Jump to content


Photo

Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge


  • Please log in to reply
1897 replies to this topic

Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1641 sleepy

  • Senior Member
  • 45 posts

0
Neutral

Posted 9 February 2021 - 13:50

Also in my place in Italy, signal seems to have decreased. I cannot give the figure in dB, since my OpenPLI in a GigaBlue insists on giving me only the %, whatever I try and set, but I am down to 55% from 65% in clear sky and dangerously down to 45-48% in downpours. Margins have reduced a lot. 1.8 m Channel Master. Sleepy

Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1642 twol

  • Senior Member
  • 442 posts

+15
Neutral

Posted 10 February 2021 - 20:20

We have cloud cover at the moment(snowing) but still reading 11.0 dB (70%) and haven‘t noticed much difference over the months 90cm dish in  Southern Bavaria, Germany attached to GigaBlue UHD 4K


Edited by twol, 10 February 2021 - 20:20.

Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1643 pecorazza

  • Senior Member
  • 99 posts

0
Neutral

Posted 11 February 2021 - 11:13

Maybe the signal is reduced only at the edges of the beam.

In Italy I noticed a further but smaller reduction of the signal

Veneto region - close to Venice



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1644 jpuigs

  • Senior Member
  • 1,143 posts

+32
Good

Posted 11 February 2021 - 17:49

In North Spain signal has decreased, S/N dB from 10.5 to 8.5


Enigma is getting old....

 

Spoiler

Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1645 fcgd

  • New Member
  • 4 posts

0
Neutral

Posted 14 February 2021 - 00:12

Ive noticed that here in Stockholm too. With Triax TD65 65 cm antenna, 11495 V was 8.6dB, it went down to 7,3dB - 7.7dB

 

One of my strongest signals on this bird is/was 11608 V (Icelandic TVs) i had 11.8dB -12,2dB. And now i get 8.0dB - 8-5dB.

 

i havent tested with my other antennas. Ill try a Selfsat 50D4 next weekend but i do expect similar numbers. 



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1646 dog-man

  • Senior Member
  • 394 posts

+2
Neutral

Posted 23 February 2021 - 13:28

Could somebody provide an up to date LameDB please.

I think it's about time I tried to get this working on my receiver.



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1647 Maneto

  • New Member
  • 2 posts

0
Neutral

Posted 10 March 2021 - 14:34

Search Re: Enigma2 and BBC / ITV at 27.5 W Intelsat - big challenge # 1601
There you have a file.zip


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1648 dog-man

  • Senior Member
  • 394 posts

+2
Neutral

Posted 10 March 2021 - 14:44

 

Search Re: Enigma2 and BBC / ITV at 27.5 W Intelsat - big challenge # 1601
There you have a file.zip

 

Thank You.



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1649 bitje

  • Member
  • 5 posts

0
Neutral

Posted 1 April 2021 - 09:03

Goodday,....

 

If i understand you need only by openpli ( ihave 8.3 and running oscam-emu) the lamedb and softcam.key

when i download the channels not a lot works,...

This is my log

 

