Jump to content


Photo

Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge


  • Please log in to reply
1943 replies to this topic

Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #681 hemertje

  • Forum Moderator
    PLi® Core member
  • 33,504 posts

+118
Excellent

Posted 8 October 2014 - 19:09

Ask at the openatv forum

on the Glassfibre 1GB DVB-C...


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #682 maxi

  • Senior Member
  • 66 posts

0
Neutral

Posted 8 October 2014 - 22:31

 

did you try install them from telnet ? 

 

with command opkg install dvbsnoop

yes, but it does not work

 

I have openatv 4.2 and work...

go to usr/bin and see if is there



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #683 nico-lone

  • Member
  • 4 posts

0
Neutral

Posted 9 October 2014 - 04:27

 

 

did you try install them from telnet ? 

 

with command opkg install dvbsnoop

yes, but it does not work

 

I have openatv 4.2 and work...

go to usr/bin and see if is there

 

dvbsnoop the file is in / usr / bin with 755 permissions. 
with command "dvbsnoop", the program responds, 
 
azboxhd root @: ~ # dvbsnoop 
dvbsnoop - a dvb / mpeg2 stream analyzer tool 
Version: 1.4.51 / api-3 (Jun 25 2013 16:20:18) 
          © 2001-2007 Rainer Scherg (rasc) 
                                                  
  but with other commands like "-s signal" or "-s pidscan" he says 
 
-------------------------------------------------- ------- 
Transponder / Frequency signal strength statistics ... 
-------------------------------------------------- ------- 
Error (122): frontend ioctl: Operation not supported 
cycle: 1 D_TIME: 0.001 s azboxhd root @: ~ #
 
so with all the new E2 images. 
decoder that you are using? 
I doubt it's a problem of azbox.


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #684 TBF

  • Member
  • 2 posts

0
Neutral

Posted 9 October 2014 - 16:16

Please if anybody knows how to unlock the BBC on 27.5W.
Reciver is VU+Solo2 Original.
 
I'm trying with OpenPLI-4.0-beta-vusolo2-20140928
But I do not manage to open any channel.

I have

1) VU+Solo2 Original.

2) Oscam Ymode with right 2 lines keys./MgCamd with right 2 lines keys

3) Open PLI from 28.09.14.

4) Files from bbc_pmt_v5.zip in usr/bin 755 attr.

5) dvbsnoop in in usr/bin 755 attr.

I have dark screen on BBC 27.5 W. PMT error...



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #685 maxi

  • Senior Member
  • 66 posts

0
Neutral

Posted 10 October 2014 - 08:59

You have to use (long mode) in bbc_pmt_v5.py -t long -d /dev/dvb/adapter0/demux0



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #686 maxi

  • Senior Member
  • 66 posts

0
Neutral

Posted 10 October 2014 - 09:03

 

 

 

did you try install them from telnet ? 

 

with command opkg install dvbsnoop

yes, but it does not work

 

I have openatv 4.2 and work...

go to usr/bin and see if is there

 

dvbsnoop the file is in / usr / bin with 755 permissions. 
with command "dvbsnoop", the program responds, 
 
azboxhd root @: ~ # dvbsnoop 
dvbsnoop - a dvb / mpeg2 stream analyzer tool 
Version: 1.4.51 / api-3 (Jun 25 2013 16:20:18) 
          © 2001-2007 Rainer Scherg (rasc) 
                                                  
  but with other commands like "-s signal" or "-s pidscan" he says 
 
-------------------------------------------------- ------- 
Transponder / Frequency signal strength statistics ... 
-------------------------------------------------- ------- 
Error (122): frontend ioctl: Operation not supported 
cycle: 1 D_TIME: 0.001 s azboxhd root @: ~ #
 
so with all the new E2 images. 
decoder that you are using? 
I doubt it's a problem of azbox.

 

In Azbox Me and MiniMe works very well, Azbox previous think not.



