14 replies to this topic

[ambrosa]

Hi guys.

This morning I've made an "opkg update ; opkg upgrade" in my Clarke Teck 9100
Last upgrade was done by me about 1 month ago.
Since 10 minutes before upgrade, my CT was working very fine.


After upgrading (involving new kernel a new E2 image) and rebooting, my system was broken.


Symptons:

1) I've a DTT USB stick Avermedia A867
USB stick is found by kernel and module is correctly loaded

dmesg:

AVerMedia A867 driver module V1.0.27 loaded.
dvb-usb: found a 'AVerMedia A867 DVB-T Recevier' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AVerMedia A867 DVB-T Recevier)
DVB: registering adapter 0 frontend 0 (A867 USB DVB-T)...
dvb-usb: AVerMedia A867 DVB-T Recevier successfully initialized and connected.
usbcore: registered new interface driver dvb-usb-a867


lsmod:

Module Size Used by
ntfs 117802 0
ipv6 351430 12
dvb 4874979 7
modloader2 32661 1 dvb
modloader 22281 0
tpm 6509 3 dvb,modloader2,modloader
dvb_usb_a867 210137 0
dvb_usb 18026 1 dvb_usb_a867


but in Enigma2 there is no the third tuner DTT. It's disappeared !


2) embedded DVB-S2 tuner are found by kernel

DVB: registering new adapter (dvb0)
DVB: registering adapter 1 frontend 0 (DVB-S2)...
DVB: registering adapter 1 frontend 1 (DVB-S2)...

and into E2 they are configured correctly but OSD say to me:

Service unavailable!
Check tuner configuration!

for all channels.


3) there is a minor error in one plugin:

root@et9x00:~# opkg update
Package enigma2-plugin-systemplugins-autobouquetsmaker version git194+b8c7e01-r25 has no valid architecture, ignoring.

Edited by ambrosa, 16 December 2012 - 14:04.

[ims]

Same was today on my 800se - i made update from GUI - after it no signal on both tuners ( S2 and DVB-T usb). I thought, that it was some my tests... After reflash and restore all work well.

[theparasol]

Could it be that it has something to do with this: http://openpli.git.s...f497aee9f6bf2ec

Its suggested to users to reflash their boxes otherwise the old glib is still installed

[ambrosa]

NO SUCCESS

I've just reflash from scratch my CT9100 with OpenPLi-3.0-beta-et9x00-20121216_usb.zip

- flash ok
- initial setup ok
- install A867 kernel module ok

Exactly as before: third tuner (DTT A867) is missing (dmesg is ok as before), Tuner A&B (DVB-S2) correctly configured but same error as before.
Full scan not working: search exit immediately

HyperBUG somewhere.....

[littlesat]

I also had to reflash this morning...

[theparasol]

Do you use autobackup? Perhaps delete autobackup settings and try fresh flash again.
That way you can be absolutely sure that no old / incorrect settings are reapplied.

[MiLo]

Fix is on the way.

[theparasol]

Milo is referring to this fix (I presume): http://openpli.git.s...57b006cd27adf87

[ambrosa]

Thanks Milo.

BTW I've just flash with previous image OpenPLi-3.0-beta-et9x00-20121215_usb.zip (yesterday image) and IT WORKS.

Then I've made just now (19:03 CET) an opkg update + upgrade and then reboot.
System IS WORKING again (??)

Then I've installed A867 kernel module 'opkg install kernel-module-dvb-usb-a867' and reboot.
After that system STOP WORKING as before.

All tuners (DVB-S2 and DTT) stop working after loading A867 kernel module.

[theparasol]

Try and report again tomorrow with image that contains Milo's fix (as its build this night if everything goes ok for your model of box!)

[ambrosa]

Milo is referring to this fix (I presume): http://openpli.git.s...57b006cd27adf87

Looks to be fine...

Removing USB modules and reboot, system is working again (only with DVB-S2 tuners obviously)

root@et9x00:~# opkg remove kernel-module-dvb-usb-a867
Removing package kernel-module-dvb-usb-a867 from root...
root@et9x00:~# opkg remove kernel-module-dvb-usb
Removing package kernel-module-dvb-usb from root...

[ims]

now it works well (own build with it).

btw - with this "bug", when was tuned to DVB-USB and reboot, then there was GSOD continualy with:

Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Navigation.py", line 51, in dispatchEvent
  File "/usr/lib/enigma2/python/Components/PerServiceDisplay.py", line 17, in event
  File "/usr/lib/enigma2/python/Components/Sources/CurrentService.py", line 26, in serviceEvent
  File "/usr/lib/enigma2/python/Components/Element.py", line 86, in changed
  File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
  File "/usr/lib/enigma2/python/Components/Converter/PliExtraInfo.py", line 356, in changed
  File "/usr/lib/enigma2/python/Components/Element.py", line 86, in changed
  File "/usr/lib/enigma2/python/Tools/CList.py", line 7, in __call__
  File "/usr/lib/enigma2/python/Components/Renderer/Label.py", line 21, in changed
  File "/usr/lib/enigma2/python/Components/Element.py", line 15, in wrapper
  File "/usr/lib/enigma2/python/Components/Converter/PliExtraInfo.py", line 241, in getText
  File "/usr/lib/enigma2/python/Tools/Transponder.py", line 32, in ConvertToHumanReadable
TypeError: int() argument must be a string or a number, not 'NoneType'
(PyObject_CallObject(<bound method Navigation.dispatchEvent of <Navigation.Navigation instance at 0x2017508>>,(6,)) failed)

may be, ConvertToHumanReadable could be fixed for return...

[ambrosa]

Do you use autobackup? Perhaps delete autobackup settings and try fresh flash again.
That way you can be absolutely sure that no old / incorrect settings are reapplied.

No, I hate autobackup for the same reasons :-)

[evagelos]

Some problem here
After remove usbDTT boot ok but with usbDTT does not boot

[ambrosa]

Problem solved.

I've just flash my STB with today image (et9x00 2012-12-17) , installed a867 kernel module and all works fine.

Now a867 module is loaded AFTER dvb-s2 frontend

DVB: registering new adapter (dvb0)
DVB: registering adapter 0 frontend 0 (DVB-S2)...
DVB: registering adapter 0 frontend 1 (DVB-S2)...
input: front panel as /devices/virtual/input/input2
AVerMedia A867 driver module V1.0.27 loaded.
dvb-usb: found a 'AVerMedia A867 DVB-T Recevier' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AVerMedia A867 DVB-T Recevier)
DVB: registering adapter 1 frontend 0 (A867 USB DVB-T)...
dvb-usb: AVerMedia A867 DVB-T Recevier successfully initialized and connected.
usbcore: registered new interface driver dvb-usb-a867