1943 replies to this topic

[lacierva]

is a vu zero box capable of decoding this sat with the same method as the vusolo2 ?? using the openpli 6.1 release ??

Edited by lacierva, 15 January 2018 - 19:34.

[nml]

is a vu zero box capable of decoding this sat with the same method as the vusolo2 ?? using the openpli 6.1 release ??

Yes I have a Zero and solo 2 working fine.

[lacierva]

 

is a vu zero box capable of decoding this sat with the same method as the vusolo2 ?? using the openpli 6.1 release ??

Yes I have a Zero and solo 2 working fine.

 

thanks for the quick reply nml  , will get onto it as soon as zero arrives, i have it up and running on a solo2 but was not sure about the zero

[openpli4k]

I have an ultimo 4k with OpenATV 6.2.  Decoding BBC channels works, but HD channels have no sound. What could be the reason? (Previously it was good with stream relay and OpenATV 6.0.)

[lacierva]

 

is a vu zero box capable of decoding this sat with the same method as the vusolo2 ?? using the openpli 6.1 release ??

Yes I have a Zero and solo 2 working fine.

 

@mml  can you confirm you have the radio channels open on the zero ? cant seem to grt them open even with edited lamedb

[lacierva]

 

 

is a vu zero box capable of decoding this sat with the same method as the vusolo2 ?? using the openpli 6.1 release ??

Yes I have a Zero and solo 2 working fine.

 

@mml  can you confirm you have the radio channels open on the zero ? cant seem to grt them open even with edited lamedb

 

solved with the missing softcam entries

[openpli4k]

I have an ultimo 4k with OpenATV 6.2.  Decoding BBC channels works, but HD channels have no sound. What could be the reason? (Previously it was good with stream relay and OpenATV 6.0.)

The lamedb file was bad.

[zikofcb10]

BBC Four HD

STV HD

UTV HD

Red But.

RB 0

Not Working 

[Gaston64]

This thread seems it will never die

 

I've had 27.5w running fine for years. I now made a software update on my vuduo2 openpli4 after not having done so for over year, probably 1.5 years ago. And 27.5w stopped working...

 

Going back to old backup makes it work again and I have tried moving old lamedb (deleted lamedb5 in current install), old dvbsnoop, old oscam-config etc etc. Nothing makes it kick in again.

 

 

Log (BBC One HD):

 

capmtType: long, demux: /dev/dvb/adapter0/demux0
currentSid: 0x4484
trying with demux /dev/dvb/adapter0/demux0
Error(145): read (PID 0x0000): Connection timed out
currentSid: 0x4484
trying with demux /dev/dvb/adapter0/demux0
Error(145): read (PID 0x0000): Connection timed out

I have narrowed it down to the timeout being in the os.popen-line in the script below, the dvbsnoop command

 

	# check SID
	print "trying with demux %s" % demux
	pipe = os.popen("dvbsnoop -timeout %d -nph -pd 3 -n 1 -demux %s 0x0 | grep -A 1 %s | grep Program_map_PID" % (timeout,demux,currentSid))
	m = re.search(r"\((\w+)\)", pipe.readline())
	if not m:
		oldSid = "0x" # try to get PAT again in next iteration of main loop
		continue

What can have changed in openpli to make it stop working?

[Robinson]

What is your box?

"A" entries in oscam.dvbapi?

Softcam keys?

What does oscam log say?

 

By the way, if you are using a genuine OpenPLi image, you do not need doublet's script any more, at least on PLi 6 but PLi 4 probably the same.

[Gaston64]

Box: Vuplus Duo2

 

Yes, A-lines in oscam.dvbapi:

 

A:::4484:19c8::: 2600:000000:1FFF # BBC One HD

 

Oscam log:

 

2018/02/11 08:55:29 32E75DC5 c   (dvbapi) Demuxer 0 ecmpid 0 CAID: 2600 ECM_PID: 1FFF PROVID: 000000 
2018/02/11 08:55:29 32E75DC5 c   (dvbapi) Demuxer 0 found 1 ECMpids and 3 STREAMpids in caPMT
2018/02/11 08:55:29 32E75DC5 c   (dvbapi) Demuxer 0 found channel in cache and matching prio -> start descrambling ecmpid 0 
2018/02/11 08:55:29 32E75DC5 c   (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 2600 PROVID 000000 ECMPID 1FFF ANY CHID PMTPID 0000 VPID 19C9
2018/02/11 08:55:29 435324D5 p  (constcw) Searching CW for CAID 2600 PROVID 000000 SRVID 4484 ECMPID 1FFF PMTPID 0000 VPID 19C9
2018/02/11 08:55:29 435324D5 p  (constcw) Entry found: 2600@000000:4484:19C8:1FFF:0000:<removed>
2018/02/11 08:55:29 32E75DC5 c      (ecm) dvbapiau (2600@000000/0000/4484/0B:<removed>): found (3 ms) by const

I was not aware the scripts aren't needed in PLi6. I had updated my other box, will probably have a go at this as well then when I get the time. The scripts were one reason an upgrade would be somewhat of a bother and made me wait.

Edited by Gaston64, 11 February 2018 - 09:06.

[Gaston64]

Upgrading to 6.1 made the trick. No scripts, no dvbsnoop (atleast manually installed) needed. Must have been scripts conflicting with never PLI-versions.

[dog-man]

So, do we have to do anything at all except for having right keys on 6.1 to get the channels on 27.5W?

[Robinson]

We also need right lamedb, which you probably already have.

[lacierva]

i didnt realise i didnt need the scripts with 6.1 on a vuzero, so i added them anyway with no conflicting problems, all runs ok

[dog-man]

Which lamedb for VU Ultimo 4K?

[Robinson]

i didnt realise i didnt need the scripts with 6.1 on a vuzero, so i added them anyway with no conflicting problems, all runs ok

Can you watch one channel and at the same time record a different onefrom 27.5W?

[Gaston64]

 

i didnt realise i didnt need the scripts with 6.1 on a vuzero, so i added them anyway with no conflicting problems, all runs ok

Can you watch one channel and at the same time record a different onefrom 27.5W?

 

I can watch one and stream another, so should work.

Edited by Gaston64, 12 February 2018 - 21:37.

[Gaston64]

Which lamedb for VU Ultimo 4K?

https://forums.openp...ndpost&p=791234

[Robinson]

 

 

i didnt realise i didnt need the scripts with 6.1 on a vuzero, so i added them anyway with no conflicting problems, all runs ok

Can you watch one channel and at the same time record a different onefrom 27.5W?

 

I can watch one and stream another, so should work.

 

It would not be possible with the script itself.