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #687 nico-lone

  • Member
  • 4 posts

0
Neutral

Posted 10 October 2014 - 16:46

that image?


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #688 maxi

  • Senior Member
  • 66 posts

0
Neutral

Posted 10 October 2014 - 17:46

OpenAtv 4.1 and 4.2



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #689 Robertooo

  • Senior Member
  • 287 posts

0
Neutral

Posted 12 October 2014 - 11:40

How did you record it? If you put the box to standby, recording stopped because you can only record these channels if they are on.

Box in standby = no recording

 

It's making video file because the file size is OK. For e.g I've recorded 1 hour from BBC One, it's about 5 GB but I can't play it on computer. With VU+ Solo2 it plays a segment of the video, not the whole video.



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #690 Robertooo

  • Senior Member
  • 287 posts

0
Neutral

Posted 12 October 2014 - 11:42

 

Please if anybody knows how to unlock the BBC on 27.5W.
Reciver is VU+Solo2 Original.
 
I'm trying with OpenPLI-4.0-beta-vusolo2-20140928
But I do not manage to open any channel.

I have

1) VU+Solo2 Original.

2) Oscam Ymode with right 2 lines keys./MgCamd with right 2 lines keys

3) Open PLI from 28.09.14.

4) Files from bbc_pmt_v5.zip in usr/bin 755 attr.

5) dvbsnoop in in usr/bin 755 attr.

I have dark screen on BBC 27.5 W. PMT error...

 

Have you got a correct oscam.keys file? I use oscam y mod v 7.51, it's working with it.

 

Have you changed your lame.db?


Edited by Robertooo, 12 October 2014 - 11:42.


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #691 kota

  • Senior Member
  • 89 posts

+1
Neutral

Posted 14 October 2014 - 17:57

your bbc pmt files are not correct for the Solo2.You need to edit the bbc_pmt_starter.sh this way.

#!/bin/sh

scriptName="bbc_pmt_v5.py -t long -d /dev/dvb/adapter0/demux0"
logName=/dev/null
#logName=/tmp/bbc_pmt.log

while [ 1 ]
do
	echo "=== starting $scriptName" >> $logName
	$scriptPath/$scriptName >> $logName 2>&1
	echo "=== $scriptName exited..." >> $logName
done


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #692 lnbr

  • Senior Member
  • 33 posts

0
Neutral

Posted 17 October 2014 - 07:52

Hi all!

 

I'm new to all this, I think i've read this topic thoroughly, but I still have black screen...

I'd be glad if some expert could give me a clue  :)

 

Here's what I have:

 

Solo2, Openpli4

Signal on 27.5W: not very strong, but locked 7.7, 7.9db 

Ymod 18-51 with oscam.keys

dvbsnoop running

file launched manually: "bbc_pmt_v5.py -t long -d /dev/dvb/adapter0/demux0"

 

lamedb for BBC ONE:

 

4484:0cfdace7:1000:0001:25:0

BBC One HD
p:BBC,c:0019c9,c:0319c9,c:050001,c:1219ca,f:4

 

Here's the oscam log I get for this channel:


Edited by Frenske, 17 October 2014 - 08:37.
Oscam Logfile removed as we do not support oscam. Please visit Streamboard concerning specific oscam help.


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #693 lnbr

  • Senior Member
  • 33 posts

0
Neutral

Posted 17 October 2014 - 16:01

Hi all!

 

I'm new to all this, I think i've read this topic thoroughly, but I still have black screen...

I'd be glad if some expert could give me a clue  :)

 

Here's what I have:

 

Solo2, Openpli4

Signal on 27.5W: not very strong, but locked 7.7, 7.9db 

Ymod 18-51 with oscam.keys

dvbsnoop running

file launched manually: "bbc_pmt_v5.py -t long -d /dev/dvb/adapter0/demux0"

 

lamedb for BBC ONE:

 

4484:0cfdace7:1000:0001:25:0

BBC One HD
p:BBC,c:0019c9,c:0319c9,c:050001,c:1219ca,f:4

 

Here's the oscam log I get for this channel:

 

Sorry for that, Frenske, I didn't intend to break the rules, but, without the log, I can't see how someone could help me!



