Posted 29 November 2014 - 22:49
Both mgcamd and oscam-ymod-full-log work for most channels.
Twice in the past few days BBC News has been viewable but only with mgcamd.
BBC Red Button often requires encouragement by restarting mgcamd, then switching to BBC One HD, then back to BBC RB.
XL8tor
BBC News did not work with both of them.
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 29 November 2014 - 22:57
Ok, did work with mgcamd, but only after Enigma reboot.
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 30 November 2014 - 07:25
Good tip Micky!
I selected BBC News, then restarted Enigma; it worked, but only three times in five trys.
XL8tor
Two VU+ Unos with OpenPLI - 80cm Astra 19.2 + Hotbird 13.0 - 100cm Astra 28.2 (No BBC) - 110cm Intelsat 907
South of Lake Chiemsee, Bavaria, Germany, Europe
Posted 30 November 2014 - 10:22
Yup! good tip indeed.
Works for me, how come? what is not working corectly in the image? or is it a hardware issue?
Posted 30 November 2014 - 11:54
I downgrade to Openpli 4, Kernal Version 3.1.1 and Enigma 2014-08-15. Same result as with the new Openpli. All BBC channels are working, without BBC News. What is the reason?
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 30 November 2014 - 19:47
Micky, there are no developers working on any 27.5W issues here. Doublet was the guy who created the script but I guess noone else is even trying to make out the various tricks the satellite provider is using in their stream.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 30 November 2014 - 21:49
Micky, there are no developers working on any 27.5W issues here. Doublet was the guy who created the script but I guess noone else is even trying to make out the various tricks the satellite provider is using in their stream.
Thanks for your answer. I'm wondering because I test it with the newest Openpli and one from August 2014 too. I have make a downgrade. But BBC News did not work.The trick with mgcamd works only one time.
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 1 December 2014 - 07:04
I'm using OpenRSi 4.1 which is based on OpenPLi and since the latest key change have the same issue as many of you of no BBC News. I have found that when I select BBC News there is sound of the newscaster for a fraction of a second and then nothing. Indeed it seems like something in the script needs to be tweeked. Unfortunately my skills haven't developed that far yet. Is anyone able to contact Doublet re this?
Gigablue Quad using 4 tuners, OpenPLi 7, Prodelin 2.4mtr dish with Invacom C120 Quad LNB on 27.5W, 1mt std dish on 30W. 
VU+ Duo 4K, Openvix 5.2
Octagon SF8, Openvix 5.1 - neat piece of kit for the price! 
Posted 1 December 2014 - 12:42
I am still not sure if it is a 'script' problem.
out of 5 tries at BBC News, I get 3 picture only and 2 sound only!
by the way has radio 3 gone also?
Posted 1 December 2014 - 13:57
I am still not sure if it is a 'script' problem.
out of 5 tries at BBC News, I get 3 picture only and 2 sound only!
by the way has radio 3 gone also?
Oh, only so few tries? I think I make 40 tries. One time it works. But I don't know why. Which version of cam did you use?
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 1 December 2014 - 16:18
Is it easier to use a:
Technomate TM-5402 HD Super CI+ LAN USB PVR FULL 1080P
I read that it is possible to type in the correct pids. Can someone confirm this?
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 1 December 2014 - 17:23
Micky,
I use oscam ymod 18t-50 and the Technomate 5402 is the box I have heard works with 907
Posted 1 December 2014 - 18:06
Try selecting BBC News then do a manual scan for 907 and then select the BBC News channel from the discovered list. Works quite well for me in that the channel appears 1 out of 2-3 times and is quicker than a reboot.
Vix Apollo 070 on Octagon SF8 using Oscam ymod1853 Rev. 0
Posted 1 December 2014 - 19:24
Micky,
I use oscam ymod 18t-50 and the Technomate 5402 is the box I have heard works with 907
Thank you very much for the informations.
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 1 December 2014 - 19:24
Try selecting BBC News then do a manual scan for 907 and then select the BBC News channel from the discovered list. Works quite well for me in that the channel appears 1 out of 2-3 times and is quicker than a reboot.
Vix Apollo 070 on Octagon SF8 using Oscam ymod1853 Rev. 0
Did not work for me.
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 1 December 2014 - 19:46
Hi all. I have a TM-Nano2 Super and TM-5402 m3 (None Linux) and it's just a case loading a Patch and entering the correct B*ss code. Perfect picture and sound on all at 27.5w. To get round the BBC News problem (pli 3 with 4D) what i did was go in to softcam manager and set auto change camd. I set BBC News to auto change from default to mgcamd. Picture and sound every time. It seams like something triggers when it changes. Much quicker than reboot. Hope this helps. Could probably set it to same default cam if needed and it would just restart the cam (Trigger). Will check later.
Posted 1 December 2014 - 21:18
Thanks.
I think it is easier with TM-5402 M3 as with Vu+Solo.
Yes, I have the same configuration for BBC News as you wrote. But no success. Only in a very few cases.
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 1 December 2014 - 23:30
The TM-5402m3 is 10 min setup start to finish but the TM-Nano2 Super is Linux e2 4D and very similar to VU (Pain in the but).
Posted 2 December 2014 - 14:28
The TM-5402m3 is 10 min setup start to finish but the TM-Nano2 Super is Linux e2 4D and very similar to VU (Pain in the but).
What did you mean with: Pain in the but?
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 2 December 2014 - 17:11
Micky I think he meant butt with double-t. It's as if he's refering to the discomfort of hemorrhoids.
Two VU+ Unos with OpenPLI - 80cm Astra 19.2 + Hotbird 13.0 - 100cm Astra 28.2 (No BBC) - 110cm Intelsat 907
South of Lake Chiemsee, Bavaria, Germany, Europe
0 members, 11 guests, 0 anonymous users
