14 replies to this topic

[apsalt]

Please insert epg for the following channels:

Channel5 - 1_0_1_1E18_809_2_11C0000_0_0_0

Channel5+1 - 1_0_1_1E28_809_2_11C0000_0_0_0

5USA - 1_0_1_1E1E_809_2_11C0000_0_0_0

5USA+1 - 1_0_1_1E1F_809_2_11C0000_0_0_0

5* - 1_0_1_1E23_809_2_11C0000_0_0_0

5*+1 - 1_0_1_1E24_809_2_11C0000_0_0_0

Thank you in advance.

[Robinson]

Are you sure you are using common reference numbers?
Normally, most if not all channels on Astra/Eurobird 28.2 use 11A0000 and not 11C0000.
If you change the number in your channel list, you will probably get your EPG back.

[apsalt]

I´ll give it a try.
All the other channels use A and not C. No problems with EPG there.

[apsalt]

No luck. With the channel reference "A" I can´t recieve the channel.

[apsalt]

I´ll give it a try.
All the other channels use A and not C. No problems with EPG there.

Sorry my mistake. All the channels I recieve use "C" and not "A"

[Robinson]

And do you get Rytec EPG on those other channels? I don't think so.
If I look into rytec.channels.xml, there aren't any channels with 11C0000 in them.

[apsalt]

Yes I do. The channels i´ve listed are the only ones without epg. I use EPG Import with a VU Duo and load 7 seven days epg. All the other UK Freeview channels get epg. As mentioned before, they all have "C".
I have checked the channel lists and can´t find "A". I have even had to change the channel reference of each picon to get them displayed.

[rytec]

Have you already tried another settingslist/bouquetlist ?

[apsalt]

There are frequencies with A, for example:

1_0_1_1E17_7F5_2_11A0000_0_0_0

This is also Channel5 but It stays blach (no reception). There are also no vaues by VPID/APID/TPID and PPID.

[Robinson]

And what if you run a manual channel search for 28.2E?

[apsalt]

Didn´t help either. Channel 5 HD 1_0_19_F12_7ED_2_11A0000_0_0_0 has got EPG but I don´t get a picture.

[Robinson]

I think you have incorrect data in your lamedb file.
Have a look at this thread http://openpli.org/f...y-channel-list/ as regards lamedb.

[apsalt]

I´ll have a look. Thanks for all the support.

[apsalt]

No problems with Lamedb. I have noticed someting else however. All the UK Channels I recieve are on 28.4 and not 28.2. Also the 28.4 channels are all C0000 and the 28.2 channels are all A0000.

Is it possible to add epg fpr the earlier mentioned channels on 28.4.

I have tried changing the satelites.xml with Astra 1n but my signal strength is to weak. I don´t wan´t to move the dish because i recieve 19.2 and 28.4 using a multiswitch.

One more question. Can i simply add the transponder details from Astra 1n into the Astra/Eurobird ordner in satelites.xml?

[doglover]

THis is outside my knowledge.

Willy