28 replies to this topic

[veskop]

Hi,I have 2 USB 3G modems (Huawei E173 and 3131) and I want to use one of them on my Xtrend ET5000.Is there allready a workig solution?All cheap non-linux receivers work with 3G modems,but our beloved xtrend seems have a problems....

[veskop]

Nobody?

[veskop]

Its not possible,or nobody know?

[Dimitrij]

Its not possible,or nobody know?

Use xmodem

Setup for linux find in Google.
There's no big deal.

[veskop]

Its not possible,or nobody know?

Use xmodem

Setup for linux find in Google.
There's no big deal.

Yes I saw your thread's, but I am talking about simple solution,not for linux guru

[veskop]

Tryed with xmodem,but connection failed.... Modem is Huawei e3131,drivers are installed,and box is rebooted...Settings from operator are OK....

 

 

Here is lsusb:

 

root@et5x00:~# lsusb- without modem
Bus 001 Device 002: ID 1bcf:0c31
Bus 002 Device 002: ID 1a40:0101
Bus 003 Device 002: ID 0403:6001
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 002 Device 003: ID dead:beef

root@et5x00:~# lsusb-with modem
Bus 001 Device 002: ID 1bcf:0c31
Bus 002 Device 002: ID 1a40:0101
Bus 003 Device 002: ID 0403:6001
Bus 001 Device 001: ID 1d6b:0002
Bus 002 Device 001: ID 1d6b:0002
Bus 003 Device 001: ID 1d6b:0001
Bus 004 Device 001: ID 1d6b:0001
Bus 002 Device 005: ID 12d1:14fe
Bus 002 Device 003: ID dead:beef
root@et5x00:~#
 

Edited by veskop, 26 March 2013 - 08:25.

[Dimitrij]

'usb_modeswitch params' -v 12d1 -p 14fe -V 12d1 -P 1506

 

connection xmodem

telnet:

dmesg >/tmp/dmesg.log

log here

[veskop]

'usb_modeswitch params' -v 12d1 -p 14fe -V 12d1 -P 1506

 

connection xmodem

telnet:

dmesg >/tmp/dmesg.log

log here

Here is ....

 

 

Picture of settings :

 

 

And log:

Attached Files

•  dmesg.log   11.04KB   18 downloads

Edited by veskop, 26 March 2013 - 09:18.

[Dimitrij]

'usb_modeswitch params' -R -c /etc/usb_modeswitch.conf

/etc/usb_modeswitch.conf

DefaultVendor=  0x12d1
 DefaultProduct= 0x14fe


 TargetVendor=  0x12d1
 TargetProduct= 0x1506

 MessageContent="55534243123456780000000000000011062000000100000000000000000000"

 

connection xmodem

telnet:

dmesg >/tmp/dmesg.log

log here

[veskop]

Setting :

 

 

log :

 

 

conf:

 

 

Attached Files

•  dmesg.log   11.01KB   8 downloads
•  usb_modeswitch.rar   204bytes   45 downloads

[Dimitrij]

The modem is defined as CD-ROM.

 

I advise you to buy a router that works with modems.
So it will be much easier.

[veskop]

The modem is defined as CD-ROM.

 

I advise you to buy a router that works with modems.
So it will be much easier.

I have another one...Huawei  e173

[Dimitrij]

if answer lsusb = 12d1:1446

/etc/usb_modeswitch.conf

 # Huawei E270+  (HSPA+ modem)
   DefaultVendor= 0x12d1
   DefaultProduct=0x1446

   TargetVendor=  0x12d1
   TargetProductList="1001,1406,140c,14ac"

   CheckSuccess=20

   MessageContent="55534243123456780000000000000011060000000000000000000000000000"

and unistall ftdi_sio,cdc_acm,pl2303

[veskop]

if answer lsusb = 12d1:1446

/etc/usb_modeswitch.conf

 # Huawei E270+  (HSPA+ modem)
   DefaultVendor= 0x12d1
   DefaultProduct=0x1446

   TargetVendor=  0x12d1
   TargetProductList="1001,1406,140c,14ac"

   CheckSuccess=20

   MessageContent="55534243123456780000000000000011060000000000000000000000000000"

and unistall ftdi_sio,cdc_acm,pl2303

Bus 002 Device 003: ID 12d1:1c05
 

[Dimitrij]

'use usb_modeswitch'  no

and unistall ftdi_sio,cdc_acm,pl2303

[veskop]

and unistall ftdi_sio,cdc_acm,pl2303

Sorry for stupid question,but how?

[Dimitrij]

driver ftdi_sio,cdc_acm,pl2303 remove

[veskop]

driver ftdi_sio,cdc_acm,pl2303 remove

root@et5x00:~# driver ftdi_sio,cdc_acm,pl2303 remove
-sh: driver: not found
 

[Dimitrij]

remove

/lib/modules/3.6.0/kernel/drivers/usb/serial/belkin_sa.ko

/lib/modules/3.6.0/kernel/drivers/usb/serial/pl2303.ko

/lib/modules/3.6.0/kernel/drivers/usb/serial/keyspan.ko

/lib/modules/3.6.0/kernel/drivers/usb/serial/ftdi_sio.ko

[veskop]

remove

/lib/modules/3.6.0/kernel/drivers/usb/serial/belkin_sa.ko

/lib/modules/3.6.0/kernel/drivers/usb/serial/pl2303.ko

/lib/modules/3.6.0/kernel/drivers/usb/serial/keyspan.ko

/lib/modules/3.6.0/kernel/drivers/usb/serial/ftdi_sio.ko

Now I get this error.... Tryed allso USB1,2,the same error...

 

 

Edited by veskop, 26 March 2013 - 12:59.