Jump to content


Photo

groen scherm tijdens zappen


  • Please log in to reply
15 replies to this topic

#1 stevie

  • Member
  • 31 posts

0
Neutral

Posted 6 December 2012 - 00:25

tijdens het zappen kreeg ik een groen scherm weet iemand waar dat aan ligt ik post de crashlog even mee



<?xml version="1.0" encoding="utf-8"?>
<openpli>
<enigma2>
  <crashdate>wo dec  5 23:58:56 2012</crashdate>
  <compiledate>Sep 24 2012</compiledate>
  <contactemail>forum at www.openpli.org</contactemail>
  <!-- Please email this crashlog to above address -->
  <skin>PLi-HD/skin.xml</skin>
  <sourcedate>Sep 24 2012</sourcedate>
  <branch>(no branch)</branch>
  <rev></rev>
  <version>3.0.0</version>
</enigma2>
<image>
  <stbmodel>ultimo</stbmodel>
  <kernelversion>
   <![CDATA[
Linux vuultimo 3.1.1 #1 SMP Sun Sep 23 20:25:45 CEST 2012 mips GNU/Linux
]]>
  </kernelversion>
  <kernelcmdline>bmem=232M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync</kernelcmdline>
  <nimsockets>NIM Socket 0:</nimsockets>
  <imageversion>
   <!-- No such file or directory -->
  </imageversion>
  <imageissue>
   <![CDATA[
OpenEmbedded Linux %h
openpli 2.1 %h
]]>
  </imageissue>
</image>
<crashlogs>
  <enigma2crashlog>
   <![CDATA[
tvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
setValue 35
action ->  GlobalActions volumeDown
Setvolume: 30 30 (raw)
Setvolume: 45 45 (-1db)
setValue 30
action ->  GlobalActions volumeDown
Setvolume: 25 25 (raw)
Setvolume: 48 48 (-1db)
setValue 25
action ->  GlobalActions volumeDown
Setvolume: 20 20 (raw)
Setvolume: 51 51 (-1db)
setValue 20
action ->  GlobalActions volumeDown
Setvolume: 15 15 (raw)
Setvolume: 54 54 (-1db)
setValue 15
action ->  InfobarChannelSelection openServiceList
action ->  OkCancelActions ok
playing 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:C7:9:3E8:FFFF0000:0:0:0:
[eDVBCAService] free service 1:0:1:C7:9:3E8:FFFF0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
use cached_channel
stop release channel timer
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (04d9), and 1 audio stream(s) (04da), and the pcr pid is 04d9, and the text pid is ffffffff
decoder state: play, vpid=1241, apid=1242
DMX_SET_PES_FILTER(0x4d9) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x4da) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x4d9) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
[eDVBCAService] new service 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
PATready
use pmtpid 04d8 for service_id 008b
eventNewProgramInfo 0 0
have 1 video stream(s) (04d9), and 1 audio stream(s) (04da), and the pcr pid is 04d9, and the text pid is ffffffff
decoder state: play, vpid=1241, apid=1242
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
action ->  InfobarChannelSelection openServiceList
action ->  OkCancelActions ok
playing 1:0:1:36B1:E:3E8:FFFF0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
[eDVBCAService] free service 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1ad5618
[eEPGCache] remove channel 0x1ad5618
allocate channel.. 000e:03e8
(2)tune
tuning to 682750 khz, sr 6875000, fec 15, modulation 3, inversion 2
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:36B1:E:3E8:FFFF0000:0:0:0:
allocate demux
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 2
(2)fe event: status 0, inversion off, m_tuning 1
(2)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x74355be8 running
[eEPGCache] channel 0x74355be8 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (04b1), and 1 audio stream(s) (0077), and the pcr pid is 04b1, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=1201, apid=119
DMX_SET_PES_FILTER(0x4b1) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x77) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x4b1) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
[eDVBCAService] new service 1:0:1:36B1:E:3E8:FFFF0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:36B1:E:3E8:FFFF0000:0:0:0:
PATready
use pmtpid 04b0 for service_id 36b1
eventNewProgramInfo 0 0
have 1 video stream(s) (04b1), and 1 audio stream(s) (0077), and the pcr pid is 04b1, and the text pid is ffffffff
decoder state: play, vpid=1201, apid=119
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCIInterfaces] gotPMT
sdt update done!
[EPGC] start caching events(1354747405)
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[EPGC] nownext finished(1354747417)
action ->  InfobarChannelSelection openServiceList
action ->  OkCancelActions ok
playing 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:36B1:E:3E8:FFFF0000:0:0:0:
[eDVBCAService] free service 1:0:1:36B1:E:3E8:FFFF0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x74355be8
[eEPGCache] remove channel 0x74355be8
[EPGC] abort caching events !!
allocate channel.. 0009:03e8
(2)tune
tuning to 642750 khz, sr 6875000, fec 15, modulation 3, inversion 2
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
allocate demux
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 2
(2)fe event: status 0, inversion off, m_tuning 1
(2)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1a40810 running
[eEPGCache] channel 0x1a40810 running
stop release channel timer
[EPGC] next update in 49 min
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (04d9), and 1 audio stream(s) (04da), and the pcr pid is 04d9, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=1241, apid=1242
DMX_SET_PES_FILTER(0x4d9) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x4da) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x4d9) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
[eDVBCAService] new service 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
PATready
use pmtpid 04d8 for service_id 008b
eventNewProgramInfo 0 0
have 1 video stream(s) (04d9), and 1 audio stream(s) (04da), and the pcr pid is 04d9, and the text pid is ffffffff
decoder state: play, vpid=1241, apid=1242
