hi guys
need some help...
i have a vu+ with the last openpli image.
i have a dvb-c tuner and a dvb-s2, for the dvb-c i use ccam and for the dvb-s2 mgcamd. is it normal that i have to change the emu manually everytime i change a channel between both tuner ? or where can i configure this ?
Is it possible to configure it like this: tunerA = Mgcamd and tuner B= ccam ?
A big thx in advance
L
Change ccam to mgcamd when changing tuner
Started by lionel7, 05 Nov 2012 15:13
8 replies to this topic
Re: Change ccam to mgcamd when changing tuner #2
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 5 November 2012 - 15:24
you cannot run two softcams at the same time, but you want to use both tuners at the same time.
So your situation cannot be solved.
So your situation cannot be solved.
Re: Change ccam to mgcamd when changing tuner #3
-
- Member
- 10 posts
+1
Neutral
Posted 5 November 2012 - 15:31
hi
mmmhh my english is not good, sorry.
i don't want to use two tuner at the same time. i just want the box to automaticaly change the emu when i change the tuner.
so let's say i'm watching something on dvb-c with ccam and then i want to zap on another channel on the dvbs-2 tuner, then what i need is that the box automatically stop the ccam and start the mgcamd.
is it possible ?
thx
mmmhh my english is not good, sorry.
i don't want to use two tuner at the same time. i just want the box to automaticaly change the emu when i change the tuner.
so let's say i'm watching something on dvb-c with ccam and then i want to zap on another channel on the dvbs-2 tuner, then what i need is that the box automatically stop the ccam and start the mgcamd.
is it possible ?
thx
Re: Change ccam to mgcamd when changing tuner #4
-
- Member
- 10 posts
+1
Neutral
Posted 5 November 2012 - 15:33
or assign an emu to a bouquet ?
Re: Change ccam to mgcamd when changing tuner #5
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 5 November 2012 - 15:35
what if a scheduled recording starts while you're watching tv?
(or two scheduled recordings are running at the same time?)
Both tuners can be active at the same time, but you cannot run two softcams at the same time.
So your situation cannot be solved.
(or two scheduled recordings are running at the same time?)
Both tuners can be active at the same time, but you cannot run two softcams at the same time.
So your situation cannot be solved.
Edited by pieterg, 5 November 2012 - 15:35.
Re: Change ccam to mgcamd when changing tuner #6
-
- Member
- 10 posts
+1
Neutral
Posted 5 November 2012 - 15:46
ok thanks
i have no HDD and do not record. So it wouldn't be a problem
i have no HDD and do not record. So it wouldn't be a problem
Re: Change ccam to mgcamd when changing tuner #7
-
- Senior Member
- 164 posts
+1
Neutral
Posted 5 November 2012 - 18:01
This is possible what you ask, just no-one has bothered to do it... if only i could code 
Being able to run two or more softcams attached to whatever tuner your using is certainly a very useful feature, it's a feature i would very much like, maybe in enigma 2 this isn't possible yet, finggers crossed for enigma 3...
I think this is the solution your looking for below...
Here is a solution for you, this changes the softcam automatically depending on the provider, channel or whatever:
http://openpli.org/f...tup#entry283208
Being able to run two or more softcams attached to whatever tuner your using is certainly a very useful feature, it's a feature i would very much like, maybe in enigma 2 this isn't possible yet, finggers crossed for enigma 3... I think this is the solution your looking for below...
Here is a solution for you, this changes the softcam automatically depending on the provider, channel or whatever:
http://openpli.org/f...tup#entry283208
Re: Change ccam to mgcamd when changing tuner #8
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 5 November 2012 - 19:04
It will not work for 99% of the people, because the tuners are allocated whenever they are needed.
That's the reason nobody implemented this, nobody likes to implement something which will only work under a very strict set of limitations (which cannot be forced)
That's the reason nobody implemented this, nobody likes to implement something which will only work under a very strict set of limitations (which cannot be forced)
Re: Change ccam to mgcamd when changing tuner #9
-
- Member
- 10 posts
+1
Neutral
Posted 5 November 2012 - 21:03
Thx for your help :-)
Plugin Works perfectly for my need
Regards
Plugin Works perfectly for my need
Regards
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
