Jump to content


Photo

ET9x00 - A867 (sky dvb-t key) loading problem

et9x00

  • Please log in to reply
31 replies to this topic

#1 DrAk3

  • Senior Member
  • 85 posts

+2
Neutral

Posted 19 December 2012 - 23:07

Hi,
with the last update the A867 usb key doesn't work.
here is the dmesg error:


dvb-usb: found a 'AVerMedia HD Volar (A867)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AVerMedia HD Volar (A867))
dvb-usb: MAC address: 00:00:00:00:00:00
af9035: recv bulk message truncated (5 != 9)
af9033_rd_regs: i2c rd failed=-5 reg=804191 len=4
dvb-usb: no frontend was attached by 'AVerMedia HD Volar (A867)'

here is the lsmod output:


Module Size Used by
dvb_usb_a867 210137 0
dvb_usb_af9035 13229 1
mxl5007t 7525 1 dvb_usb_af9035
af9033 10530 1 dvb_usb_af9035
fc0011 4470 1 dvb_usb_af9035
tda18218 3787 1 dvb_usb_af9035
tua9001 2088 1 dvb_usb_af9035
dvb_usb 18026 2 dvb_usb_a867,dvb_usb_af9035
ipv6 351430 12
dvb 5022440 39
modloader2 32629 1 dvb
modloader 22281 0
tpm 6509 3 dvb,modloader2,modloader

No problem with the A835 usb key.

D.

Re: ET9x00 - A867 (sky dvb-t key) loading problem #2 DrAk3

  • Senior Member
  • 85 posts

+2
Neutral

Posted 19 December 2012 - 23:22

update:

i tryed to reinstall 9033 and A867 package, reset the system and now the tuner is loaded but not working.

here is the log:


DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))...
mxl5007t 4-0060: creating new instance
mxl5007t_get_chip_id: unknown rev (3f)
mxl5007t_get_chip_id: MxL5007T detected @ 4-0060
dvb-usb: AVerMedia HD Volar (A867) successfully initialized and connected.
dvb-usb: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-af9035-02.fw'
af9035: firmware version=11.5.9.0
dvb-usb: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AVerMedia AVerTV Volar HD/PRO (A835))
dvb-usb: MAC address: 00:00:00:00:00:00
af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
DVB: registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))...
tda18218: NXP TDA18218HN successfully identified.
dvb-usb: AVerMedia AVerTV Volar HD/PRO (A835) successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_af9035
AVerMedia A867 driver module V1.0.27 loaded.
usbcore: registered new interface driver dvb-usb-a867
Console: switching to colour dummy device 80x25
mxl5007t_write_reg: 473: failed!
mxl5007t_init: error -140 on line 696
DVB: registering adapter 0 frontend 2 (vtuner)...
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 714
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 716
DVB: registering adapter 0 frontend 3 (vtuner)...
mxl5007t_write_reg: 473: failed!
mxl5007t_init: error -140 on line 696
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 714
mxl5007t_write_reg: 473: failed!
mxl5007t_sleep: error -140 on line 716


any ideas?

regards

D.

Re: ET9x00 - A867 (sky dvb-t key) loading problem #3 DrAk3

  • Senior Member
  • 85 posts

+2
Neutral

Posted 19 December 2012 - 23:39

ok,
sorry for this "spam".

The problem is an incompatibility with the A835 modules (kernel-module-mxl5007t and kernel-module-dvb-usb-af9035) and the A867 (kernel-module-dvb-usb-a867)
If i removed them the A867 works good (but obviously not the A835) and viceversa.

hope this will help someone to solve the problem

D.

Re: ET9x00 - A867 (sky dvb-t key) loading problem #4 Gennar1

  • Senior Member
  • 296 posts

+31
Good

Posted 20 December 2012 - 03:03

Yes, now both the dvb-usb-af9035 and the dvb-usb-a867 drivers support the A867 devices. To avoid conflicts, you can't install both drivers at the same time.

BTW, in my experience the dvb-usb-a867 driver is still a little better, and zapping is much faster. What do you think?

Re: ET9x00 - A867 (sky dvb-t key) loading problem #5 DrAk3

  • Senior Member
  • 85 posts

+2
Neutral

Posted 20 December 2012 - 10:12

Hi gerrar1,
i cant' use both key together.

now i removed the kernel-module-dvb-usb-af9035, reboot and the a867 workd fine but the A835 is not present.
Can u help me to choose the right packages in order to use both?

regards

D.

PS.
as soon as possible i'll check the zap response time :)

Yes, now both the dvb-usb-af9035 and the dvb-usb-a867 drivers support the A867 devices. To avoid conflicts, you can't install both drivers at the same time.

BTW, in my experience the dvb-usb-a867 driver is still a little better, and zapping is much faster. What do you think?