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
sdt update done!
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
action ->  GlobalActions volumeUp
Setvolume: 20 20 (raw)
Setvolume: 51 51 (-1db)
setValue 20
action ->  GlobalActions volumeUp
Setvolume: 25 25 (raw)
Setvolume: 48 48 (-1db)
setValue 25
action ->  GlobalActions volumeUp
Setvolume: 30 30 (raw)
Setvolume: 45 45 (-1db)
setValue 30
action ->  GlobalActions volumeUp
Setvolume: 35 35 (raw)
Setvolume: 41 41 (-1db)
setValue 35
action ->  GlobalActions volumeUp
Setvolume: 40 40 (raw)
Setvolume: 38 38 (-1db)
setValue 40
action ->  GlobalActions volumeUp
Setvolume: 45 45 (raw)
Setvolume: 35 35 (-1db)
setValue 45
action ->  GlobalActions volumeUp
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
setValue 50
action ->  GlobalActions volumeUp
Setvolume: 55 55 (raw)
Setvolume: 29 29 (-1db)
setValue 55
action ->  GlobalActions volumeUp
Setvolume: 60 60 (raw)
Setvolume: 26 26 (-1db)
setValue 60
action ->  GlobalActions volumeUp
Setvolume: 65 65 (raw)
Setvolume: 23 23 (-1db)
setValue 65
action ->  GlobalActions volumeDown
Setvolume: 60 60 (raw)
Setvolume: 26 26 (-1db)
setValue 60
action ->  GlobalActions volumeDown
Setvolume: 55 55 (raw)
Setvolume: 29 29 (-1db)
setValue 55
action ->  GlobalActions volumeDown
Setvolume: 50 50 (raw)
Setvolume: 32 32 (-1db)
setValue 50
action ->  GlobalActions volumeDown
Setvolume: 45 45 (raw)
Setvolume: 35 35 (-1db)
setValue 45
action ->  InfobarChannelSelection openServiceList
action ->  ChannelSelectBaseActions showFavourites
action ->  OkCancelActions ok
action ->  OkCancelActions ok
playing 1:0:19:1B7B:C88:3:EB0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
[eDVBCAService] free service 1:0:1:8B:9:3E8:FFFF0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1a40810
[eEPGCache] remove channel 0x1a40810
allocate channel.. 0c88:0003
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11856000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 235 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1256 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:19:1B7B:C88:3:EB0000:0:0:0:
allocate demux
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01039f4
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion on, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x72b52238 running
[eEPGCache] channel 0x72b52238 running
stop release channel timer
[EPGC] next update in 2 sec
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0205), and 1 audio stream(s) (005c), and the pcr pid is 0205, and the text pid is 0024
allocate demux
decoder state: play, vpid=517, apid=92
DMX_SET_PES_FILTER(0x205) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x5c) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x205) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x24) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
[eDVBCAService] new service 1:0:19:1B7B:C88:3:EB0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:19:1B7B:C88:3:EB0000:0:0:0:
PATready
use pmtpid 09e7 for service_id 1b7b
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (0205), and 1 audio stream(s) (005c), and the pcr pid is 0205, and the text pid is 0024
decoder state: play, vpid=517, apid=92
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
AITready
sdt update done!
close frontend 2
VIDEO_GET_EVENT - ok
[EPGC] start caching events(1354747908)
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 23:51:52
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[EPGC] nownext finished(1354747931)
[EPGC] schedule finished(1354748006)
[EPGC] stop caching events(1354748006)
[EPGC] next update in 60 min
action ->  InfobarChannelSelection openServiceList
action ->  ChannelSelectBaseActions showFavourites
action ->  OkCancelActions ok
action ->  OkCancelActions ok
playing 1:0:1:474:3:56:300000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:19:1B7B:C88:3:EB0000:0:0:0:
[eDVBCAService] free service 1:0:19:1B7B:C88:3:EB0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x72b52238
[eEPGCache] remove channel 0x72b52238
allocate channel.. 0003:0056
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12054000 Pol 1 SR 27500000 INV 2 FEC 3 orbpos 48 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1454 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:474:3:56:300000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01039f7
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion on, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x72b52238 running
[eEPGCache] channel 0x72b52238 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0475), and 1 audio stream(s) (0476), and the pcr pid is 0475, and the text pid is 047b
allocate demux
decoder state: play, vpid=1141, apid=1142
DMX_SET_PES_FILTER(0x475) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x476) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x475) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x47b) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
[eDVBCAService] new service 1:0:1:474:3:56:300000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:474:3:56:300000:0:0:0:
[SEC] set dynamic current limiting
PATready
use pmtpid 0474 for service_id 0474
eventNewProgramInfo 0 0
have 1 video stream(s) (0475), and 4 audio stream(s) (0476, 0477, 0478, 0479), and the pcr pid is 0475, and the text pid is 047b
decoder state: play, vpid=1141, apid=1142
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
sdt update done!
[EPGC] start caching events(1354748334)
VIDEO_GET_EVENT - ok
[eDVBLocalTimerHandler] diff is -1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 23:58:56
[eDVBLocalTimerHandler] m_time_difference is -1
[eDVBLocalTimerHandler] set Linux Time
action ->  InfobarChannelSelection openServiceList
FATAL: dvb/epgcache.cpp:238 ASSERTION pos <= 4108 FAILED!
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
  </enigma2crashlog>
</crashlogs>
</openpli>

