5 replies to this topic

[maigais]

 

 

 

 

or can be corrected enigma to operate all free STRIMS
  Similar to the image of the DMM,
screenshot shows EPG and Picone operates from references satellites

 

examples where everything works

 

#NAME MAY IPTV
#SERVICE 1:0:1:50E3:7:70:1680000:0:0:0:http%3a//91.224.68.5%3a9000/udp/239.20.0.17%3a1234:НТВ МИР
#DESCRIPTION НТВ МИР
#SERVICE 1:0:1:2A3A:8:70:1680000:0:0:0:http%3a//91.224.68.5%3a9000/udp/239.0.1.112%3a1234:Первый
#DESCRIPTION Первый
#SERVICE 1:0:1:6ac:3138:13e:820000:0:0:0:http%3a//91.224.68.5%3a9000/udp/239.10.0.42%3a1234:РТР-Планета
#DESCRIPTION РТР-Планета

 

Examples of which do not work

 

#SERVICE 1:0:1:794A:136:70:1680000:0:0:0:http%3a//91.224.68.5%3a9000/udp/239.10.0.37%3a1234:СТС
#DESCRIPTION СТС
#SERVICE 1:0:1:277B:1:70:1680000:0:0:0:http%3a//91.224.68.5%3a9000/udp/239.0.1.58%3a1234:РЕН ТВ
#DESCRIPTION РЕН ТВ

Attached Files

•  stream.jpg   80.18KB   136 downloads
•  eror.jpg   68.06KB   127 downloads

Edited by maigais, 13 April 2013 - 10:09.

[betacentauri]

Both stream don't work here at the moment. But I don't think that it is an enigma2 problem, because it also don't work with VLC player.

And I can open connection via telnet, but remote site closes connection within 1 second:

~$ telnet 91.224.68.5 9000
Trying 91.224.68.5...
Connected to 91.224.68.5.
Escape character is '^]'.
Connection closed by foreign host.

 

From the error message I would suggest, that sid in service reference is wrong (and for this there's the patch in the other thread). But I cannot check it without to be able to watch stream. Or can you post a dvbsnoop of pid 0?

 

 

 

[betacentauri]

I mean this:

dvbsnoop -s ts -if <file.ts> -tssubdecode 0

The output of 1 full pat packet would be enough. But you need a ts file for this...

[maigais]

do with the rest of the url and it will be the same!!

Therefore, I am trying to compile the image of
in order to perform the test with the patch
but git error trace halfway 

 

 

Both stream don't work here at the moment. But I don't think that it is an enigma2 problem, because it also don't work with VLC player.

And I can open connection via telnet, but remote site closes connection within 1 second:

~$ telnet 91.224.68.5 9000
Trying 91.224.68.5...
Connected to 91.224.68.5.
Escape character is '^]'.
Connection closed by foreign host.

 

From the error message I would suggest, that sid in service reference is wrong (and for this there's the patch in the other thread). But I cannot check it without to be able to watch stream. Or can you post a dvbsnoop of pid 0?

[betacentauri]

I can't open http://239.10.0.37:1234/ or udp://239.10.0.37:1234/ with telnet or VLC player.

 

Without ts file, dvbsnoop log or access to stream, I cannot help here.

 

If you have a new enigma2 binary with the patch, you'll have to set sid to 0. Means use instead of

#SERVICE 1:0:1:794A:136:70:1680000:0:0:0:http%3a//91.224.68.5%3a9000/udp/239.10.0.37%3a1234:СТС

this service reference:

#SERVICE 1:0:1:0:136:70:1680000:0:0:0:http%3a//91.224.68.5%3a9000/udp/239.10.0.37%3a1234:СТС

[maigais]

Thank you very much, that was attended by the renewals
everything works

Attached Files

•  stream.jpg   147.25KB   54 downloads