Hi,
I'm completely new at OpenPLi, actually completely new at all OE-based images. I have few questions, as OpenPLi when freshly installed, is almost "empty" from the plugins point of view. I would like to ask some questions, as wiki looks too old to me, isn't it?
1. Is there tool available to manage pendrive? I would like to have all the picons there and EPG data. If not, there is plugin "flash extnender", but after installation and trial of configuration, box restarted with a "green screen" - enigma crashed. Should I do something special to install it?
2. I mainly need about 5 plugins/extensions to be working: CrossEPG, AirPlayer, Name on zap and Bitrate viewer. The rest is not that important, but if I would be able to change skin from time to time, that would be nice.
I would be highly appreciated for your help.
Cheers,
gulipin
DM800HD se and OpenPLi 3.0 beta 20130109
Started by gulipin, 09 Jan 2013 21:23
18 replies to this topic
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #2
-
- Forum Moderator
PLi® Core member - 27,495 posts
+397
Excellent
Posted 9 January 2013 - 21:36
Welcome to the PLi support board.
1. I have no answer for that.
2. For plugins you can go to menu - application or plugins and then the green button for downloading all available plugins.
Enjoy PLi.
1. I have no answer for that.
2. For plugins you can go to menu - application or plugins and then the green button for downloading all available plugins.
Enjoy PLi.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #3
-
- Senior Member
- 3,000 posts
+51
Good
Posted 9 January 2013 - 22:01
What kind of box do you have?
When you install picons you can choose on wich drive it will be installed.
And the epg data can be saved on an usb pen ,but you have to add a line in /etc/enigma2/settings
with telnet and ftp you can add the line below to the settings file in /etc/enigma2.
init 4
config.misc.epgcache_filename=/media/usb/epg.dat
init 3
change usb in the label you use.
When you install picons you can choose on wich drive it will be installed.
And the epg data can be saved on an usb pen ,but you have to add a line in /etc/enigma2/settings
with telnet and ftp you can add the line below to the settings file in /etc/enigma2.
init 4
config.misc.epgcache_filename=/media/usb/epg.dat
init 3
change usb in the label you use.
Edited by Meega, 9 January 2013 - 22:01.
ET10000+ Openpli 6.1,1m schotel 4x duo-lnb op vaste opstelling.
Momolights teensy 2.0 met 50 leds op een string ,150 channels
DM8000 Openpli 6.1 Release
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #4
-
- PLi® Core member
- 70,563 posts
+1,815
Excellent
Posted 9 January 2013 - 22:02
1. Pendrive === USB stick. 
Stick it in, format it from the menu (if it doesn't already have a linux file system, which is required for picons), use it. When you download picons you will get the option to store them on the pendrive.
Flash extender is (afaik) only for the DM7025, which does suffer from lack of flash. The plugins you name (watch out with CrossEPG, you might get compatibility issues, for EPG import use Rytec's XMLTV toolkit instead) should not give a space problem.
Stick it in, format it from the menu (if it doesn't already have a linux file system, which is required for picons), use it. When you download picons you will get the option to store them on the pendrive.
Flash extender is (afaik) only for the DM7025, which does suffer from lack of flash. The plugins you name (watch out with CrossEPG, you might get compatibility issues, for EPG import use Rytec's XMLTV toolkit instead) should not give a space problem.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #5
-
- Member
- 18 posts
0
Neutral
Posted 9 January 2013 - 22:52
Thanks for your replies.
Just to make some things clear.
I have DM800HD se (original, not a clone). The stick is in, I have my own picons, but OK - I can fristly install from OpenPLi feed and then overwrite mine if it's needed.
I got used to CrossEPG. AFAIR it uses Rytec's XMLTV too. Where can I find the Rytec tool @WanWizard mentioned?
I have successfully installed Flash extender on box before on other images. If I don't do it, I don't think I will be able to install more than 1 skin and maybe 1-2 plugins. The image on OE2.0 as itself is much bigger than it used to be earlier. The difference is about 11 MB afair...
Just to make some things clear.
I have DM800HD se (original, not a clone). The stick is in, I have my own picons, but OK - I can fristly install from OpenPLi feed and then overwrite mine if it's needed.
I got used to CrossEPG. AFAIR it uses Rytec's XMLTV too. Where can I find the Rytec tool @WanWizard mentioned?
I have successfully installed Flash extender on box before on other images. If I don't do it, I don't think I will be able to install more than 1 skin and maybe 1-2 plugins. The image on OE2.0 as itself is much bigger than it used to be earlier. The difference is about 11 MB afair...
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #6
-
- PLi® Core member
- 70,563 posts
+1,815
Excellent
Posted 9 January 2013 - 23:34
OE2.0 is a DMM term.
Unlike most other images out there, OpenPLi doesn't use anything from DMM (apart from the box drivers), we have our own OE environment, and our own Enigma. So you can't compare the two, nor assume that everything that works on a stock image works on OpenPLi.
If you have your own picons, don't install something from the feeds. If you do, and an update is generated, your picons will be automatically overwritten as the box thinks they are still under version control.
The rytec XMLTV system has two plugins, one called xmltvimport, the other xmltvimport-rytec. You need both.
