Hi all,
today i made a fresh install of my et9x00 with the last nightly build.
After the manual install of kernel module gor the A867 dvb-t key (kernel module 9035 and the dependences) the decoder stalled during the reboot.
This is the log:
usb 1-1.2: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state usbcore: registered new interface driver dvb_usb_af9035 usb 1-1.4: dvb_usb_v2: found a 'AVerMedia HD Volar (A867)' in warm state usb 1-1.2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer DVB: registering new adapter (AVerMedia HD Volar (A867)) usb 1-1.4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer DVB: registering new adapter (AVerMedia HD Volar (A867)) i2c i2c-4: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0 usb 1-1.2: DVB: registering adapter 1 frontend 0 (Afatech AF9033 (DVB-T))... i2c i2c-5: af9033: firmware version: LINK=12.13.15.0 OFDM=6.20.15.0 usb 1-1.4: DVB: registering adapter 2 frontend 0 (Afatech AF9033 (DVB-T))... mxl5007t 4-0060: creating new instance mxl5007t 5-0060: creating new instance Console: switching to colour dummy device 80x25 Registered IR keymap rc-empty Registered IR keymap rc-empty input: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.0/usb1/1-1/1-1.2/rc/rc0/input3 input: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.0/usb1/1-1/1-1.4/rc/rc1/input4 rc0: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.0/usb1/1-1/1-1.2/rc/rc0 usb 1-1.2: dvb_usb_v2: schedule remote query interval to 500 msecs usb 1-1.2: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected rc1: AVerMedia HD Volar (A867) as /devices/platform/ehci-brcm.0/usb1/1-1/1-1.4/rc/rc1 usb 1-1.4: dvb_usb_v2: schedule remote query interval to 500 msecs usb 1-1.4: dvb_usb_v2: 'AVerMedia HD Volar (A867)' successfully initialized and connected platform dvb0.0: DVB: registering adapter 0 frontend 2 (vtuner)... platform dvb0.0: DVB: registering adapter 0 frontend 3 (vtuner)...
