OpenPLi 3.0 issues (Openwebif and AC3 Sound)
#1
Posted 6 November 2012 - 09:14
I came from the last OpenPLi 2.1. from 0924, which did not show any of the following issues:
1. Openwebif:
I received the following error message in my browser (latest Firefox on Windows 7, same on my Android tablet): 404 page not found (/cgi-bin/Home.sh)
After switching the Openwebif settings from Port 80 to Port 81 everything worked fine.
2. AC3 Sound:
No sound after wakeup from Standby (also Deep Standby), when AC3/DTS Downmix is set to off and AC3 sound track is activated (AC3 is preffered track in my language settings).
No sound when I zap from a channel with mpeg track to a channel with AC3 track. AC3/DTS Downmix in AV settings is always off!
After switching "Yellow button -> AC3/DTS Downmix" on and off sound with AC3 track is available again.
No problems, when AC3/DTS Downmix is generally set to on.
Re: OpenPLi 3.0 issues (Openwebif and AC3 Sound) #2
Re: OpenPLi 3.0 issues (Openwebif and AC3 Sound) #3
Posted 6 November 2012 - 09:27
I had yesterday also issues with AC3.... sometimes but not always after a ZAP the AC3 sound was not hearable....
If you are "coming" from ac3 channel to ac3 channels,sound is hearable,or switch between cnannels with ac3-no problem.I solve problem,if I turn on/off downmix.
Gigablue Quad +250GB HDD ~ Xtrend ET5000 ~ Triax110 Black Multifeed 36E/28E/23E ~ Total TV88 Multifeed 19E/16E/13E/9-7E ~ EMP Centauri 9/1 DiSEqC ~ Panasonic L42G20
Re: OpenPLi 3.0 issues (Openwebif and AC3 Sound) #4
Re: OpenPLi 3.0 issues (Openwebif and AC3 Sound) #5
Posted 6 November 2012 - 09:33
yes,but problem is here :)I didnt touch anytihing,yesterday make a clean install and the same situation ....I updated my samsung surround set last weekend... before I did not have any issues. In our commits I see nothing related....
Gigablue Quad +250GB HDD ~ Xtrend ET5000 ~ Triax110 Black Multifeed 36E/28E/23E ~ Total TV88 Multifeed 19E/16E/13E/9-7E ~ EMP Centauri 9/1 DiSEqC ~ Panasonic L42G20
Re: OpenPLi 3.0 issues (Openwebif and AC3 Sound) #6
Posted 6 November 2012 - 10:22
toslink from box to home cinema, downmix off.
i get rid of it with switch between next channel with ac3 and back
Edited by metoo, 6 November 2012 - 10:23.
ET10000 C C C C/T 2TB HDD ET7000 + ET6000 dvb-S OpenPli Triax 88 multifeed quad LNBs VU Uno4K SE C+2TB HDD Mutant HD60
Re: OpenPLi 3.0 issues (Openwebif and AC3 Sound) #7
Posted 6 November 2012 - 10:54
I am reporting here two issues with a freshly installed OpenPLi 3.0 (version dated last Sunday 110412) on my Xtrend ET9200. I did not recover any settings via Backup, just my channel settings with Dreamboxedit.
I came from the last OpenPLi 2.1. from 0924, which did not show any of the following issues:
1. Openwebif:
I received the following error message in my browser (latest Firefox on Windows 7, same on my Android tablet): 404 page not found (/cgi-bin/Home.sh)
After switching the Openwebif settings from Port 80 to Port 81 everything worked fine.
2. AC3 Sound:
No sound after wakeup from Standby (also Deep Standby), when AC3/DTS Downmix is set to off and AC3 sound track is activated (AC3 is preffered track in my language settings).
No sound when I zap from a channel with mpeg track to a channel with AC3 track. AC3/DTS Downmix in AV settings is always off!
After switching "Yellow button -> AC3/DTS Downmix" on and off sound with AC3 track is available again.
No problems, when AC3/DTS Downmix is generally set to on.
Please forget the Openwebif port issue, I think my browsers got confused since I access another box with the same IP-Address through a ssh tunnel.
I apologize for creating any confusion about this.
Concerning the AC3 issue: which, do you think, is the last version of OpenPLi, which is not suffering from this problem? Maybe i can go back to this, until it is solved in newer versions!
Re: OpenPLi 3.0 issues (Openwebif and AC3 Sound) #8
Posted 6 November 2012 - 16:13
Re: OpenPLi 3.0 issues (Openwebif and AC3 Sound) #9
Posted 6 November 2012 - 18:55
AC3/DTS Downmix is off
When zapping from some channel with mpeg to some with AC3 there is no sound. Zapping to some other channel with ac3 or switch on/off downmix
brings the sound back.. Then to some channel with mpeg -- sound is ok .. Then back to channel with ac3 -> no sound
Edited by mblum11, 6 November 2012 - 18:58.
Re: OpenPLi 3.0 issues (Openwebif and AC3 Sound) #10
Re: OpenPLi 3.0 issues (Openwebif and AC3 Sound) #11
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users