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #694 lnbr

  • Senior Member
  • 33 posts

0
Neutral

Posted 18 October 2014 - 10:20

Solved! Many thanks to andres66 for being so helpful  ;)



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #695 radicaldoc

  • Senior Member
  • 46 posts

0
Neutral

Posted 18 October 2014 - 11:54

Solved! Many thanks to andres66 for being so helpful  ;)

Any clues for the rest of us reading this...???


VU+ Solo 4K .VU+ Solo 2 X 2 With OpenPLi 8.3 x 3 2 in use other a test bed Synology ds-118

ASUS NITRO AN517-52 .i7 1075h with GTX 1660 Ti

 

 


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #696 lnbr

  • Senior Member
  • 33 posts

0
Neutral

Posted 18 October 2014 - 17:56

Everything was OK (after reading all this topic again and again), but the B*SS k*ys weren't :wacko:



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #697 kamacnik1

  • Senior Member
  • 72 posts

0
Neutral

Posted 22 October 2014 - 15:23

Hi guys

is this couldt work on nemesis OE1.6 image

dream800HD se box



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #698 sm0xhr

  • Member
  • 2 posts

0
Neutral

Posted 23 October 2014 - 18:44

Hi 
 
Thanks for this great forum! I usually have very limited access to the forums because I never write something, well that's why I leave this message.
 
I have been interested getting the BBC 27.5 west working on a new 2014 new Sunray Clone DM800se, wifi, and with a BCM4505 tuner bought from dhgate.com.
Most of the BBC channels are working fine, although not all of them yet.  
 
This might others help getting the clone to work:
 
Use this nfi: OpenPLi-4.0-Sunray-SR4-sim2-ssl84d-full.nfi (OpenPLi 4.0 OE 2.0 Sunray sr4 triple tuner sim2 #ssl 84D backup by maumixio). This version has TSPanel.
 
After clean install, fix your network!
 
Afterwards start TSPanel, Addons, Linuxsat_support_Addons, Cams -OpenPLI, and install Oscam Ymod v18-t55. 
 
When ready start DCC 1.50 on your PC and run Telnet. Write: "Opkg install dvbsnoop" and install it.
 
See to it you have the bbc_pmt_v5.zip file and install the files into usr/bin using the FTP of DCC 1.50. I use the standard short and demux0 in bbc_pmt_starter.sh. Check if it is right, my box crashed when using demux3. All files installed got 755 attributes.
 
In etc/tuxbox/config/oscam-stable (all oscam files should go here) I only used the following files
 
oscam.conf
oscam.dvbapi
oscam.keys
oscam user
 
oscam.conf looks like this:
-------------------------------------------------------------------
[webif]
httpport = 8888
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
 
 [newcamd]
Key = 0102030405060708091011121314
Port = 34000@093E:000000
 
 [dvbapi]
 enabled = 1
boxtype = dreambox
user = dvbapi
au = 1
 
-------------------------------------------------------------------
oscam.user looks like this:
-------------------------------------------------------------------
[account]
user = dvbapi
group = 1
au = 1
 
-------------------------------------------------------------------
oscam.keys
This you have to fix this yourself with the right keys!!!
Got it from here, but I had to change the BBC key
-------------------------------------------------------------------
 
Restart the box and use oscam-ymod 
 
After installing all this I modified the lamedb (init4/init3) with all the information delivered from this forum.
Sadly I only got Parliament and 301 to work. 
 
I did a new channel search on 27.5 west and got all STANDARD settings back and got most BBC channels working
without any problem. Sound is fine, and subtitling is working. Recording I can't check, because I have no harddrive yet.
 
That's it, rock & roll. Please notice there is lots to improve here, but this is EXACTLY how I did it. Clone works.
 
