Hi!
I have a problem concerning the softcam (in my case mgcamd) on actual PLI images, regardless on what receiver (Vu+ and et-models).
The softcam suddenly stops running. I don't know why.
On 2.1 images I didn't have those problems.
Does anyone have the same problems??
How could I check the cause? Any logfiles?
cu
KJ
Softcam stops itself running
Started by kleinerjunge, 19 Jan 2013 22:04
27 replies to this topic
Re: Softcam stops itself running #2
-
- Senior Member
- 78 posts
0
Neutral
Posted 20 January 2013 - 11:20
the mg_cfg config file needs some settings changed also edit it and change
g = ( 33 )
k = ( 07 )
p = ( 02 )
b = ( 06 )
change the above settings and exit and save enter line and save then restart cam
g = ( 33 )
k = ( 07 )
p = ( 02 )
b = ( 06 )
change the above settings and exit and save enter line and save then restart cam
Re: Softcam stops itself running #3
-
- Member
- 9 posts
0
Neutral
Posted 21 January 2013 - 16:44
the mg_cfg config file needs some settings changed also edit it and change
g = ( 33 )
k = ( 07 )
p = ( 02 )
b = ( 06 )
change the above settings and exit and save enter line and save then restart cam
It did not solve the problem, I have the same problem
Re: Softcam stops itself running #4
-
- Member
- 22 posts
0
Neutral
Posted 21 January 2013 - 17:00
yeah those are my settings and problem still on.
Re: Softcam stops itself running #6
-
- Senior Member
- 167 posts
+1
Neutral
Posted 21 January 2013 - 19:07
Hi thanatoscy,
for me it has nothing to to with latest updates. The problem is there for a few weeks already!!
cu
KJ
for me it has nothing to to with latest updates. The problem is there for a few weeks already!!
cu
KJ
Re: Softcam stops itself running #7
-
- Member
- 9 posts
0
Neutral
Posted 22 January 2013 - 22:30
Hello!
Does anyone camide the exchange time in the Open plis?
Does anyone camide the exchange time in the Open plis?
Re: Softcam stops itself running #8
-
- Member
- 9 posts
0
Neutral
Posted 23 January 2013 - 11:43
can not delete or edit your posts also can not????
Edited by marek002, 23 January 2013 - 11:44.
Re: Softcam stops itself running #9
-
- Member
- 26 posts
+2
Neutral
Posted 24 January 2013 - 10:39
I can confirm this and there are several postings about this. No fix yet, it seems to be a very low priority to fix it... 
However, I think you should find that the softcam is indeed still running, but no video or audio. ECM:s still OK but no decoded stream.
This issue came with an update during the summer and have been present since then. Only PLi know what they did to "break" this. Who knows, some day maybe they will comment or even fix it....
However, I think you should find that the softcam is indeed still running, but no video or audio. ECM:s still OK but no decoded stream.
This issue came with an update during the summer and have been present since then. Only PLi know what they did to "break" this. Who knows, some day maybe they will comment or even fix it....
Re: Softcam stops itself running #10
-
- PLi® Core member
- 32,766 posts
+245
Excellent
Posted 24 January 2013 - 10:41
we are not aware of any changes which might cause mgcamd to stop working.
Re: Softcam stops itself running #11
-
- Senior Member
- 167 posts
+1
Neutral
Posted 24 January 2013 - 13:31
@loppnutte:
Do you know the last working PLI image from summer that didn't have this problem?
cu
KJ
Do you know the last working PLI image from summer that didn't have this problem?
cu
KJ
Re: Softcam stops itself running #12
-
- Member
- 22 posts
0
Neutral
Posted 24 January 2013 - 18:24
In my case when softcam plugin (autocam) switches to mgcamd it actually does not. mgcamd crashes for a reason. I reverted back to a backup i had from 13th Januray with all latest upgrades and now it is fine. The problem appeared on the 20th
Re: Softcam stops itself running #13
-
- Member
- 9 posts
0
Neutral
Posted 25 January 2013 - 02:10
I put a very old 2011 April pli image and it sofcam, mgcamd, camd CC, etc. do not work at the beginning of such work, and dies some time after.My receiver DM 800
Open Pli 2.1.
Open Pli 2.1.
Re: Softcam stops itself running #14
-
- Member
- 9 posts
0
Neutral
Posted 3 February 2013 - 21:14
Today crashed and could not exchange mgcamd cc camd, I put the original DM 800 image Dream Up program (DM 800) and then the Open PLI
now working again, why this cams change "die"?
now working again, why this cams change "die"?
Re: Softcam stops itself running #16
-
- Senior Member
- 185 posts
+11
Neutral
Posted 13 March 2013 - 13:25
Same problem here.
Not specific to cccam, mgcamd, or any other softcam. It also effects CA modules. And this happens on only PLi. I'm suffering this for months
Not specific to cccam, mgcamd, or any other softcam. It also effects CA modules. And this happens on only PLi. I'm suffering this for months
@kleinerjunge:
read my updated "story" : http://openpli.org/f...restart-needed/
/M
It all started with a BigBang...
Re: Softcam stops itself running #17
-
- Senior Member
- 185 posts
+11
Neutral
Posted 6 April 2013 - 12:10
Latest update, no change. After 40-50 zap all CAM's (softcams+ CI module) stops working, just black screen. I need to reboot. We need PLi dev's help.
It all started with a BigBang...
Re: Softcam stops itself running #18
-
- Senior Member
- 167 posts
+1
Neutral
Posted 19 June 2013 - 12:44
Is this problem still there or is it solved?
cu
KJ
Re: Softcam stops itself running #19
-
- Forum Moderator
PLi® Core member - 27,494 posts
+397
Excellent
Posted 20 June 2013 - 20:37
I don't think I've ever experienced this myselve but I'm sure you have. So I can't confirm this issue is gone.
Mijn schotel is een T90 met 10 LNB's. Daarnaast voor de fun nog een draaibaar systeem met een Triax TD 78.
Dreamboxen heb ik niet meer echt actief. Verder heb ik ook nog een een VU+ duo2 met 500Gb harddisk + een VU+ Uno, Zero, Solo 4K, Ultimo 4K, Zero 4K, Uno 4Kse. + ook nog een Xtrend ET7x00. Daarnaast heb ik ook nog diverse andere modellen w.o. een Formuler F4, ET8500, ET7500, Mut@nt 2400HD, Xsarius Fusion HD se en verder nog wel het e.e.a. waarmee op verzoek vanalles wordt getest. Iemand moet het tenslotte doen. 
Los van de eerder genoemde modellen heb ik nog wel een rits aan testsamples als Mut@nt 2400HD, HD60, GB UE4K, GB Trio4K, Maxitec Multibox combo en Twin, Octagon sf8008, sf8008 mini en last but nog least enkele modellen van het Grieks Duitse Edision.
Voor centrale opslag van media gebruik ik een Qnap 219P met tweemaal 2 Tb harddisks + een Synology DS414 met 12 Tb Totale opslag.
-------------------------------------------------------------------------------------------
Many answers to your question can be found in our wiki: Just one click away from this "solutioncentre".
Als ik alles al wist hoefde ik ook niets te vragen. If I had all the knowledge I had no questions at all.
Re: Softcam stops itself running #20
-
- Senior Member
- 185 posts
+11
Neutral
Posted 20 June 2013 - 21:30
I bought a VU+ Solo2 and sold Duo. Now I don't have this problem anymore. Weird...
It all started with a BigBang...
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users
