DM8000 problem with latest builds (18.04.13 )
clweb 19 Apr 2013
After problem with update from 18/04/13, I reinstalled a backup from 15/04. It worded fine.
Today (19/04) I tried an update: a warning about instabilities was daisplayed. I sarted the update anyway.
After reboot a big ERROR was displayed on the box diaplay. The only way to get control again was to reflash with an older
image using Dreamup serial.
What I will try is to tranfer the new image (19/04) to the box instead of an update to see if the build is corrupt,
or if something wrong in the update process.
clweb 19 Apr 2013
Yes the problem is with the updates. I installed the 190413 image and the DM8000 booted without problem.
As I was on teh way, I installed my pugins and all run without problem: reboot and enigma restart all OK.
As all seems to run stable, I will stay with that image. Sometimes it's good to restart from new.
Persian Prince 19 Apr 2013
if we ignore updating from previous versions can you confirm installing a fresh image (20130419) is ok or not ?
jakey 19 Apr 2013
Yes I can confirm that on my 8000 all is ok and thanks for the native ubifs, Dreambox needs it.
Edited by jakey, 19 April 2013 - 10:59.
Persian Prince 19 Apr 2013
great at least we have UBIFS , what about boot speed ?
i think it's a normal situation that we can't update from previous versions
what about
dm500hd
dm800se
dm7020hd
anybody tried ?
Edited by Persian Prince, 19 April 2013 - 10:59.
jakey 19 Apr 2013
I've install a few plugins now and changed the skin and boot time is great, from power off to picture on screen is 1m 25s which is fantastic
gjstroom 19 Apr 2013
DM800se also does not boot, it says in display:
dhcp...
x-3.2-dm800se.gz
Serial log:
BCM74130011 012 K1 K2 K3 K4 K5 Shmoo Version=3.8 DDR Freq=0x0000018C %00000001% RC1=00000004 WC1=FFFFFFEB RC2=00000016 WC2=0000000F RC3=0000000D WC3=FFFFFFEA RC4=0000000D WC4=00000037 NWC=00000010 RC5=00000005 WC5=00000010 RC6=00000015 WC6=00000010 NRC=0000000D RW=00000011 WW=0000004E G=00000000 R=0000000D W=00000010 BL=00000000 RC1=00000004 RC2=00000013 BL=00000001 RC1=00000004 RC2=00000013 BL=00000002 RC1=00000003 RC2=00000012 BL=00000003 RC1=00000003 RC2=00000015 BL=00000004 RC1=00000003 RC2=00000014 BL=00000005 RC1=00000006 RC2=00000015 BL=00000006 RC1=00000004 RC2=00000013 BL=00000007 RC1=00000005 RC2=00000016 3 COPY CODE COMPARE CODE 4567 (c) 2007,2008 Dream Multimedia GmbH. All rights reserved. Dreambox DM800SE FIRST STAGE 1.0/400 {BO23456} 2ND STAGE OK, build #84 (2011-09-01) 0.000 - BCM board setup 0.000 - fp init 0.000 - ca init 0.513 - load config dCA: not existent, loading defaults 0.540 - config loaded. * press [S] to enter setup OLED found! color oled reset lcd: BOOT #84 P23 detected! - read config file: /boot/secondstage.conf detected jffs2 blocksize: 16kb +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ +++++++++++++++++++++++++++++++++++++++++++++++++++++++++UUUUUU UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU dreamupd initialized Scanning JFFS2 FS: . | / - \ | / - \ | / - done. find_inode failed for name=secondstage.conf load: Failed to find inode - failed to open /boot/secondstage.conf - failed to open /cf/autorun.bat lcd: /boot/bootlogo-dm800se.elf.gz bootlogo size: 72884 Supported modes: NTSC !NTSC_J !NTSC_443 !PAL_B !PAL_B1 !PAL_D !PAL_D1 PAL_G !PAL _H !PAL_K !PAL_I !PAL_M !PAL_N !PAL_NC !PAL_60 !SECAM_L !SECAM_B !SECAM_G !SECAM _D !SECAM_K !SECAM_H 1080i !1080p 720p 480p 1080i_50Hz !1080p_50Hz !1250i_50Hz 7 20p_50Hz 576p_50Hz DVI_640x480p !DVI_640x480p_CVT DVI_800x600p DVI_1024x768p !DV I_1280x720p_50Hz !DVI_1280x720p !DVI_1280x720p_Red !DVI_640x480p_66Hz !DVI_640x4 80p_70Hz !DVI_640x480p_72Hz !DVI_640x480p_75Hz !DVI_640x480p_85Hz !DVI_1280x720p _70Hz !DVI_1280x720p_72Hz !DVI_1280x720p_75Hz !DVI_1280x720p_85Hz !DVI_1920x1080 p_60Hz_Red !Custom0 !Custom1 best supported mode is 25 using 1920x1080i (50.00 Hz) HDMI using colorspace: 1 create surface 1920 1080 Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail lard.org> parsing JPEG header.. Virtual FB Size: 1280x720 lcd: /boot/vmlinux-3.2-dm800se.gz BCM74130011 012 K1 K2 K3 K4 K5 Shmoo Version=3.8 DDR Freq=0x0000018C %00000001% G=00000000 R=00000000 W=00000000 00000010 K6 F
Edited by gjstroom, 19 April 2013 - 11:10.
gjstroom 19 Apr 2013
@gjstroom
did you try fresh install of 20130419 ?
Yes, fresh install.
When I go back to 0418 all OK again.
Edited by gjstroom, 19 April 2013 - 11:16.
Persian Prince 19 Apr 2013
as far as i know DMM is using SQUASHFS for dm500hd and dm800se
dm500hd example :
http://git.opendream...96166;hb=master
http://git.opendream...b5b3d;hb=master
http://git.opendream...39f8c;hb=master
http://git.opendream...7dd2b;hb=master
dreambox-squashfs-support_0.1-r1_all.ipk
Edited by Persian Prince, 19 April 2013 - 11:19.
pieterg 19 Apr 2013
These boxes have less than 60MB available for their rootfs.It seems on 800SE and 500SE DMM doesn't support UBIFS... (yet?)....
If we would enable UBIFS for them, you'd have less than 5MB free in a clean OpenPLi rootfs, without having installed any plugins.
ManoloSat 19 Apr 2013
Hello
I wanted to know if I can upgrade from a remote control or dm7020hd still does not work?
Thanks to all
migrato 20 Apr 2013
jakey 20 Apr 2013
Just now I have nervously performed 'opkg update && opkg upgrade' to the 'OpenPLi-3.0-beta-dm8000-20130419' I installed yesterday, it was quite a big update with around 30 kernel modules plus plugins, pleased to report the upgrade went without issue.
Yes I can confirm that on my 8000 all is ok and thanks for the native ubifs, Dreambox needs it.
Mikelima69 20 Apr 2013
I flashed with the nfi 19.04.2013 reinstalled plugins. everything works.
I also run an update on 20.04.2013. no problem.
Good weekend
Beriet 20 Apr 2013
Zojuist flash 20 april 2013 op mijn DM8000 erin en...perfect werkend alles.