1942 replies to this topic

[humaxboy]

If you have VU+, then I suspect you may have to use LONG mode of doublet's script and you will not be able to hear audio on HD channels.

 

I can't get it to run ..

Questions :

1.how can i see that doublet's script is actually running on the system ?

2.do you need to set "f:4" flag for doublet's script ? If I understod things, the answer is no.

3. what is the first thing I can check after i know that the script is running ?

 

Humaxboy

 

[doublet]

If you have VU+, then I suspect you may have to use LONG mode of doublet's script and you will not be able to hear audio on HD channels.

 

I can't get it to run ..

Questions :

1.how can i see that doublet's script is actually running on the system ?

2.do you need to set "f:4" flag for doublet's script ? If I understod things, the answer is no.

3. what is the first thing I can check after i know that the script is running ?

 

Humaxboy

 

 

Hi,

first,  there is one basic prerequisite:

You need some softcam which is able to handle BISS and BISS keys (script was tested with oscam ymod).

 

For first experiments, it is good to run the py script by hand from command line. You could start the script in short mode (which is better but it is confirmed to work properly on dreambox only). Another variable is demux number - I believe demux0 is to be used with OpenPLI images, but you have to check.

"f:4" and correct PIDs in lamedb are required for "long" mode.

 

If you have already installed py script with starter scripts, you can check whether it is running by linux ps command.

[Robinson]

Just an observation when using LONG mode of the script on my ET9000.

It seems not to be possible to record these channels using timer - I tried BBC ONE.

Instant recording works fine.

 

And even if I record something using instant recording, it seems impossible to play such *.ts file on a Windows computer.

Has anyone tried that?

[Amai]

And even if I record something using instant recording, it seems impossible to play such *.ts file on a Windows computer.

Has anyone tried that?

 

Try MPC-BE (Media Player Classic - Black Edition) 

http://sourceforge.net/projects/mpcbe/

 

Files I can't play with WMP or VLC are playable with MPC-BE

[humaxboy]

 

If you have VU+, then I suspect you may have to use LONG mode of doublet's script and you will not be able to hear audio on HD channels.

 

I can't get it to run ..

Questions :

1.how can i see that doublet's script is actually running on the system ?

2.do you need to set "f:4" flag for doublet's script ? If I understod things, the answer is no.

3. what is the first thing I can check after i know that the script is running ?

 

Humaxboy

 

 

Hi,

first,  there is one basic prerequisite:

You need some softcam which is able to handle BISS and BISS keys (script was tested with oscam ymod).

 

For first experiments, it is good to run the py script by hand from command line. You could start the script in short mode (which is better but it is confirmed to work properly on dreambox only). Another variable is demux number - I believe demux0 is to be used with OpenPLI images, but you have to check.

"f:4" and correct PIDs in lamedb are required for "long" mode.

 

If you have already installed py script with starter scripts, you can check whether it is running by linux ps command.

 

softcam is ok, py script is running, see picture

 experiment.jpg   15.37KB   99 downloads

 

i've changed bbc_pmt_starter.sh to scriptName="bbc_pmt_v3.py -t long -d /dev/dvb/adapter0/demux0"

 

Can somebody help me with dvbsnoop command to see what is happening in the background ?

 

Humaxboy

[humaxboy]

It works guys ..tested on bbc two..to test other channels i have to check all the pids in the setiings..

Humaxboy

Attached Files

•  bbc_two_275W.jpg   47.87KB   95 downloads

Edited by Frenske, 6 November 2013 - 23:39.
Thesame request here. Please stop repeating the quotes. I removed them for now. Thanks.

[humaxboy]

final mail for today..all sd channels working, on HD channels no sound ...thanks for help !

Edited by Frenske, 6 November 2013 - 23:37.
No need to repeat all those quotes.

[doublet]

As Robinson mentioned earlier, perhaps you've got same problem as with ET receivers. To get sound on HD,script must run in short mode. In that mode script asks CAM do descramble PMT section. Till now it's confirmed to work properly on dreamboxes only.