Re: ET9x00 - A867 (sky dvb-t key) loading problem #6 DrAk3

  • Senior Member
  • 85 posts

+2
Neutral

Posted 20 December 2012 - 10:34

ok i make some tests:

remove:

kernel-module-dvb-usb-af9035
kernel-module-tua9001
kernel-module-mxl5007t
kernel-module-dvb-usb-a867
kernel-module-dvb-usb

- the system doesn't recognise any usb dtt tuner (ok its right! :P)

Installing:

kernel-module-dvb-usb-a867
kernel-module-dvb-usb

- the system add A867 tuner and no A835

remove the 2 packages and installing

kernel-module-dvb-usb-af9035
kernel-module-tua9001
kernel-module-mxl5007t
kernel-module-dvb-usb

The system add a835 and no a867 but this is the dmesg:

dvb-usb: found a 'AVerMedia HD Volar (A867)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AVerMedia HD Volar (A867))
dvb-usb: MAC address: 00:00:00:00:00:00
af9035: recv bulk message truncated (5 != 9)
af9033_rd_regs: i2c rd failed=-5 reg=804191 len=4
dvb-usb: no frontend was attached by 'AVerMedia HD Volar (A867)'
dvb-usb: AVerMedia HD Volar (A867) successfully initialized and connected.
dvb-usb: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (AVerMedia AVerTV Volar HD/PRO (A835))
dvb-usb: MAC address: 00:00:00:00:00:00
af9033: firmware version: LINK=11.5.9.0 OFDM=5.17.9.1
DVB: registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))...
tda18218: NXP TDA18218HN successfully identified.
dvb-usb: AVerMedia AVerTV Volar HD/PRO (A835) successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_af9035

what's wrong?

cheers

D.

Re: ET9x00 - A867 (sky dvb-t key) loading problem #7 Gennar1

  • Senior Member
  • 296 posts

+31
Good

Posted 20 December 2012 - 12:13

Probably the af9035 driver in kernel 3.6.0 is not capable to manage multiple devices. There is some fix for dual tuner cards in kernel 3.7, so maybe this helps also supporting multiple af9035 devices.
I will do some test with the new patches during Christmas holidays, when I will have some free time.

Maybe it's possible to blacklist the A867 usb ID in the af9035 driver and use both drivers together?

Re: ET9x00 - A867 (sky dvb-t key) loading problem #8 DrAk3

  • Senior Member
  • 85 posts

+2
Neutral

Posted 20 December 2012 - 12:27

Uhm this is the modinfo output:

modinfo dvb-usb-af9035
filename: /lib/modules/3.6.0/kernel/drivers/media/dvb/dvb-usb/dvb-usb-af9035.ko
license: GPL
description: Afatech AF9035 driver
author: Antti Palosaari <crope@iki.fi>
alias: usb:v07CAp0825d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CApA867d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CAp1867d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CApB835d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v07CApA835d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v0CCDp0093d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v15A4p1003d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v15A4p1002d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v15A4p1001d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v15A4p1000d*dc*dsc*dp*ic*isc*ip*in*
alias: usb:v15A4p9035d*dc*dsc*dp*ic*isc*ip*in*
depends: dvb-usb,tua9001,tda18218,fc0011,af9033,mxl5007t
intree: Y
vermagic: 3.6.0 SMP mod_unload modversions MIPS32_R1 32BIT
parm: adapter_nr:DVB adapter numbers (array of short)

any ideas? is very important for me to use both usb devices :)

D.

Re: ET9x00 - A867 (sky dvb-t key) loading problem #9 DrAk3

  • Senior Member
  • 85 posts

+2
Neutral

Posted 21 December 2012 - 09:00

uhm.. there are no chance to use the old modules?

af9035: recv bulk message truncated (5 != 9)
af9033_rd_regs: i2c rd failed=-5 reg=804191 len=4
dvb-usb: no frontend was attached by 'AVerMedia HD Volar (A867)'

D.

Re: ET9x00 - A867 (sky dvb-t key) loading problem #10 DrAk3

  • Senior Member
  • 85 posts

+2
Neutral

Posted 21 December 2012 - 17:44

Probably i found the error.
Today i installed e new openpli from scratch. after the installation of dtt modules (9035) this is the error i received:


dvb-usb: found a 'AVerMedia HD Volar (A867)' in cold state, will try to load a firmware
dvb-usb: did not find the firmware file. (dvb-usb-af9035-02.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
dvb_usb_af9035: probe of 1-1.2:1.0 failed with error -2
dvb-usb: found a 'AVerMedia AVerTV Volar HD/PRO (A835)' in cold state, will try to load a firmware
dvb-usb: did not find the firmware file. (dvb-usb-af9035-02.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
dvb_usb_af9035: probe of 1-1.4:1.0 failed with error -2


The module try to use the fw for the 867 also.. and this is obviously an error.

hope this can help someone to solve this problem

D.

