Posted 21 June 2013 - 14:22
Yes and DMIPS galore, whereas it's not as capable as it seems from such 4 figures, expressed in those terms... But we have seen not only Vu+ but also ET9K start with that etc.
Corporate jargon must be shown through, indeed... But Rome was not built in a day, so...
Posted 21 June 2013 - 14:38
But the building of Rome can hardly be compared with a home-theatre ...........
Posted 21 June 2013 - 19:34
Still, it's a highly complex operation... smaller scale than Rome, admittedly but... 
Posted 22 June 2013 - 13:20
I would prefer a good enigma2 box that can also run XBMC, instead of integrating TV functionality inside XBMC. With enough RAM it could be possible to run them both at the same time, making switching from one to another instant.
I am trying XBMC + enigma2 combination on HTPC but the enigma2pc part still isn't performing as a good STB.
Edited by malakudi, 22 June 2013 - 13:21.
Posted 22 June 2013 - 14:54
i think enigma2 is old and the graphic engine is too much poor.
It is time for something new and better.
Don't know if the future is Xbmc or something else. But it is time to go aehad.
Posted 22 June 2013 - 15:44
I agree, the users are getting more and more used to nice eye-candy and the modern boxes have an overkill of cpu power to drive those nice tinhgs!
@Camping: ZGemma H.2S, Technisat Multytenne 4-in-1 @Home: Edision Mini 4K, Wave Frontier T55, EMP Centauri EMP DiSEqC 8/1 switch, 4x Inverto Ultra Black single LNB
Posted 23 June 2013 - 07:37
I prefer functionality over eye-candy. I would only replace enigma2 if something new has all the functionality of enigma2.
Posted 23 June 2013 - 07:41
I prefer functionality over eye-candy. I would only replace enigma2 if something new has all the functionality of enigma2.
Exactly! Functionality is what it's all about; design should support that.
But looking at the markets (of all kinds of stuff) that's quite an old-fashioned point of view.....
Posted 23 June 2013 - 08:40
looking at the grafical eye candy/blingbling markets, there is a big market for an old-fashion functional point of vieuw
ET10000 C C C C/T 2TB HDD ET7000 + ET6000 dvb-S OpenPli Triax 88 multifeed quad LNBs VU Uno4K SE C+2TB HDD Mutant HD60
Posted 23 June 2013 - 08:48
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 23 June 2013 - 10:17
I prefer functionality over eye-candy. I would only replace enigma2 if something new has all the functionality of enigma2.
Then maybe the E2BMC project would suit you (and probably most others) more than Prismcube? There - unlike as in Psimcube - E2 is at least partly integrated into XBMC to handle the DVB part.
Posted 23 June 2013 - 10:56
I prefer functionality over eye-candy. I would only replace enigma2 if something new has all the functionality of enigma2.
In that case I'd like MythTV on my STB. I'm missing a lot of the functionality I had with Myth in E2.
Edited by bunbun, 23 June 2013 - 10:56.
Posted 23 June 2013 - 11:34
New boxes (Solo2, Duo2, Ruby) have transcoding and more... They are now quite capable, not only in terms of processor, flash and working memory but also the motherboard itself is powerful enough (South Bridge etc.), from what I understand - me being an IT lay person...
Now you can have 2 x HD PiP, as well and so on...
Posted 23 June 2013 - 16:59
Some are still using the neutrino way of remote control..... They never get used to the new stuff...
And what is wrong with that?
I even like NeutrinoHD 
it never crashes like enigma2 does, if a plugin is giving a segfault....
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the 
button on the buttom right of this message 
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 23 June 2013 - 17:09
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Posted 23 June 2013 - 23:17
Aan de rand van de afgrond is een stap voorwaarts niet altijd vooruitgang....
On the edge of the abyss, a step forward is not always progress....
Hardware: 2x Daily used Vu+ Ultimo 4K - Vu+ Duo 4K SE and a lot more.... - VisioSat BiBigsat - Jultec Unicable Multiswitch 4 positions: 19.2/23.5/28.2 East - Diseqc motorized flatdish antenna
Software : HomeBuild OpenPLi Develop and Scarthgap builds, local cards driven by OsCam
Press the button on the buttom right of this message
Have you tried our wiki yet? Many answers can be found in our OpenPLi wiki
Posted 12 July 2013 - 20:28
More information about the coming E2BMC box from Relook.
Specs:
Verwacht in Q3-2013
DVB-S2 Linux receiver
Powerful ARM Cortex - A9 superscalar 1500DMIPS CPU
Flash ROM: 256MB (NAND)
RAM: 512MB DDR2
1xDVB-S2 tuner (input freq.: 950 - 2150MHz)
Open Source, Linux operating system with integrated XBMC player
PiP Support
USB file system: FAT, FAT32, NTFS, ext2, ext3
Technical specifications
1xDVB-S2 tuner
1x Ethernet RJ-45 connector (10/100Mbit)
1x Smart Card Reader
3x USB 2.0 (2x at rear panel, 1x at front panel)
1x HDMI output
1x AV Cinch (CVBS + stereo audio)
1x Coaxial S/PDIF output
1x RS-232 connector
11-Digit VFD display on front panel
7-Keys on front panel
Power consumption: <25W
Features
Open source, Linux operating system with integrated XBMC player
DVB-S/DVB-S2 satellite compliant (MPEG-2/MPEG-4/H.264)
SD/HD channels decoding
DiSEqC 1.0/1.1/1.2/USALS support
DiSEqC for SCR LNB support (EN50494)
SCPC & MCPC receivable from Ku and C band satellites
Output resolution: 480p, 480i, 576p, 576i, 720p@50 or 60Hgz, 1080i@50 or 60Hz, 1080p@50 or 60Hz
Variable aspect ratio (4:3, 16:9) with Pan & Scan vector or Letter Box option
Audio decoding: MPEG-2 layer I and II, AAC and AAC-HE (AAC+), Dolby Digital (AC-3), MP3
Audio output mode: mono, dual-channel, stereo, left and right
Unlimited channel lists for TV and Radio
Multi-Language DVB Subtitle
PiP Support
PVR functionality (watching and recording two programs on the same transponder)
Time Shift when watching or recording
USB file system: FAT, FAT32, NTFS, ext2, ext3
Trick modes for player
Multi satellite search, network search, PID search, manual search and Multi-TP search
Multilingual OSD
True Color (32-bits) on screen display (OSD)
Timer support
7-days multilingual EPG (Electronic Program Guide)
Teletext output through VBI and OSD
Internet Radio
Specs provided by GT-Sat
Spec are subject to changes
http://www.itcetera....look-e2bmc.html
Edited by pop_eye, 12 July 2013 - 20:31.
Posted 12 July 2013 - 21:13
And one picture from Anga 2013.
Thanks E-D-S @ http://www.doume59.n...hp?topic=6159.0
photo15579.jpg 22.8KB
72 downloads
Edited by pop_eye, 12 July 2013 - 21:16.
Posted 13 July 2013 - 10:08
1xDVB-S2 tuner, no thx
VU+ Ultimo 4K - 78 Triax met triple Quad
Posted 20 July 2013 - 16:56
I would prefer a good enigma2 box that can also run XBMC, instead of integrating TV functionality inside XBMC. With enough RAM it could be possible to run them both at the same time, making switching from one to another instant.
I am trying XBMC + enigma2 combination on HTPC but the enigma2pc part still isn't performing as a good STB.
Have you tried the XBMC plugin listed on the Xtend forums.
http://www.et-view-s...ns-with-enigma2
This looks very promising and may even make the PrismCube an unnecessary box.
0 members, 5 guests, 0 anonymous users
