Jump to content


Photo

USB DTT

help

  • Please log in to reply
32 replies to this topic

#1 zappomax

  • Member
  • 6 posts

0
Neutral

Posted 11 December 2012 - 11:46

Hi,
just installed last OpenPli. After installed by extensions manager the AF9035 driver for my AverMedia Volar Green HD A835 USB DTT pen, I restart e2 but no way, the usb DTT pen can't be recognized. Even with a full reboot the situation is the same.
What can I do?

Re: USB DTT #2 caidbaa

  • Member
  • 20 posts

0
Neutral

Posted 12 December 2012 - 11:07

You must leave openpli,here you cant get help for that...

Re: USB DTT #3 zappomax

  • Member
  • 6 posts

0
Neutral

Posted 12 December 2012 - 11:21

You must leave openpli,here you cant get help for that...

?????????
Why?? Is this a "Enduser support" forum or not??

P.s.: my box is an Xtrend ET9200

Edited by zappomax, 12 December 2012 - 11:25.


Re: USB DTT #4 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 12 December 2012 - 11:27

please post the output of the command 'dmesg', just after you plugged in the device

Re: USB DTT #5 Alain_sat

  • Senior Member
  • 624 posts

+1
Neutral

Posted 12 December 2012 - 16:03

I' ve been told that the dependencies doesn't load.
Same problem on our board.
@pieterg you want this user to plugin the stick and then to open a telnet session and enter the dmesg command?
I see this command lists what it mounts, in my case the Nova HD.

Just a remark to zappomax.
Please put your usb stick in the rear of your decoder, mine didn't work in the front usb.

ET9000 en XP1000 VU+ Duo met OpenPli, veruit de beste decoder die ik de laatste jaren gekocht heb.
 


Re: USB DTT #6 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 12 December 2012 - 16:34

@pieterg you want this user to plugin the stick and then to open a telnet session and enter the dmesg command?


indeed

I see this command lists what it mounts, in my case the Nova HD.


but 'just after you plugged in the device' dmesg should show what happened when the device was detected.

Re: USB DTT #7 Alain_sat

  • Senior Member
  • 624 posts

+1
Neutral

Posted 12 December 2012 - 16:49

You mean without restart?
In my case it did only show that the usb was removed, but only detected after full restart, but it' s a Nova.

ET9000 en XP1000 VU+ Duo met OpenPli, veruit de beste decoder die ik de laatste jaren gekocht heb.
 


Re: USB DTT #8 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 12 December 2012 - 17:20

you should see activity after plugging the device. If not, the problem is hardware related.

Re: USB DTT #9 caidbaa

  • Member
  • 20 posts

0
Neutral

Posted 12 December 2012 - 19:29

hahaha:)

Re: USB DTT #10 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 12 December 2012 - 19:36

hahaha:)


and you're wondering why you didn't get any help here ;)

Re: USB DTT #11 WTE

  • Senior Member
  • 694 posts

+30
Good

Posted 12 December 2012 - 20:50

Hi,
just installed last OpenPli. After installed by extensions manager the AF9035 driver for my AverMedia Volar Green HD A835 USB DTT pen, I restart e2 but no way, the usb DTT pen can't be recognized. Even with a full reboot the situation is the same.
What can I do?


How did you install the af9035 drivers?
I think that the 9035 package is not been made by openpli. (maybe forgotten?)

You should install
kernel-module-dvb-usb-af9035
firmware-dvb-usb-af9035-01 (Which seems not yet been build in openpli)
For firmware unpack the attachment and place the file in directory /lib/firmware

Attached Files


Mut@nt HD51 STB 4K

   :rolleyes:                :rolleyes:


Re: USB DTT #12 Dimitrij

  • PLi® Core member
  • 6,608 posts

+213
Excellent

Posted 12 December 2012 - 21:07

For ET and af9035
dvb-usb-af9035-02.fw
http://openpli.org/f...post__p__309048

Lunix3-4K/VU+solo4k(thanks guys to gisclub.tv)


Re: USB DTT #13 zappomax

  • Member
  • 6 posts

0
Neutral

Posted 12 December 2012 - 22:10

please post the output of the command 'dmesg', just after you plugged in the device