Edited by Henksat, 6 December 2012 - 07:40.
Log in codeveld gezet, gaarna aandacht hiervoor.


Re: groen scherm tijdens zappen #2 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 6 December 2012 - 12:32

FATAL: dvb/epgcache.cpp:238 ASSERTION pos <= 4108 FAILED!

Gebruik jij crossepg?

* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: groen scherm tijdens zappen #3 stevie

  • Member
  • 31 posts

0
Neutral

Posted 6 December 2012 - 12:37


FATAL: dvb/epgcache.cpp:238 ASSERTION pos <= 4108 FAILED!

Gebruik jij crossepg?

waar kan ik dat zien voor zover ik weet gebruik ik alleen rytec epg ,waar kan ik zien of ik ook cross epg gebruik ?

Edited by stevie, 6 December 2012 - 12:38.


Re: groen scherm tijdens zappen #4 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 6 December 2012 - 12:52

Dan gebruik je geen cross epg.

Kijk eens op je harddisk of je file epg.dat kunt vinden. meestal in /hdd en gooi die eens weg.

* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: groen scherm tijdens zappen #5 stevie

  • Member
  • 31 posts

0
Neutral

Posted 6 December 2012 - 12:58

ik zie bij extensions alleen staan xmltvimport en xmltvimport-rytec die beide beide heb ik toch ook nodig ik kan niks van cross epg vinden,heeft het te maken met epg die crash,misschien corrupte epg file ofzo,bij epg instellingen heb ik 5x ja en de laatste is 0 als ze vragen oude epg data bewaren voor

Re: groen scherm tijdens zappen #6 stevie

  • Member
  • 31 posts

0
Neutral

Posted 6 December 2012 - 12:59

Dan gebruik je geen cross epg.