Re: ET9x00 - A867 (sky dvb-t key) loading problem #11 Dimitrij

  • PLi® Core member
  • 6,710 posts

+218
Excellent

Posted 21 December 2012 - 18:19

did not find the firmware file. (dvb-usb-af9035-02.fw) Please see linux/Documentation/dvb/ for more details on firmware-problems. (-2)
http://openpli.org/forums/topic/26806-usb-dtt/page__view__findpost__p__319659

Lunix3-4K/VU+solo4k(thanks guys to gisclub.tv)


Re: ET9x00 - A867 (sky dvb-t key) loading problem #12 DrAk3

  • Senior Member
  • 85 posts

+2
Neutral

Posted 21 December 2012 - 19:44

Dima, the log is show only for better understanging the problem. I remove the fw from /lib/firmware only to show that also for the a867 key the module try to use that firmware and this is clearly an error.

D.

Re: ET9x00 - A867 (sky dvb-t key) loading problem #13 Gennar1

  • Senior Member
  • 296 posts

+31
Good

Posted 21 December 2012 - 20:24

It's not an error. The af9035 driver needs that firmware for all the supported devices, including the A867.
You are probably confused because the old dvb-usb-a867 driver does not require any firmware. Anyway, the firmware is still present also in the old driver, but it's embedded in the driver code so no external file is required.

Re: ET9x00 - A867 (sky dvb-t key) loading problem #14 DrAk3

  • Senior Member
  • 85 posts

+2
Neutral

Posted 21 December 2012 - 20:34

Thanks Gennar1.
i think that the main problem is the following error while the module loading for the A867 key:

af9035: recv bulk message truncated (5 != 9)
af9033_rd_regs: i2c rd failed=-5 reg=804191 len=4
dvb-usb: no frontend was attached by 'AVerMedia HD Volar (A867)

I know that the a867 module works better, but i can't use the a835 with it. Im'm planning to buy another a867 key, but this is not the solution :)

regards

D.

Re: ET9x00 - A867 (sky dvb-t key) loading problem #15 andrijat

  • Member
  • 12 posts

0
Neutral

Posted 23 December 2012 - 18:15

Sorry for maybe stupid question, but can someone please tell me how to add and remove kernel-module-dvb-usb-af9035. I have vu+duo and i cant do it from telnet and on packages list i cant find mentioned drivers.

root@vuduo:~# opkg install kernel-module-dvb-usb-af9035
Package enigma2-plugin-systemplugins-autobouquetsmaker version git194+b8c7e01-r25 has no valid architecture, ignoring.
Unknown package 'kernel-module-dvb-usb-af9035'.
Collected errors:
* opkg_install_cmd: Cannot install package kernel-module-dvb-usb-af9035.
root@vuduo:~#

I have placed dvb-usb-af9035-01.fw and dvb-usb-af9035-02.fw in lib/firmware
Maybe i have wrong files. I am using open pli 3.0 updated today.

Edited by andrijat, 23 December 2012 - 18:20.


Re: ET9x00 - A867 (sky dvb-t key) loading problem #16 DrAk3

  • Senior Member
  • 85 posts

+2
Neutral

Posted 24 December 2012 - 12:51

Sorry for maybe stupid question, but can someone please tell me how to add and remove kernel-module-dvb-usb-af9035. I have vu+duo and i cant do it from telnet and on packages list i cant find mentioned drivers.


try to find the right package name with:

opkg list | grep 9035

it should show package name :)

D.

Edited by DrAk3, 24 December 2012 - 12:51.


Re: ET9x00 - A867 (sky dvb-t key) loading problem #17 andrijat

  • Member
  • 12 posts

0
Neutral

Posted 24 December 2012 - 17:27

opkg list | grep 9035 doesnt find anything.

Re: ET9x00 - A867 (sky dvb-t key) loading problem #18 Dimitrij

  • PLi® Core member
  • 6,710 posts

+218
Excellent

Posted 24 December 2012 - 20:08

kernel-module-dvb-usb-af9035

Lunix3-4K/VU+solo4k(thanks guys to gisclub.tv)


Re: ET9x00 - A867 (sky dvb-t key) loading problem #19 MiLo

  • PLi® Core member
  • 13,924 posts

+293
Excellent

Posted 24 December 2012 - 20:25

First "opkg update" to get the list from the server. After that run
opkg list "*9035*"
to find packages with "9035" in their name.
Real musicians never die - they just decompose

Re: ET9x00 - A867 (sky dvb-t key) loading problem #20 andrijat

  • Member
  • 12 posts

0
Neutral

Posted 25 December 2012 - 01:49

Dont know what i am doing wrong but nothing.

opkg update
opkg list | grep 9035 gives no results

I even tried opkg update and opkg upgrade and opkg list | grep 9035

Is it possible for someone to make instalation file so i put it in box and install localy.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users