Unlike most other images out there, OpenPLi doesn't use anything from DMM (apart from the box drivers), we have our own OE environment, and our own Enigma. So you can't compare the two, nor assume that everything that works on a stock image works on OpenPLi.
If you have your own picons, don't install something from the feeds. If you do, and an update is generated, your picons will be automatically overwritten as the box thinks they are still under version control.
The rytec XMLTV system has two plugins, one called xmltvimport, the other xmltvimport-rytec. You need both.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #7
-
- Member
- 18 posts
0
Neutral
Posted 9 January 2013 - 23:45
OK, thanks. I will give it a try. Adn what about swapfile? Usually, when I was using images on enigma before DMM closed their sources, it was working more stable. Is it so important right now? I can't find anything regarding swapfile... :/
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #8
-
- PLi® Core member
- 70,563 posts
+1,815
Excellent
Posted 9 January 2013 - 23:46
There is no interface available to create one, because there is no need for it. As far as I know only the DM8000 currently may require a swapfile, under certain conditions, and when running OpenPLi 3.
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #9
-
- Member
- 18 posts
0
Neutral
Posted 10 January 2013 - 01:41
I would rather say, that DM800se will need swapfile, as it has less Flash RAM comparing to DM8000. Of course, the size of the image also differs.
Anyway, I think I will give it a try.
May I post crashlogs here if they appear?
Anyway, I think I will give it a try.
May I post crashlogs here if they appear?
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #10
-
- PLi® Core member
- 57,212 posts
+700
Excellent
Posted 10 January 2013 - 07:41
The swap file is not needed for flash.... but for RAM... flash RAM is a strange combination...
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #11
-
- Member
- 18 posts
0
Neutral
Posted 10 January 2013 - 12:29
You are right. It was already too late for me.
So, if 256 MB RAM is enough, then I will leave it. But 64 MB Flash it's not too much, and Flash Extender would do the job. OK, I will try to install necessary plugins, and let's hope there is enough space for them.
So, if 256 MB RAM is enough, then I will leave it. But 64 MB Flash it's not too much, and Flash Extender would do the job. OK, I will try to install necessary plugins, and let's hope there is enough space for them.
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #12
-
- Member
- 18 posts
0
Neutral
Posted 10 January 2013 - 12:40
... and won't be bothering myself with swapfile. ;-)
By the way - is there any "Edit" button to change own posts?
By the way - is there any "Edit" button to change own posts?
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #13
-
- Forum Moderator
PLi® Core member - 27,495 posts
+397
Excellent
Posted 10 January 2013 - 14:59
The time to edit your own post is limited to 15 minutes I believe.... and won't be bothering myself with swapfile. ;-)
By the way - is there any "Edit" button to change own posts?
In urgent situations you can ask a moderator to change it for you.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen.
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #14
-
- PLi® Core member
- 14,055 posts
+298
Excellent
Posted 10 January 2013 - 15:28
... But 64 MB Flash it's not too much...
I'd strongly suggest refraining from crossing that bridge until you actually find it. You'll be surprised how many plugins will fit in that space. Using a flash extender will only slow things down. Free flash space does not contribute to performance (if it did, the dm8000 would be unparallelled).
Real musicians never die - they just decompose
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #15
-
- Member
- 18 posts
0
Neutral
Posted 20 January 2013 - 23:48
1. Pendrive === USB stick.
Stick it in, format it from the menu (if it doesn't already have a linux file system, which is required for picons), use it. When you download picons you will get the option to store them on the pendrive.
Flash extender is (afaik) only for the DM7025, which does suffer from lack of flash. The plugins you name (watch out with CrossEPG, you might get compatibility issues, for EPG import use Rytec's XMLTV toolkit instead) should not give a space problem.
I installed xmltvimport-rytec from plugin menu, restarted enigma, but can't see it anywhere. How to use that tool?
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #16
-
- Senior Member
- 1,573 posts
+33
Good
Posted 20 January 2013 - 23:58
You need both, so xmltvimport too, importer and sources
Edited by metoo, 20 January 2013 - 23:59.
ET10000 C C C C/T 2TB HDD ET7000 + ET6000 dvb-S OpenPli Triax 88 multifeed quad LNBs VU Uno4K SE C+2TB HDD Mutant HD60
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #17
-
- Member
- 18 posts
0
Neutral
Posted 21 January 2013 - 00:54
Aahh.. Thanks! I installed the other one too, and now I can see the new plugin. Downloaded all the data, and it seems to work nice.
Where the data is saved, as I can't see any path to set up? I wish I could save it on USB stick or HDD.
Where the data is saved, as I can't see any path to set up? I wish I could save it on USB stick or HDD.
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #18
-
- Senior Member
- 1,573 posts
+33
Good
Posted 21 January 2013 - 11:41
Data is always in memory, only saved to HDD with shutdown, and read back into memory with startup
ET10000 C C C C/T 2TB HDD ET7000 + ET6000 dvb-S OpenPli Triax 88 multifeed quad LNBs VU Uno4K SE C+2TB HDD Mutant HD60
Re: DM800HD se and OpenPLi 3.0 beta 20130109 #19
-
- Member
- 18 posts
0
Neutral
Posted 31 January 2013 - 17:06
And how can I use OLED picons?
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
