11 posts

0
Neutral

Posted 25 July 2012 - 13:49

I have read in another board (board of the manufacturer), that there maybe a series defect: The securitybord gets broken by using DeepStandby...
Nevertheless thanks to all.

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #4 HighTech

  • Member
  • 11 posts

0
Neutral

Posted 25 July 2012 - 15:28

by renaming unforce to force the box has started firmware update :)

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #5 HighTech

  • Member
  • 11 posts

0
Neutral

Posted 25 July 2012 - 15:36

and the keys at the frontpanel are working again... :)
something strange:
up->executes ok
down -> down
right-> up

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #6 guirigui

  • Senior Member
  • 297 posts

0
Neutral

Posted 26 July 2012 - 11:50

Hello,

Same issue with my ET6000 after deepstandby....no more boot..just the pinguins...
Tried to flash several images with same result..at the end no more flashing process could start...
Sent it back to the shop...the guy is discussing with X-trend to solve the problem...
ET6000 mounted in triple tuners with DVB-S2 Anysee E7 S2 + DVB-T Twintech UT30

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #7 HighTech

  • Member
  • 11 posts

0
Neutral

Posted 26 July 2012 - 23:59

Hello,

Same issue with my ET6000 after deepstandby....no more boot..just the pinguins...
Tried to flash several images with same result..at the end no more flashing process could start...
Sent it back to the shop...the guy is discussing with X-trend to solve the problem...


i solved the problem by flashing the firmware by renaming unforce to force....
but bootloader flashing is still impossible
2 times turning switch on off to boot (start the box)...

Edited by HighTech, 27 July 2012 - 00:02.


Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #8 guirigui

  • Senior Member
  • 297 posts

0
Neutral

Posted 4 August 2012 - 09:28

HI,

It look like there is a serious quality issue on all ET6000 as reported in several forums including Xtrend support.

Two cases,
all those that neither use deep standby could not see any problem.
but as soon you are willing to use this feature the STB goes into troubles....
ET6000 mounted in triple tuners with DVB-S2 Anysee E7 S2 + DVB-T Twintech UT30

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #9 guirigui

  • Senior Member
  • 297 posts

0
Neutral

Posted 4 August 2012 - 09:37

More infos:
http://www.et-view-s...t.php?issueid=1

I fear that XTrend has to change all ET6000 motherboards as it is often difficult to change only one component due to surface mounting...

Edited by guirigui, 4 August 2012 - 09:38.

ET6000 mounted in triple tuners with DVB-S2 Anysee E7 S2 + DVB-T Twintech UT30

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #10 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 4 August 2012 - 15:25

When it is induced due to a newer bootloader... it should be solvable by again a newer bootloader...

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #11 guirigui

  • Senior Member
  • 297 posts

0
Neutral

Posted 5 August 2012 - 08:29

When it is induced due to a newer bootloader... it should be solvable by again a newer bootloader...


I hope so.....
If so simple to fix the issue via new bootloader, that should have been settled in a minute by providing new one..
Obviously that not the case...
I am rather pessimisctic as the symptom is more that of sudden circuit fealure after certain working time...
As you can observe, all ET6000 have problem almost at the same time...

Edited by guirigui, 5 August 2012 - 08:34.

ET6000 mounted in triple tuners with DVB-S2 Anysee E7 S2 + DVB-T Twintech UT30

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #12 littlesat

  • PLi® Core member
  • 56,123 posts

+685
Excellent

Posted 5 August 2012 - 16:27

But wasn't the issue introduced after a bootloader upgrade?... then it should be fixed by another bootloader upgrade and we've to wait for a new revision of bootloader (as it seems you cannot downgrade).

WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W


Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #13 guirigui

  • Senior Member
  • 297 posts

0
Neutral

Posted 5 August 2012 - 22:26

But wasn't the issue introduced after a bootloader upgrade?... then it should be fixed by another bootloader upgrade and we've to wait for a new revision of bootloader (as it seems you cannot downgrade).


No bootloader upgrade done...so far I now, the ET6000 is pretty recent...the installed bootloader had not to be upgraded....
ET6000 mounted in triple tuners with DVB-S2 Anysee E7 S2 + DVB-T Twintech UT30

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #14 kalehrl

  • Senior Member
  • 468 posts

+8
Neutral

Posted 6 August 2012 - 08:00

But wasn't the issue introduced after a bootloader upgrade?

I don't think so.
I had this problem from the very beginning and in the mean time changed 2 bootloaders and still the same problem.
I think this is hardware problem with some series.

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #15 Taykun345

  • Senior Member
  • 1,296 posts

+41
Good

Posted 6 August 2012 - 08:10

This is what happens when they are making hardware for cheap prices. I have et-5000 and i am not satisfied with hardware quality. It works but i have a feeling that soon there will be problems. I had problems with another ET-5000 which was dead-on-arrival.
Army MoodBlue HD skin modification by me: https://github.com/T...-MoodBlueHD-mod
Matrix10 MH-HD2 skin modification by me: https://github.com/B...-MX-HD2-OpenPli
MetrixHD skin modification by me: https://github.com/T...xHD-WPstyle-mod
Slovenian translation for OpenPLi E2: https://github.com/T...ion-for-OpenPLi

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #16 guirigui

  • Senior Member
  • 297 posts

0
Neutral

Posted 6 August 2012 - 08:13

By the way, what is the flashrom hardware configuration?

Is there one separate "small" flashrom circuit for bootloader plus the "big" flashrom for image???
In that case the botloader part is OK as I have been told by OpenPLi people, one can observe the twin pinguins...

If this is right, that is flashrom circuit fealure...

Edited by guirigui, 6 August 2012 - 08:15.

ET6000 mounted in triple tuners with DVB-S2 Anysee E7 S2 + DVB-T Twintech UT30

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #17 guirigui

  • Senior Member
  • 297 posts

0
Neutral

Posted 6 August 2012 - 08:56

In addition, very often in such situation, this can be simply one command gate for powering the flashrom that messes up the STB...
Usualy, the flashrom itself is very reliable...may be not the case for periphéral circuits..


ET6000 mounted in triple tuners with DVB-S2 Anysee E7 S2 + DVB-T Twintech UT30

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #18 kalehrl

  • Senior Member
  • 468 posts

+8
Neutral

Posted 6 August 2012 - 13:09

Security boards are the problem in some series.
They are, or become faulty after some time and have to be replaced.

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #19 guirigui

  • Senior Member
  • 297 posts

0
Neutral

Posted 7 August 2012 - 07:38

Security boards are the problem in some series.
They are, or become faulty after some time and have to be replaced.


Hello,
Do you know what is exactly this security board?
One can see these words mentioned on the mother board close to the battery...
ET6000 mounted in triple tuners with DVB-S2 Anysee E7 S2 + DVB-T Twintech UT30

Re: diverse problems: Xtrend ET 6000, Openpli 2.1, 3.3.0, Jul 21 2012 booting, recording, DeepStandby, frontpanel keys #20 kalehrl

  • Senior Member
  • 468 posts

+8
Neutral

Posted 7 August 2012 - 13:06

The battery is on the security board.
AFAIK, the board is a protection from cloning.
It checks together with drivers if the receiver is original or clone.
The trouble with it is that if it defective, the receiver won't boot and has to be repaired.



Also tagged with one or more of these keywords: et6000

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users