Hier nu ook, stom van mij maar ik had een typefoutje ik had db staan i.p.v dB in 1 regel.
Update PD1loi-HD-full HD skin.
Re: Update PD1loi-HD-full HD skin. #161
Re: Update PD1loi-HD-full HD skin. #162
Posted 22 February 2014 - 10:05
enigma2-plugin-skins-pd1loi-hd-full-hd_2.3_all.ipk 3.78MB 43 downloads Alle aanpassingen weer doorgevoerd ook zoals hierboven is beschreven de % dB omwisseling. Beide skins staan er weer in HD en Full HD.
suc6
Re: Update PD1loi-HD-full HD skin. #163
Posted 23 February 2014 - 09:17
enigma2-plugin-skins-pd1loi-hd-full-hd_2.3_all.ipk 3.78MB 70 downloads Alle aanpassingen weer doorgevoerd ook zoals hierboven is beschreven de % dB omwisseling. Beide skins staan er weer in HD en Full HD.
suc6
Paar kleine typefoutjes in versie HD weg gewerkt. enigma2-plugin-skins-pd1loi-hd-full-hd_2.3_all.ipk 3.78MB 70 downloads
Re: Update PD1loi-HD-full HD skin. #164
Re: Update PD1loi-HD-full HD skin. #165
Re: Update PD1loi-HD-full HD skin. #166
Re: Update PD1loi-HD-full HD skin. #167
Posted 15 March 2014 - 08:21
Hallo,
Het weerbericht in de skin verandert niet, pas als je een reboot geeft, wordt deze weer geactualiseerd.
Maar om steeds te moeten rebooten om het juiste weerbeeld te bekijken, lijkt mij niet goed.
Is dit euvel bekend?
Het blijft wel de mooiste skin.
Altobelli
Het vreemde is dat ik hier weinig aan kan doen. dat is bij mij ook zo,misschien moet er iets veranderd worden in python maar daar heb ik geen kennis van
Re: Update PD1loi-HD-full HD skin. #168
Posted 15 March 2014 - 09:11
Is er al een aanpassing gemaakt beteeffende de numberzap?
Nee nog niet maar is er ook bekent wat er veranderd is waar ik dat kan vinden? dan kan ik ook die aanpassing maken.Wel vreemd om zoiets te doen vind ik.
Bij PLi-hd is dit veranderd..
de regel met de - ervoor oud
met + ervoor nieuw.
<!-- Numberzap --> <screen name="NumberZap" position="center,center" size="250,60" title="Channel"> - <widget name="channel" position="35,15" size="110,25" font="Regular;23" /> - <widget name="number" position="145,15" size="80,25" halign="right" font="Regular;23" /> + <widget source="channel" render="Label" position="35,15" size="110,25" font="Regular;23" /> + <widget source="number" render="Label" position="145,15" size="80,25" halign="right" font="Regular;23" /> </screen>
Edited by DeBeek, 15 March 2014 - 09:12.
Vu+DUO4K, (DVB-C FBC & DVB-S2X FBC twin tuner), OpenPLi Nightly Build, My-FullNightHD skin, Bluetooth remote,
2x Synology DS-116, 16 Gb USB3, Autotimer, Bitrate, EPG-Import, Ziggo Kabel-tv, Astra 28.2.
Re: Update PD1loi-HD-full HD skin. #169
Posted 15 March 2014 - 09:21
Gevonden en weer bijgewerkt. enigma2-plugin-skins-pd1loi-hd-full-hd_2.3a_all.ipk 3.82MB 53 downloads
En voor wie alleen de skin.xml al goed is hier de skin file's skin-full HD.rar 40.08KB 31 downloads skin-HD.rar 38.23KB 22 downloads
Edited by Loui (PD1LOI), 15 March 2014 - 09:24.
Re: Update PD1loi-HD-full HD skin. #170
Posted 15 March 2014 - 09:42
Ondertussen heb ik backwards compatibiliteit ingebouwd.... Dan maar een klein beetje dubbel.... ben bang dat er zo veel skins omvallen die nooit aangepast gaan worden. Helaas het is niet anders in E2... skin en code is teveel verweven...
Edited by littlesat, 15 March 2014 - 09:44.