You can run script in short mode by hand from cmd line (bbc_pmt_v3.py -t short -d /dev/dvb/adapter0/demux0) and post output. Alternatively, you can try to do it directly in bbc_pmt_starter.sh and catch a log:

 

scriptName="bbc_pmt_v3.py -t short -d /dev/dvb/adapter0/demux0"
#logName=/dev/null
logName=/tmp/bbc_pmt.log

[humaxboy]

As Robinson mentioned earlier, perhaps you've got same problem as with ET receivers. To get sound on HD,script must run in short mode. In that mode script asks CAM do descramble PMT section. Till now it's confirmed to work properly on dreamboxes only.

You can run script in short mode by hand from cmd line (bbc_pmt_v3.py -t short -d /dev/dvb/adapter0/demux0) and post output. Alternatively, you can try to do it directly in bbc_pmt_starter.sh and catch a log:

 

scriptName="bbc_pmt_v3.py -t short -d /dev/dvb/adapter0/demux0"
#logName=/dev/null
logName=/tmp/bbc_pmt.log

 

I'll try to test it in the evening..yesterday it was to late .

 

Humaxboy

[humaxboy]

No success with short...

 

one question - can somebody check lamedb data for BBC One HD, Channel 4 HD,ITV1 HD...especially for namespace which value is 0cfdace7 by me.is it true ? I can't decode HD channels with long or short method..

 

4484:0cfdace7:1000:0001:25:0
BBC One HD
p:BBC,c:0019c9,c:0119ca,c:0319c9,c:0919cd,C:2600,f:5,f:04

 

4500:0cfdace7:1000:0001:25:0
Channel 4 HD
p:BBC,c:00189d,c:01189e,c:03189d,c:0918a1,C:2600,f:5,f:04
 

44c8:0cfdace7:1000:0001:25:0
ITV1 HD
p:BBC,c:001839,c:01183a,c:031839,c:09183d,C:2600,f:5,f:04
 

[humaxboy]

Mystery, mystery - if I put c:050001 parameter in service section then HD channels are working, but no sound on long method.

 

44c8:0cfdace7:1000:0001:25:0
ITV1 HD
p:BBC,c:001839,c:01183a,c:031839,c:09183d,C:2600,f:5

44c8:0cfdace7:1000:0001:25:0
ITV1 HD
p:BBC,c:001839,c:01183a,c:031839,c:050001,c:09183d,C:2600,f:5,f:04

[Robinson]

humaxboy, look here: http://openpli.org/f...c/24768-lamedb/

[humaxboy]

Final result from me : vu+solo2 (just changed from vu+uno )..

SD all working with sound, HD only picture, no sound.

Using long method from doublet, short mode does not work.

 

Humaxboy

Attached Files

•  bbe_one_275W.jpg   59.74KB   74 downloads
•  itv_27,5W.jpg   49.64KB   73 downloads

[nakkipaketti]

Hi all, 

 

I've been following closely the conversation and done little experimenting on my own system, so here's what I've discovered.

 

I'm using Linux system, with vdr+dvbapi+oscam-ymod-t48 and I get all other channels to open, with sound (SD and HD), but not BBC Three, BBC Three HD, BBC Four, STV HD or UTV HD. Can someone confirm if these are working at all, and which vpid, apid they are using ?

 

One interesting thing is that I don't need to run any extrenal scripts to get the pmt decrypted. After vdr restart It takes some time (maybe 30-60s) for vdr to get hang of the pmt and to decrypt it, but eventually when it does, all channels (except above mentioned) are working after that without delay.

