10 replies to this topic

[ds365]

I am reporting here two issues with a freshly installed OpenPLi 3.0 (version dated last Sunday 110412) on my Xtrend ET9200. I did not recover any settings via Backup, just my channel settings with Dreamboxedit.
I came from the last OpenPLi 2.1. from 0924, which did not show any of the following issues:

1. Openwebif:
I received the following error message in my browser (latest Firefox on Windows 7, same on my Android tablet): 404 page not found (/cgi-bin/Home.sh)
After switching the Openwebif settings from Port 80 to Port 81 everything worked fine.

2. AC3 Sound:
No sound after wakeup from Standby (also Deep Standby), when AC3/DTS Downmix is set to off and AC3 sound track is activated (AC3 is preffered track in my language settings).
No sound when I zap from a channel with mpeg track to a channel with AC3 track. AC3/DTS Downmix in AV settings is always off!
After switching "Yellow button -> AC3/DTS Downmix" on and off sound with AC3 track is available again.
No problems, when AC3/DTS Downmix is generally set to on.

[littlesat]

I had yesterday also issues with AC3.... sometimes but not always after a ZAP the AC3 sound was not hearable....

[veskop]

I had yesterday also issues with AC3.... sometimes but not always after a ZAP the AC3 sound was not hearable....

If you are "coming" from ac3 channel to ac3 channels,sound is hearable,or switch between cnannels with ac3-no problem.I solve problem,if I turn on/off downmix.

[littlesat]

I updated my samsung surround set last weekend... before I did not have any issues. In our commits I see nothing related....

[veskop]

I updated my samsung surround set last weekend... before I did not have any issues. In our commits I see nothing related....

yes,but problem is here :)I didnt touch anytihing,yesterday make a clean install and the same situation ....

[metoo]

yesterday same experience here, after normal daily updates, so no new flash
toslink from box to home cinema, downmix off.
i get rid of it with switch between next channel with ac3 and back

Edited by metoo, 6 November 2012 - 10:23.

[ds365]

I am reporting here two issues with a freshly installed OpenPLi 3.0 (version dated last Sunday 110412) on my Xtrend ET9200. I did not recover any settings via Backup, just my channel settings with Dreamboxedit.
I came from the last OpenPLi 2.1. from 0924, which did not show any of the following issues:

1. Openwebif:
I received the following error message in my browser (latest Firefox on Windows 7, same on my Android tablet): 404 page not found (/cgi-bin/Home.sh)
After switching the Openwebif settings from Port 80 to Port 81 everything worked fine.

2. AC3 Sound:
No sound after wakeup from Standby (also Deep Standby), when AC3/DTS Downmix is set to off and AC3 sound track is activated (AC3 is preffered track in my language settings).
No sound when I zap from a channel with mpeg track to a channel with AC3 track. AC3/DTS Downmix in AV settings is always off!
After switching "Yellow button -> AC3/DTS Downmix" on and off sound with AC3 track is available again.
No problems, when AC3/DTS Downmix is generally set to on.

Please forget the Openwebif port issue, I think my browsers got confused since I access another box with the same IP-Address through a ssh tunnel.
I apologize for creating any confusion about this.

Concerning the AC3 issue: which, do you think, is the last version of OpenPLi, which is not suffering from this problem? Maybe i can go back to this, until it is solved in newer versions!

[jedeje]

Also reported in the German section: http://openpli.org/f...io-nach-update/ .

[mblum11]

Problem with AC3 here too.

AC3/DTS Downmix is off

When zapping from some channel with mpeg to some with AC3 there is no sound. Zapping to some other channel with ac3 or switch on/off downmix
brings the sound back.. Then to some channel with mpeg -- sound is ok .. Then back to channel with ac3 -> no sound

Edited by mblum11, 6 November 2012 - 18:58.

[hemertje]

update & try again...

[metoo]

its ok, thank you very much