Ed


Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #699 drjj

  • Member
  • 2 posts

0
Neutral

Posted 24 October 2014 - 18:02

Hello everyone ..  please help this is driving me crazy ..i have openpli , enigma2 and managed to get everything working ..  brilliant he says ... 

Touched 1 button on dcc and all gone ..

 

can i post something on here which someone can look at and see what i did wrong ..

 

I had oscamymod all  working ..

 all hd etc bbc the lot ...

 

below is oscam log ..

 

 

 

>> OSCam << ymod cardserver started at Fri Oct 24 18:34:11 2014
-------------------------------------------------------------------------------
2014/10/24 18:34:11 1855 77CA8000 s >> OSCam << ymod cardserver started, build #1855 (mipsel-tuxbox-linux)
2014/10/24 18:34:11 1855 77CA8000 s version=ymod, build #1855, system=mipsel-tuxbox-linux
2014/10/24 18:34:11 1855 77CA8000 s client max. idle=120 sec, debug level=0
2014/10/24 18:34:11 1855 77CA8000 s max. logsize=100 Kb
2014/10/24 18:34:11 1855 77CA8000 s client timeout=6000 ms, fallback timeout=3000 ms, fallbacks=1, cache delay=0 ms
2014/10/24 18:34:11 1855 77CA8000 s Cannot open file "/etc/tuxbox/config/oscam-stable/oscam.services" (errno=2)
2014/10/24 18:34:11 1855 77CA8000 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.server" (errno=2)

2014/10/24 18:34:11 1855 77CA8000 s Cannot open file "/etc/tuxbox/config/oscam-stable/oscam.user" (errno=2)
2014/10/24 18:34:11 1855 77CA8000 s No account found for dvbapi user `tuner` -> creating
2014/10/24 18:34:11 1855 77CA8000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/10/24 18:34:11 1855 77CA8000 s signal handling initialized (type=sysv)
2014/10/24 18:34:11 1855 77CA8000 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.srvid" (err=2), no service-id's loaded
2014/10/24 18:34:11 1855 77CA8000 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.tiers" (err=2), no tier-id's loaded
2014/10/24 18:34:11 1855 77CA8000 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.provid" (err=2), no provids's loaded
2014/10/24 18:34:11 1855 77CA8000 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.ird" (errno=2) irdeto guessing not loaded
2014/10/24 18:34:11 1855 77CA8000 s monitor: disabled
2014/10/24 18:34:11 1855 77CA8000 s camd33: disabled
2014/10/24 18:34:11 1855 77CA8000 s camd35: disabled
2014/10/24 18:34:11 1855 77CA8000 s cs378x: disabled
2014/10/24 18:34:11 1855 77CA8000 s newcamd: disabled
2014/10/24 18:34:11 1855 77CA8000 s cccam: disabled
2014/10/24 18:34:11 1855 77CA8000 s radegast: disabled
2014/10/24 18:34:11 1855 77CA8000 s http disabled
2014/10/24 18:34:11 1855 77CA8000 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/10/24 18:34:11 1855 77CA8000 s waiting for local card init
2014/10/24 18:34:11 1855 77CA8000 s init for all local cards done
2014/10/24 18:34:11 1855 77CA8000 s anti cascading disabled
2014/10/24 18:34:11 1855 779CB4A0 c plain dvbapi-client granted (tuner, au=off)
2014/10/24 18:34:11 1855 779CB4A0 c dvbapi: can't open priority file /etc/tuxbox/config/oscam-stable/oscam.dvbapi
2014/10/24 18:37:15 1855 77CA8000 s exit with signal 15
2014/10/24 18:37:15 1855 77CA8000 s cardserver down

 

thanks all .. jj



Re: Enigma2 and BBC/ITV at 27.5W Intelsat - a big challenge #700 drjj

  • Member
  • 2 posts

0
Neutral

Posted 24 October 2014 - 22:43

Hello everyone ..  please help this is driving me crazy ..i have openpli , enigma2 and managed to get everything working ..  brilliant he says ... 