  • 2021/04/01 10:07:30 00000000 s (main) Host name = lunix4k
  • 2021/04/01 10:07:30 00000000 s (main) Release = 4.1.20
  • 2021/04/01 10:07:30 00000000 s (main) Version = #1 SMP Fri Dec 25 04:34:38 UTC 2020
  • 2021/04/01 10:07:30 00000000 s (main) Machine = armv7l
  • 2021/04/01 10:07:30 00000000 s (main) Stb model = dm8000
  • 2021/04/01 10:07:30 00000000 s (main) Stb vumodel = vuuno4k
  • 2021/04/01 10:07:30 00000000 s (main) Stb boxtype = dm8000
  • 2021/04/01 10:07:30 00000000 s (main) creating pidfile /tmp/oscam-emu.pid with pid 2812
  • 2021/04/01 10:07:30 00000000 s (emu) OSCam-Emu version 798
  • 2021/04/01 10:07:30 00000000 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
  • 2021/04/01 10:07:30 00000000 s (main) signal handling initialized
  • 2021/04/01 10:07:30 00000000 s (config) 10 provid's loaded
  • 2021/04/01 10:07:30 00000000 s (config) 164 service-id's loaded in 0 ms
  • 2021/04/01 10:07:30 00000000 s (net) cs378x: initialized (fd=3, port=12005)
  • 2021/04/01 10:07:30 00000000 s (reader) lower_card [internal] creating thread for device /dev/sci0
  • 2021/04/01 10:07:30 00000000 s (reader) emulator [emu] creating thread for device emulator
  • 2021/04/01 10:07:30 00000000 s (main) waiting for local card init
  • 2021/04/01 10:07:30 0EF0621F r (emu) Stream key delayer initialized
  • 2021/04/01 10:07:30 0EF0621F r (emu) Stream relay server initialized
  • 2021/04/01 10:07:30 0EF0621F r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
  • 2021/04/01 10:07:30 3A8E8341 r (reader) lower_card [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz)
  • 2021/04/01 10:07:30 3A8E8341 r (reader) lower_card [internal] Reader sci internal, detected box type: dm8000
  • 2021/04/01 10:07:30 00000000 (emu) INFO: FFDecsa parallel mode = 32
  • 2021/04/01 10:07:30 62DFD210 h (webif) webif: decompressed 176175 bytes back into 425256 bytes
  • 2021/04/01 10:07:30 62DFD210 h (webif) HTTP Server running. ip=:: port=8081
  • 2021/04/01 10:07:31 0EF0621F r (reader) emulator [emu] card detected
  • 2021/04/01 10:07:32 0EF0621F r (reader) emulator [emu] found card system emu
  • 2021/04/01 10:07:32 0EF0621F r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
  • 2021/04/01 10:07:32 0EF0621F r (emu) Reading key file: /etc/tuxbox/config/oscam-emu/SoftCam.Key
  • 2021/04/01 10:07:32 0EF0621F r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:30 G:0 P:0 T:0 A:0
  • 2021/04/01 10:07:32 00000000 s (main) init for all local cards done
  • 2021/04/01 10:07:32 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
  • 2021/04/01 10:07:32 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
  • 2021/04/01 10:07:32 196BB19D c (client) plain dvbapi-client granted (dvbapiau, au=auto (6 reader))
  • 2021/04/01 10:07:32 196BB19D c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache
  • 2021/04/01 10:07:32 196BB19D c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 64 (oscam limit is 64)
  • 2021/04/01 10:07:32 196BB19D c (dvbapi) PMT mode 6: Connecting to enigma CA PMT listen socket...
  • 2021/04/01 10:07:32 196BB19D c (dvbapi) PMT mode 6: Successfully connected to CA PMT server (fd 11)


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1650 twol

  • Senior Member
  • 442 posts

+15
Neutral

Posted 1 April 2021 - 12:57

Provided you have the modified lamedb and using the key correctly in Oscam, then basically Yes


Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1651 bitje

  • Member
  • 5 posts

0
Neutral

Posted 8 April 2021 - 14:36

Ok have found the problem,... in this line i have to change from F4 to F5

can anybody explane why ?

 

for example 

 

Channel 5 HD
p:BBC,c:001901,c:031901,c:050001, c:121902,C:2600,f:4         has to be f:5
4680:0cfdace7:1000:0001:25:0:0


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1652 twol

  • Senior Member
  • 442 posts

+15
Neutral

Posted 9 April 2021 - 15:53

 

Ok have found the problem,... in this line i have to change from F4 to F5

can anybody explane why ?

 

for example 

 

Channel 5 HD
p:BBC,c:001901,c:031901,c:050001, c:121902,C:2600,f:4         has to be f:5
4680:0cfdace7:1000:0001:25:0:0

 

I have:
p:BBC,c:001901,c:031901,c:121902,c:050001,C:2600,f:400,f:05
4680:0cfdace7:1000:0001:25:0


Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1653 Micky

  • Senior Member
  • 162 posts

0
Neutral

Posted 15 April 2021 - 21:38

What is with these channels? They did not work:

BBC Scotland
BBC RB 0
BBC Scotland HD
Channel 5 HD
BBC Four HD
TBN UK
Shopping Quarter

I use a Technomate TM-5402HD CI+ receiver.

