69 replies to this topic

[clweb]

After problem with update from 18/04/13, I reinstalled a backup from 15/04. It worded fine.

Today (19/04) I tried an update: a warning about instabilities was daisplayed. I sarted the update anyway.

After reboot a big ERROR was displayed on the box diaplay. The only way to get control again was to reflash with an older

image using Dreamup serial.

 

What I will try is to tranfer the new image (19/04) to the box instead of an update to see if the build is corrupt,

or if something wrong in the update process.

 

[dirocca]

updates were bad

fix is on the way

 

grtzPhilip

[clweb]

Yes the problem is with the updates. I installed the 190413 image and the DM8000 booted without problem.

As I was on teh way, I installed my pugins and all run without problem: reboot and enigma restart all OK.

As all seems to run stable, I will stay with that image. Sometimes it's good to restart from new.

[Persian Prince]

if we ignore updating from previous versions can you confirm installing a fresh image (20130419) is ok or not ?

[jakey]

Yes I can confirm that on my 8000 all is ok  and thanks for the native ubifs, Dreambox needs it.

Edited by jakey, 19 April 2013 - 10:59.

[Persian Prince]

great at least we have UBIFS , what about boot speed ?

 

i think it's a normal situation that we can't update from previous versions

 

what about

 

dm500hd

dm800se

dm7020hd

 

anybody tried ?

Edited by Persian Prince, 19 April 2013 - 10:59.

[jakey]

I've install a few plugins now and changed the skin and boot time is great, from power off to picture on screen is 1m 25s which is fantastic

[gjstroom]

DM800se also does not boot, it says in display:

 

dhcp...

x-3.2-dm800se.gz

 

Serial log:

 

BCM74130011
012
K1
K2

K3

K4

K5

Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
RC1=00000004
WC1=FFFFFFEB
RC2=00000016
WC2=0000000F
RC3=0000000D
WC3=FFFFFFEA
RC4=0000000D
WC4=00000037
NWC=00000010
RC5=00000005
WC5=00000010
RC6=00000015
WC6=00000010
NRC=0000000D
RW=00000011
WW=0000004E
G=00000000 R=0000000D W=00000010
BL=00000000
RC1=00000004
RC2=00000013

BL=00000001
RC1=00000004
RC2=00000013

BL=00000002
RC1=00000003
RC2=00000012

BL=00000003
RC1=00000003
RC2=00000015

BL=00000004
RC1=00000003
RC2=00000014

BL=00000005
RC1=00000006
RC2=00000015

BL=00000006
RC1=00000004
RC2=00000013

BL=00000007
RC1=00000005
RC2=00000016
3
COPY CODE
COMPARE CODE
4567
(c) 2007,2008 Dream Multimedia GmbH. All rights reserved.
Dreambox DM800SE

FIRST STAGE 1.0/400 {BO23456}

2ND STAGE OK, build #84 (2011-09-01)

0.000  - BCM board setup
0.000  - fp init
0.000  - ca init
0.513  - load config
dCA: not existent, loading defaults
0.540  - config loaded.
 * press [S] to enter setup
OLED found!
color oled reset
lcd: BOOT #84
P23 detected!
 - read config file: /boot/secondstage.conf
detected jffs2 blocksize: 16kb
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++UUUUUU
UUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU
dreamupd initialized
Scanning JFFS2 FS:   .  | / - \ | / - \ | / -  done.
find_inode failed for name=secondstage.conf
load: Failed to find inode
 - failed to open /boot/secondstage.conf
 - failed to open /cf/autorun.bat
lcd: /boot/bootlogo-dm800se.elf.gz
bootlogo size: 72884
Supported modes: NTSC !NTSC_J !NTSC_443 !PAL_B !PAL_B1 !PAL_D !PAL_D1 PAL_G !PAL
_H !PAL_K !PAL_I !PAL_M !PAL_N !PAL_NC !PAL_60 !SECAM_L !SECAM_B !SECAM_G !SECAM
_D !SECAM_K !SECAM_H 1080i !1080p 720p 480p 1080i_50Hz !1080p_50Hz !1250i_50Hz 7
20p_50Hz 576p_50Hz DVI_640x480p !DVI_640x480p_CVT DVI_800x600p DVI_1024x768p !DV
I_1280x720p_50Hz !DVI_1280x720p !DVI_1280x720p_Red !DVI_640x480p_66Hz !DVI_640x4
80p_70Hz !DVI_640x480p_72Hz !DVI_640x480p_75Hz !DVI_640x480p_85Hz !DVI_1280x720p
_70Hz !DVI_1280x720p_72Hz !DVI_1280x720p_75Hz !DVI_1280x720p_85Hz !DVI_1920x1080
p_60Hz_Red !Custom0 !Custom1
best supported mode is 25
using 1920x1080i (50.00 Hz)
HDMI
using colorspace: 1
create surface 1920 1080
Using the Small jpeg decoder library, Copyright (c) 2006, Luc Saillard <luc@sail
lard.org>
parsing JPEG header..
Virtual FB Size: 1280x720
lcd: /boot/vmlinux-3.2-dm800se.gz

BCM74130011
012
K1
K2

K3

K4

K5

Shmoo Version=3.8
DDR Freq=0x0000018C
%00000001%
G=00000000 R=00000000 W=00000000 00000010
K6
F

Edited by gjstroom, 19 April 2013 - 11:10.

[Persian Prince]

@gjstroom

 

did you try fresh install of 20130419 ?

[littlesat]

It seems on 800SE and 500SE DMM doesn't support UBIFS... (yet?)....

[gjstroom]

@gjstroom

 

did you try fresh install of 20130419 ?

Yes, fresh install.

When I go back to 0418 all OK again.

Edited by gjstroom, 19 April 2013 - 11:16.

[Persian Prince]

as far as i know DMM is using SQUASHFS for dm500hd and dm800se

 

dm500hd example :

 

http://git.opendream...96166;hb=master

http://git.opendream...b5b3d;hb=master

http://git.opendream...39f8c;hb=master

http://git.opendream...7dd2b;hb=master

 

dreambox-squashfs-support_0.1-r1_all.ipk

Edited by Persian Prince, 19 April 2013 - 11:19.

[pieterg]

It seems on 800SE and 500SE DMM doesn't support UBIFS... (yet?)....

These boxes have less than 60MB available for their rootfs.
If we would enable UBIFS for them, you'd have less than 5MB free in a clean OpenPLi rootfs, without having installed any plugins.

[ManoloSat]

Hello
I wanted to know if I can upgrade from a remote control or dm7020hd still does not work?
Thanks to all

[littlesat]

I suggest you need to reflash....

[ManoloSat]

I suggest you need to reflash....

Thanks

[migrato]

Well. I just have updated my dm800se and got the big error on the box screen. I should have read this before. I guess I will have to make a fresh flashing for tomorrow.

[jakey]

Just now I have nervously performed 'opkg update && opkg upgrade' to the 'OpenPLi-3.0-beta-dm8000-20130419' I installed yesterday, it was quite a big update with around 30 kernel modules plus plugins, pleased to report the upgrade went without issue.

 

 

Yes I can confirm that on my 8000 all is ok  and thanks for the native ubifs, Dreambox needs it.

[Mikelima69]

hello,
I flashed with the nfi 19.04.2013 reinstalled plugins. everything works.
I also run an update on 20.04.2013. no problem.
Good weekend

[Beriet]

Zojuist flash 20 april 2013 op mijn DM8000 erin en...perfect werkend alles.