SID 20352 (4F80)
PCR I supose the same value as video.
Edited by jpuigs, 19 December 2014 - 20:52.
Posted 20 December 2014 - 02:48
Works with my Vu+ SOLO.
This is for lamedb:
4f80:0cfdace7:1000:0001:1:0
Film4+1
p:Channel 4,c:001d4d,c:011d4e,c:031d4d,c:121d4e,c:050001,c:091d510101,C:2600,f:04
This for oscam.kxx:
F 00014F801D4D 00 As the others ; FILM 4+1
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 20 December 2014 - 03:07
If this did not work, search lamedb for other film4+1 entries. To comment out make a # on the beginning of every Film4+1 line.
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 22 December 2014 - 11:30
Works for me too on a Gigablue Quad.
Also setting up a new Octagon SF8 which is very similar to the XP1000 but having to trawl through all the mode and demux combinations to see which works.
Anyone able to tell me the mode and demux would save me quite a bit of time.
Gigablue Quad using 4 tuners, OpenPLi 7, Prodelin 2.4mtr dish with Invacom C120 Quad LNB on 27.5W, 1mt std dish on 30W.
VU+ Duo 4K, Openvix 5.2
Octagon SF8, Openvix 5.1 - neat piece of kit for the price!
Posted 22 December 2014 - 19:11
And how...?
Posted 27 December 2014 - 13:47
Are 301, 302, BBC Alba, STV HD and UTV HD only Data Channels? Some say yes and some no. What is correct?
Micky
Opticum X406p from 2,8E - 41E, VU+ Solo from 0,8W - 30W, 2 x Dish Opticum LH-100 cm
Lnb's: Inverto Black Ultra, MEGASAT HD Profi Twin, 2 x Rotor Jaeger Sat SG 2500
Posted 28 December 2014 - 00:04
Can you please specify all PID's etc. for both these services?
I believe there used to be something called 303 too. Does it work?
I'm curious because this site does not specify and PID values for 302: http://pl.kingofsat.net/pos-27.5W.php
Edited by Robinson, 28 December 2014 - 00:09.
ET9000, OpenPLi 4.0, 13E, 19E
HD51, OpenPLi 6.2, 75E - 30W
Posted 28 December 2014 - 12:50
Guys,
sorry for not being here, I was too busy with other things and on my setup (DMM E2 with script in short mode) all is working stable.
Timeout mentioned in previous posts is used as argument to dvbsnoop to tell him how long he has to wait for particular section.
After zap is done, we are waiting for PAT section to obtain PMT PID number. When PAT is received, we try to receive PMT section to know whether PMT is scrambled or not. Reason for this is the fact, that in the past there were time periods when PMT was broadcast in clear.
To add more contol, I've made new version of script which doesn't check whether PMT is broadcast in clear. So you will never see that "timeout" in script's output, which was always seen and which indicated that PMT is scrambled. To have original behavior (i.e. check for PMT broadcast in clear), add -c option to command line.
To play with different timeout values, I've added -s option followed by timeout (in ms).
So to start script with PMT check (old behavior) and timeout of 100 ms in long mode:
bbc_pmt_v6.py -t long -d /dev/dvb/adapter0/demux3 -c -s 100
Adapt scriptName line in bbc_pmt_starter.sh according your needs.
bbc_pmt_v6.zip 2.32KB 404 downloads
Posted 28 December 2014 - 13:58
Can you please specify all PID's etc. for both these services?
I believe there used to be something called 303 too. Does it work?
I'm curious because this site does not specify and PID values for 302: http://pl.kingofsat.net/pos-27.5W.php
302 301 Red Button
VID 0x0385 (901d) " "
AUD 0x03b7 (951d) " "
TSID 0x1000 (4096d) " "
ONID 0x0001 (1d) " "
SID 0x1c40 (7232d) 0x1c00 (7168d) 0x1140 (4416d)
0 members, 13 guests, 0 anonymous users