Kijk eens op je harddisk of je file epg.dat kunt vinden. meestal in /hdd en gooi die eens weg.

die file kan ik vinden die is 15.5mb groot
ik heb deze crash maar 1 keer gehad ik heb net een nieuwe vu ultimo box en ik gebruik hem al 5 dagen misschien toeval of iets met corrupte epg,ik heb er nu verder geen last meer van maar wil graag weten hoe ik het in de toekomst kan voorkomen,ik kan misschien beter via ppanel system tools even de epg verwijderen en opnieuw inladen of bedoel je dat niet ?

Edited by stevie, 6 December 2012 - 13:01.


Re: groen scherm tijdens zappen #7 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 6 December 2012 - 13:14

Dit probleem zou normaal niet mogen optreden, of je moet de box echt met de stekker uitgezet hebben. Je hoeft hiet geen speciale maatregelen voor te nemen.

* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: groen scherm tijdens zappen #8 stevie

  • Member
  • 31 posts

0
Neutral

Posted 6 December 2012 - 13:42

Dit probleem zou normaal niet mogen optreden, of je moet de box echt met de stekker uitgezet hebben. Je hoeft hiet geen speciale maatregelen voor te nemen.

het heeft met de epg te maken als ik je goed begrijp en als ik deze epg verwijder en nieuwe in zou laden dan is het als het goed is verholpen of is er iets ernstigs aan de hand waar ik verder niks aan kan doen ?

Re: groen scherm tijdens zappen #9 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 6 December 2012 - 13:46

Nee, wat ik al zeg, het is heel waarschijnlijk iets eenmaligs. Even met ftp of ssh of telnet die file verwijderen en je box opnieuw opstarten en dan is het probleem waarschijnlijk voorbij.

* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: groen scherm tijdens zappen #10 stevie

  • Member
  • 31 posts

0
Neutral

Posted 6 December 2012 - 13:51

Nee, wat ik al zeg, het is heel waarschijnlijk iets eenmaligs. Even met ftp of ssh of telnet die file verwijderen en je box opnieuw opstarten en dan is het probleem waarschijnlijk voorbij.

dank u voor je hulp ik heb epg file delete dmv ppanels systemtools en ga nu nieuwe inladen.

Edited by stevie, 6 December 2012 - 13:52.


Re: groen scherm tijdens zappen #11 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 6 December 2012 - 18:21

Oef ik voel me zonder "u" al oud genoeg ;) Ga eerst maar eens kijken of het helpt, dan mag je me bedanken ;)

* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: groen scherm tijdens zappen #12 stevie

  • Member
  • 31 posts

0
Neutral

Posted 6 December 2012 - 18:58

Oef ik voel me zonder "u" al oud genoeg ;) Ga eerst maar eens kijken of het helpt, dan mag je me bedanken ;)

ik heb de epg file delete en nieuwe ingeladen en tot nu toe gaat het goed het is ook maar 1x voor gekomen dat groene scherm in 5 dagen intensief gebruik nu dus even afwachten de komende dagen,de epg is wel de oorzaak geweest van deze crash volgens jou ?

Re: groen scherm tijdens zappen #13 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 6 December 2012 - 19:20

Ja, dat staat in de foutmelding ;)

* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: groen scherm tijdens zappen #14 stevie

  • Member
  • 31 posts

0
Neutral

Posted 6 December 2012 - 19:28

Ja, dat staat in de foutmelding ;)

en als ik je goed begrijp zijn er verder geen foutmeldingen te vinden in mijn logfile en ziet het er dus verder netjes uit ?

Re: groen scherm tijdens zappen #15 Erik Slagter

  • PLi® Core member
  • 46,969 posts

+541
Excellent

Posted 6 December 2012 - 19:36

Dat is een goede vraag van je ;)

Ik ben geen ontwikkelaar, maar voor zover ik het kan overzien, zie ik geen zaken die we niet altijd zien, het ziet er verder "normaal" uit.

* Wavefrontier T90 with 28E/23E/19E/13E via SCR switches 2 x 2 x 6 user bands
I don't read PM -> if you have something to ask or to report, do it in the forum so others can benefit. I don't take freelance jobs.
Ik lees geen PM -> als je iets te vragen of te melden hebt, doe het op het forum, zodat anderen er ook wat aan hebben.


Re: groen scherm tijdens zappen #16 stevie

  • Member
  • 31 posts

0
Neutral

Posted 6 December 2012 - 19:38

Ik hou het in de gaten en mocht het weer fout gaan dan meld ik me wel weer,bedankt voor je tijd


2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users