 

Nov 13 17:28:52 dvbs vdr: [22711] DVBAPI-Error: poll timed out

Nov 13 17:28:52 dvbs vdr: [22711] DVBAPI-Error: Error in read pmt

Nov 13 17:28:52 dvbs vdr: [22711] DVBAPI-Error: poll timed out

Nov 13 17:28:52 dvbs vdr: [22711] DVBAPI-Error: Error in read pmt

Nov 13 17:28:52 dvbs vdr: [22710] CAM 1: module ready

Nov 13 17:28:52 dvbs vdr: [22735] receiver on device 1 thread started (pid=22644, tid=22735, prio=high)

Nov 13 17:28:52 dvbs oscam: 1848 F6D5BB40 c dvbapi: [ADD PID 0] CAID: 2600#011ECM_PID: 1FFF#011PROVID: 000000

Nov 13 17:28:52 dvbs oscam: 1848 F6D5BB40 c dvbapi: new program number: 1044 (2600:1044 unknown)

Nov 13 17:28:52 dvbs vdr: [22736] TS buffer on device 1 thread started (pid=22644, tid=22736, prio=high)

Nov 13 17:28:53 dvbs oscam: 1848 F6D5BB40 c dvbapi: Start descrambling PID #0 (CAID: 2600) 1

Nov 13 17:28:53 dvbs oscam: 1848 F6D5BB40 c vdr (2600&000000/1044/1FFF/0000/03:0000/19-19): emu (200 ms)

 

 

Here's vdr -V output showing the vdr and plugin versions.

 

vdr (2.1.2/2.1.2) - The Video Disk Recorder

dvbapi (1.0.2) - DVBAPI type SOFTCAM

streamdev-server (0.6.0-git) - VDR Streaming Server

dvbsddevice (2.0.1) - SD Full Featured DVB device

dvbhddevice (2.1.2) - HD Full Featured DVB device

 

Hopefully this information helps someone to come up with better working solution on set-top boxes

[Robinson]

I'm using Linux system, with vdr+dvbapi+oscam-ymod-t48 and I get all other channels to open, with sound (SD and HD), but not BBC Three, BBC Three HD, BBC Four, STV HD or UTV HD. Can someone confirm if these are working at all, and which vpid, apid they are using ?

 

BBC 3 and BBC 4 are working only at certain times. Evenings? Nights? Something like that. The others you mentioned do not work because they in fact do not broadcast anything.

 

Thanks for sharing info on you VDR.

Is it something like that: http://rstenpresser....resser/vdr.html

[doublet]

BBC 3 and BBC4 are on air from 19.00 British time (20.00 CET). BBC 3 HD is expected going on air in December. STV HD or UTV HD don't broadcast any stream via this package.

 

So it's known, that it's E2 problem with scrambled PMT (which is quite out of standard). There are (few) non-E2 receivers which can deal with that. So you can be lucky that your VDR-based system can deal with scrambled PMT

[nakkipaketti]

Robinson: Something like that, but not as nice

 

doublet: Thanks for the info on channels! I understood minutes after I sent the message that VDR does know how to descramble the PMT, something that the E2 doesn't, hence the external script 

[Alex_NL]

When I install oscam-ymod-t48 it is not decoding anything, both my Canal Digitaal and Digitenne card are not working, I can't access the WebIF of Oscam.
With the normal Oscam it's working fine...
 

Can't find a specific installation- or setupguide for the ymod-version, so configuring it the same like the normal oscam.

 

What could I be doing wrong?

[MakSATer]

Hello to everyone!

 

I have VU+UNO, OpenPli 3.0, Oscam-ymod_18.t46

i installed dvbsnoop_0.0+cvs20081001-r1_mips32el.ipk

I downloaded script bbc_pmt_v3.py and i put it into /root/home/

I edited my lamedb, i deleted from base ",f:40"

I have tried to run script.

 

root@vuuno:~# ./bbc_pmt_v3.py -t short -d /dev/dvb/adapter0/demux0
capmtType: short, demux: /dev/dvb/adapter0/demux0
sh: wget: not found
sh: wget: not found
sh: wget: not found
sh: wget: not found
sh: wget: not found
sh: wget: not found
sh: wget: not found
 

 

Why i see it? Please, help me.

[Robinson]

Did you try LONG mode?

Did you try other demux numbers?