OK. I was wrong...
There's no af9035 driver (Why??) in the list of downloadable dvb drivers on "Download plugin" panel on OpenPli image.
I've installed the af9035 driver with another image OpenPli based (Xtrend Support Alliance v1).
After the dmesg command on that image, I get:
usbserial: USB Serial Driver core
usbcore: registered new interface driver belkin_sa
USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
usbcore: registered new interface driver carl9170
usbcore: registered new interface driver dvb_usb_af9035
usbcore: registered new interface driver ftdi_sio
USB Serial support registered for FTDI USB Serial Device
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
NET: Registered protocol family 10
usbcore: registered new interface driver keyspan
USB Serial support registered for Keyspan - (without firmware)
USB Serial support registered for Keyspan 1 port adapter
USB Serial support registered for Keyspan 2 port adapter
USB Serial support registered for Keyspan 4 port adapter
usbcore: registered new interface driver pl2303
USB Serial support registered for pl2303
rtw driver version=v3.3.0_2971.20111128
usbcore: registered new interface driver rtl8192cu
r8712u: module is from the staging directory, the quality is unknown, you have b
usbcore: registered new interface driver r8712u
usbcore: registered new interface driver rt2500usb
usbcore: registered new interface driver rt2800usb
usbcore: registered new interface driver rt73usb
usbcore: registered new interface driver rtl8187
usbcore: registered new interface driver zd1211rw
svc: failed to register lockdv1 RPC service (errno 124).
usb 1-2: new high-speed USB device number 3 using ehci-brcm
dvb-usb: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in cold state, will try

Edited by zappomax, 12 December 2012 - 22:11.


Re: USB DTT #14 zappomax

  • Member
  • 6 posts

0
Neutral

Posted 12 December 2012 - 22:15

<p>

How did you install the af9035 drivers?
I think that the 9035 package is not been made by openpli. (maybe forgotten?)

You should install
kernel-module-dvb-usb-af9035
firmware-dvb-usb-af9035-01 (Which seems not yet been build in openpli)
For firmware unpack the attachment and place the file in directory /lib/firmware

I tried yr hint:
I putted dvb-usb-af9035-01.fw file in lib/firmware (chmod 755) the I gived the commad "opkg install kernel-module-dvb-usb-af9035"
This is what I get:
[code=auto:0]root@et9x00:~# opkg install kernel-module-dvb-usb-af9035
Installing kernel-module-dvb-usb-af9035 (3.6.0-r3.4) to root...
Downloading http://downloads.pli...0/et9x00/kernel-
Installing kernel-module-tua9001 (3.6.0-r3.4) to root...
Downloading http://downloads.pli...0/et9x00/kernel-
Installing kernel-module-fc0011 (3.6.0-r3.4) to root...
Downloading http://downloads.pli...0/et9x00/kernel-
Installing kernel-module-dvb-usb (3.6.0-r3.4) to root...
Downloading http://downloads.pli...0/et9x00/kernel-
Installing kernel-module-mxl5007t (3.6.0-r3.4) to root...
Downloading http://downloads.pli...0/et9x00/kernel-
Installing kernel-module-tda18218 (3.6.0-r3.4) to root...
Downloading http://downloads.pli...0/et9x00/kernel-
Installing kernel-module-af9033 (3.6.0-r3.4) to root...
Downloading http://downloads.pli...0/et9x00/kernel-
Configuring kernel-module-mxl5007t.
Configuring kernel-module-af9033.
Configuring kernel-module-tda18218.
Configuring kernel-module-dvb-usb.
Configuring kernel-module-tua9001.
Configuring kernel-module-fc0011.
Configuring kernel-module-dvb-usb-af9035.

Edited by zappomax, 12 December 2012 - 22:18.


Re: USB DTT #15 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 12 December 2012 - 22:17

we did not create a meta package for this device (because no one of the developers has this type of device, so we do not know which frontends / firmwares are needed to make it work).
But, all necessary drivers are in the feed.
Start with kernel-module-dvb-usb-af9035, and see what other modules (or firmware) it needs.
dmesg will tell you, when you plug the device.