Thanks!


Micky
 


Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's:  Inverto Black Ultra, MEGASAT HD Profi Twin,  2 x Rotor Jaeger Sat SG 2500


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1654 teleradio

  • Senior Member
  • 123 posts

0
Neutral

Posted 23 April 2021 - 21:40

Hello!

 

The sound on the BBC HD channels has gone since a few days, while on all BBC SD Channels both picture ans sound are still working. Does anyone know whether the PCR settings have been changed for the HD channels?



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1655 Frenske

  • Forum Moderator
    PLi® Core member
  • 27,380 posts

+393
Excellent

Posted 23 April 2021 - 22:12

Just checked on a random receiver on several BBC HD channels. No issues seen or heard. ;)

 

 

Attached Files


Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.

Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. ;) :)
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.

Voor centrale opslag van media gebruik ik een Qnap 219P 
met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.

-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".

Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1656 twol

  • Senior Member
  • 442 posts

+15
Neutral

Posted 24 April 2021 - 07:17

Works fine for me - I use the HD channels every day


Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1657 BBC-Hörer

  • Senior Member
  • 53 posts

+2
Neutral

Posted 24 April 2021 - 09:19

Hello!

 

The sound on the BBC HD channels has gone since a few days, while on all BBC SD Channels both picture ans sound are still working. Does anyone know whether the PCR settings have been changed for the HD channels?

It might happened that you pressed the audio - button? I believe to remember that this might change the channel setting..
So easily write your backup settings with dreamboxedit onto your receiver.


T90: 42°E..4,9°E; CAS09: 7°E+4°W; Gibertini 125:27,5°W, 30°W
SF4008 with SDG-5
HD51 with OpenPli 6.0

 


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1658 teleradio

  • Senior Member
  • 123 posts

0
Neutral

Posted 24 April 2021 - 20:26

Just checked on a random receiver on several BBC HD channels. No issues seen or heard. ;)

Hello!

 

The sound on the BBC HD channels on "SAT 27.5W" has gone since a few days, while on all BBC SD Channels both picture ans sound are still working. Does anyone know whether the PCR settings have been changed for the HD channels?



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1659 twol

  • Senior Member
  • 442 posts

+15
Neutral

Posted 24 April 2021 - 21:10

I am using same settings since last year - not sure what dish you have but maybe its moved slightly? On my 90cm dish its a really tight beam,


Gigablue Quad 4K & UE 4K
.........FBC Tuners:
------------------> DUR-Line DCR 5-1-8-L4 Multiswitch to 1.5M dish(28.2E)
------------------> Spaun SUS 5581/33 NFA Multiswitch to 80 cm dish(19.2E)
.........DVB-S2X into 90cm dish (27.5W)

Octagon sf8008, AX HD61, Edision Osmio 4K+, Zgemma H9Combo using Legacy ports on multiswitches
Zgemma H9twin & Zgemma H9 C/S mode into Giga4K
 


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #1660 teleradio

  • Senior Member
  • 123 posts

0
Neutral

Posted 24 April 2021 - 21:55

I am using same settings since last year - not sure what dish you have but maybe its moved slightly? On my 90cm dish its a really tight beam,

 

 

 

Just checked on a random receiver on several BBC HD channels. No issues seen or heard. ;)

Hello!

 

The sound on the BBC HD channels on "SAT 27.5W" has gone since a few days, while on all BBC SD Channels both picture ans sound are still working. Does anyone know whether the PCR settings have been changed for the HD channels?

 

 

PLEASE NOTE I'M TALKING ABOUT  INTELSAT SATELLITE  on 27,5°W!!! NOT 28,2° E




2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users