Touched 1 button on dcc and all gone ..

 

can i post something on here which someone can look at and see what i did wrong ..

 

I had oscamymod all  working ..

 all hd etc bbc the lot ...

 

below is oscam log ..

 

 

 

>> OSCam << ymod cardserver started at Fri Oct 24 18:34:11 2014
-------------------------------------------------------------------------------
2014/10/24 18:34:11 1855 77CA8000 s >> OSCam << ymod cardserver started, build #1855 (mipsel-tuxbox-linux)
2014/10/24 18:34:11 1855 77CA8000 s version=ymod, build #1855, system=mipsel-tuxbox-linux
2014/10/24 18:34:11 1855 77CA8000 s client max. idle=120 sec, debug level=0
2014/10/24 18:34:11 1855 77CA8000 s max. logsize=100 Kb
2014/10/24 18:34:11 1855 77CA8000 s client timeout=6000 ms, fallback timeout=3000 ms, fallbacks=1, cache delay=0 ms
2014/10/24 18:34:11 1855 77CA8000 s Cannot open file "/etc/tuxbox/config/oscam-stable/oscam.services" (errno=2)
2014/10/24 18:34:11 1855 77CA8000 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.server" (errno=2)

2014/10/24 18:34:11 1855 77CA8000 s Cannot open file "/etc/tuxbox/config/oscam-stable/oscam.user" (errno=2)
2014/10/24 18:34:11 1855 77CA8000 s No account found for dvbapi user `tuner` -> creating
2014/10/24 18:34:11 1855 77CA8000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/10/24 18:34:11 1855 77CA8000 s signal handling initialized (type=sysv)
2014/10/24 18:34:11 1855 77CA8000 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.srvid" (err=2), no service-id's loaded
2014/10/24 18:34:11 1855 77CA8000 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.tiers" (err=2), no tier-id's loaded
2014/10/24 18:34:11 1855 77CA8000 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.provid" (err=2), no provids's loaded
2014/10/24 18:34:11 1855 77CA8000 s can't open file "/etc/tuxbox/config/oscam-stable/oscam.ird" (errno=2) irdeto guessing not loaded
2014/10/24 18:34:11 1855 77CA8000 s monitor: disabled
2014/10/24 18:34:11 1855 77CA8000 s camd33: disabled
2014/10/24 18:34:11 1855 77CA8000 s camd35: disabled
2014/10/24 18:34:11 1855 77CA8000 s cs378x: disabled
2014/10/24 18:34:11 1855 77CA8000 s newcamd: disabled
2014/10/24 18:34:11 1855 77CA8000 s cccam: disabled
2014/10/24 18:34:11 1855 77CA8000 s radegast: disabled
2014/10/24 18:34:11 1855 77CA8000 s http disabled
2014/10/24 18:34:11 1855 77CA8000 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/10/24 18:34:11 1855 77CA8000 s waiting for local card init
2014/10/24 18:34:11 1855 77CA8000 s init for all local cards done
2014/10/24 18:34:11 1855 77CA8000 s anti cascading disabled
2014/10/24 18:34:11 1855 779CB4A0 c plain dvbapi-client granted (tuner, au=off)
2014/10/24 18:34:11 1855 779CB4A0 c dvbapi: can't open priority file /etc/tuxbox/config/oscam-stable/oscam.dvbapi
2014/10/24 18:37:15 1855 77CA8000 s exit with signal 15
2014/10/24 18:37:15 1855 77CA8000 s cardserver down

 

thanks all .. jj

ive sorted my problems with a littlwe help from andress66 .. 

 

problem was in enigma2 start file in the /usr/bin ...  i had to add the v5 into /bbc_pmt_v5.py ..

 

all working fine ... 

 

vu solo

openpli  latest update

oscam_ymod

 

and hours of hair pulling ...




13 user(s) are reading this topic

0 members, 13 guests, 0 anonymous users