(btw, your dmesg output is not complete, the interesting messages should follow just after the piece you've copied here)

Re: USB DTT #16 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 12 December 2012 - 22:23

you need dvb-usb-af9035-02.fw, as Dima73 says (as you can see in your dmesg output)
Just follow the dmesg output step by step, till you have no more errors.

Re: USB DTT #17 zappomax

  • Member
  • 6 posts

0
Neutral

Posted 12 December 2012 - 22:27

we did not create a meta package for this device (because no one of the developers has this type of device, so we do not know which frontends / firmwares are needed to make it work).
But, all necessary drivers are in the feed.
Start with kernel-module-dvb-usb-af9035, and see what other modules (or firmware) it needs.
dmesg will tell you, when you plug the device.

(btw, your dmesg output is not complete, the interesting messages should follow just after the piece you've copied here)




This is all I get:
usbcore: registered new interface driver tpm														
dvb: module_layout: kernel tainted.																  
Disabling lock debugging due to kernel taint														
Console: switching to colour frame buffer device 160x45											  
input: dreambox remote control (native) as /devices/virtual/input/input0							
input: dreambox advanced remote control (native) as /devices/virtual/input/input1					
DVB: registering new adapter (dvb0)																  
DVB: registering adapter 0 frontend 0 (DVB-S2)...													
DVB: registering adapter 0 frontend 1 (DVB-S2)...													
input: front panel as /devices/virtual/input/input2												  
usbcore: registered new interface driver ath9k_htc												  
usbcore: registered new interface driver carl9170													
usbcore: registered new interface driver dvb_usb_af9035											  
NET: Registered protocol family 10																  
																									
rtw driver version=v3.3.0_2971.20111128															  
usbcore: registered new interface driver rtl8192cu												  
r8712u: module is from the staging directory, the quality is unknown, you have been warned.		  
usbcore: registered new interface driver r8712u													  
usbcore: registered new interface driver rt2500usb												  
usbcore: registered new interface driver rt2800usb												  
usbcore: registered new interface driver rt73usb													
usbcore: registered new interface driver rtl8187													
usbcore: registered new interface driver zd1211rw													
Console: switching to colour dummy device 80x25								  
usb 1-2: new high-speed USB device number 3 using ehci-brcm					  
dvb-usb: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in cold state, will try to
dvb-usb: did not find the firmware file. (dvb-usb-af9035-02.fw) Please see linux/D
dvb_usb_af9035: probe of 1-2:1.0 failed with error -2							
[email="root@et9x00"]root@et9x00[/email]:~#

Edited by zappomax, 12 December 2012 - 22:29.


Re: USB DTT #18 pieterg

  • PLi® Core member
  • 32,766 posts

+245
Excellent

Posted 12 December 2012 - 22:29

dvb-usb: did not find the firmware file. (dvb-usb-af9035-02.fw) Please see linux/D



Re: USB DTT #19 WTE

  • Senior Member
  • 694 posts

+30
Good

Posted 12 December 2012 - 22:31

Please add the dvb-usb-af9035-02.fw in /lib/firmware
Hopefully after a reboot the device will work

Attached Files


Edited by WTE, 12 December 2012 - 22:32.

Mut@nt HD51 STB 4K

   :rolleyes:                :rolleyes:


Re: USB DTT #20 zappomax

  • Member
  • 6 posts

0
Neutral

Posted 12 December 2012 - 22:56

we did not create a meta package for this device (because no one of the developers has this type of device, so we do not know which frontends / firmwares are needed to make it work).
But, all necessary drivers are in the feed.
Start with kernel-module-dvb-usb-af9035, and see what other modules (or firmware) it needs.
dmesg will tell you, when you plug the device.

(btw, your dmesg output is not complete, the interesting messages should follow just after the piece you've copied here)

U r right!!
This is the missed file I've just found on the web: dvb-usb-af9035-02.fw!
Now my USB DTT pen works at last!!
Thx a lot to all!!!





Also tagged with one or more of these keywords: help

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users