WaveFrontier 28.2E | 23.5E | 19.2E | 16E | 13E | 10/9E | 7E | 5E | 1W | 4/5W | 15W
Re: Update PD1loi-HD-full HD skin. #171
Posted 18 March 2014 - 14:02
Just installed this and must sat it's looking good... But I have one problem, the gui is too big for my screen, why is that? Any settings I can change to fix this? (i.e. it is too wide..)
btw, my TV is capable of 1080p and that is what I am using....
Regards,
BTJ
Edited by bjorntj, 18 March 2014 - 14:05.
Re: Update PD1loi-HD-full HD skin. #172
Posted 18 March 2014 - 15:08
Actually I see the height is a bit too much as well but it's not so distinct as the width....
BTJ
Re: Update PD1loi-HD-full HD skin. #173
Posted 19 March 2014 - 13:36
Just installed this and must sat it's looking good... But I have one problem, the gui is too big for my screen, why is that? Any settings I can change to fix this? (i.e. it is too wide..)
btw, my TV is capable of 1080p and that is what I am using....
Regards,
BTJ
The skin is not too big, you have your TV set is not 16:9 but full zoom.
Attached Files
Edited by Loui (PD1LOI), 19 March 2014 - 13:39.
Re: Update PD1loi-HD-full HD skin. #174
Posted 19 March 2014 - 13:44
Just installed this and must sat it's looking good... But I have one problem, the gui is too big for my screen, why is that? Any settings I can change to fix this? (i.e. it is too wide..)
btw, my TV is capable of 1080p and that is what I am using....
Regards,
BTJ
The skin is not too big, you have your TV set is not 16:9 but full zoom. 1_0_16_17B3_C82_3_EB0000_0_0_0.jpg 129.68KB 46 downloads
Re: Update PD1loi-HD-full HD skin. #175
Posted 19 March 2014 - 15:26
Why haven't I problems with other skins then? The aspect ratio on my TV is set to 16:9, not sure what else to configure?
BTJ
Re: Update PD1loi-HD-full HD skin. #176
Posted 19 March 2014 - 15:36
Well, If I choose just the HD versjon of the skin and not Full-HD then the skin fits...
BTJ
Re: Update PD1loi-HD-full HD skin. #177
Re: Update PD1loi-HD-full HD skin. #178
Posted 19 March 2014 - 16:04
Than your TV uses some form of overscan: http://en.wikipedia.org/wiki/Overscan and you're not seeing the full 1920x1080 image.
Check your tv for settings like: full screen view (Samsung) or something alike, that gives you the full size of the 1920x1080 image.
Then you will see that the Full-HD skin fits like a glove.
ET10K user i.c.w. Samsung UE40B6000 LED HDTV. ET9K alas not functioning anymore.
Re: Update PD1loi-HD-full HD skin. #179
Posted 19 March 2014 - 16:15
Why haven't I problems with other skins then? The aspect ratio on my TV is set to 16:9, not sure what else to configure?
Well, If I choose just the HD versjon of the skin and not Full-HD then the skin fits...
In almost all flatscreen TV's you can disable overscan. Sometimes you have to look a bit in the TV's menu, since every vendor uses a different name for it. If you let us know what brand and model you have, we may be able to help you. Overscan is bad because it not only costs you 5-10% of the visible screen area, it also makes your TV zoom the picture (because it has cut the edges off), so you're losing resolution and detail.
Some skins, especially the non-HD versions, take overscan into account by leaving the edge free. Modern HD skins don't. they expect you do have overscan disabled (which is something that was needed 20 years ago with a CRT, but is complete rubbish with today's technology).
Currently in use: VU+ Duo 4K (2xFBC S2), VU+ Solo 4K (1xFBC S2), uClan Usytm 4K Ultimate (S2+T2), Octagon SF8008 (S2+T2), Zgemma H9.2H (S2+T2)
Due to my bad health, I will not be very active at times and may be slow to respond. I will not read the forum or PM on a regular basis.
Many answers to your question can be found in our new and improved wiki.
Re: Update PD1loi-HD-full HD skin. #180
Posted 19 March 2014 - 16:43
Ok, I see my knowledge is not up to standard here... My tv is a LG 42LM670T-ZA and appreciate your help... I will also take a look in the manual and see if I can find any information about overscan....
BTJ
3 user(s) are reading this topic
0 members, 3 guests, 0 anonymous users