Jump to content


Photo

Update PD1loi-HD-full HD skin.

Started by Loui (PD1LOI), 23 Jun 2013 14:08

  • Please log in to reply
709 replies to this topic

Re: Update PD1loi-HD-full HD skin. #601 Loui (PD1LOI)

  • Senior Member
  • 4,642 posts

+150
Excellent

Posted 17 April 2016 - 18:06

Wie kan mij op weg helpen met de achtergrond transparant te maken, de desbetreffende png is transparant en in de skin staat ook dat de background op transparant.

En toch blijft de achtergrond zwart. Zie hier het zonnetje Attached File  1_0_19_4AED_840_600_FFFF0000_0_0_01.jpg   10.82KB   6 downloads

<widget alphatest="blend" position="1197,31" render="MSNWeatherPixmap" size="72,72" source="session.MSNWeather" zPosition="1" transparent="0">
  <convert type="MSNWeather">weathericon,current,/usr/share/enigma2/weather_icons/,png</convert>
</widget>

 

De plugin is van WeatherPlugin die hierboven is geplaatst.


Edited by Loui (PD1LOI), 17 April 2016 - 18:10.

Re: Update PD1loi-HD-full HD skin. #602 k661

  • Member
  • 3 posts

0
Neutral

Posted 17 April 2016 - 18:31

Try:

<widget alphatest="blend" position="1197,31" render="MSNWeatherPixmap" size="72,72" source="session.MSNWeather" zPosition="1" transparent="1">

  <convert type="MSNWeather">weathericon,current,/usr/share/enigma2/weather_icons/,png</convert>

</widget>


Re: Update PD1loi-HD-full HD skin. #603 Loui (PD1LOI)

  • Senior Member
  • 4,642 posts

+150
Excellent

Posted 17 April 2016 - 19:08

Het maakt in dit geval niet uit verschil tussen true/false.

Edited by Loui (PD1LOI), 17 April 2016 - 19:09.

Re: Update PD1loi-HD-full HD skin. #604 hajosch

  • Senior Member
  • 28 posts

0
Neutral

Posted 17 April 2016 - 19:38

hi Loui
deed alles wat er in het forum.
er gebeurt niets. (zie Foto).

 

Attached Files


Re: Update PD1loi-HD-full HD skin. #605 mimoun01

  • Senior Member
  • 71 posts

0
Neutral

Posted 17 April 2016 - 19:46

hi BHA loui al niet slecht weer zal niet aanwezig zijn ernstige zwarte achtergrond beter dan woordjes ... weericoon animeren zou niet deze posible huh kwetsen ........


Re: Update PD1loi-HD-full HD skin. #606 Loui (PD1LOI)

  • Senior Member
  • 4,642 posts

+150
Excellent

Posted 17 April 2016 - 20:52

hi Loui
deed alles wat er in het forum.
er gebeurt niets. (zie Foto).


De skin die jij laat zien moet je verwijderen van je box,en versie 1.1 installeren.

Re: Update PD1loi-HD-full HD skin. #607 digiclown

  • Member
  • 3 posts

0
Neutral

Posted 17 April 2016 - 23:32

Jammer werkt bij mij dus niet op mijn et8000

zie hier;

OpenPLi Enigma2 crash log

crashdate=zo apr 17 23:58:46 2016
compiledate=Apr 15 2016
skin=PD1LOI-Full-HD/skin.xml
sourcedate=2016-04-14
branch=(no branch)
rev=36989a1
component=Enigma2

stbmodel=et8000
stbmodel=dm800se
kernelcmdline=ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M bmem=360M@512M memc1=768M console=null
nimsockets=NIM Socket 0:
imageissue=openpli 4 %h


< 74651.165> [HardwareInfo] Scanning hardware info
< 74651.167> Detected: et8000 (94-2)
< 74651.175> [Harddisk] enumerating block devices...
< 74651.182> [Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
< 74651.182> [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sdb')
< 74651.813> [NimManager] Reading satellites.xml
< 74652.011> [NimManager] Reading cables.xml
< 74652.012> [NimManager] Reading terrestrial.xml
< 74652.235> [SecConfigure] sec config cleared
< 74652.236> [SecConfigure] slot: 0 configmode: advanced
< 74652.239> [SecConfigure] add 130 to 5
< 74652.240> [SecConfigure] add 192 to 3
< 74652.240> [SecConfigure] add 194 to 3
< 74652.241> [SecConfigure] add 235 to 2
< 74652.242> [SecConfigure] add 282 to 1
< 74652.270> [SecConfigure] sec config completed
< 74652.329> [Picon] adding path: /picon/
< 74652.747> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 74653.411> Unknown device type: front panel
< 74653.423> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 74653.456> Activating keymap: Default (US)
< 74653.457> [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
< 74653.459> Activating language Nederlands
< 74653.726> --> setting scaler_sharpness to: 0000000D
< 74653.884> [keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
< 74653.887> [ePopen] command: ip -o addr show dev eth0
< 74653.994> Plugin  Extensions/MyMetrixLite failed to load: No module named plugin
< 74653.994> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/MyMetrixLite
< 74655.593> getFPVersion failed!
< 74655.603> Plugin  Extensions/WebInterface failed to load: No module named plugin
< 74655.604> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
< 74655.625> [AudioSync] fallback to default translation for  Audio Sync Setup
< 74655.627> [AudioSync] fallback to default translation for  Setup for the Audio Sync Plugin
< 74655.630> [AudioSync] fallback to default translation for  Audio Sync
< 74655.633> [AudioSync] fallback to default translation for  sets the Audio Delay (LipSync)
< 74655.644> [MovieCut] set language to  nl
< 74655.646> [MovieCut] set language to  nl
< 74655.649> [MovieCut] fallback to default Enigma2 Translation for Execute cuts...
< 74655.945> [NetworkBrowser] fallback to default translation for Attempt to mount shares again
< 74655.953> [VideoHardware] getModeList for port DVI-PC
< 74655.954> [VideoHardware] remove DVI-PC because of not existing modes
< 74655.954> [VideoHardware] getModeList for port Scart
< 74655.955> [VideoHardware] getModeList for port YPbPr
< 74655.956> [VideoHardware] getModeList for port Scart
< 74655.959> [VideoHardware] getModeList for port DVI
< 74655.962> [VideoHardware] hotplug on dvi
< 74655.963> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.965> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.967> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.969> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.971> [VideoHardware] setMode - port: DVI mode: 1080i rate: multi
< 74655.973> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74656.060> [SKIN] No skin to read...
< 74656.069> [AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment...
< 74656.069> [AutomaticVolumeAdjustmentConfig] Loading config file...
< 74656.077> [AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file...
< 74656.077> [AutomaticVolumeAdjustment] initialize config values...
< 74656.098> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 74656.161> close failed in file object destructor:
< 74656.161> IOError: [Errno 22] Invalid argument
< 74656.216> [Skin] SKIN ERROR in SecondInfoBar: No module named ServiceOrbitalPosition
< 74656.218> [Skin] Attribute not implemented: borderColor value: transparent
< 74656.219> [Skin] Attribute not implemented: borderWidth value: 0
< 74656.259> [SKIN] No skin to read...
< 74656.285> [Skin] SKIN ERROR in ChannelSelection: No module named ServiceOrbitalPosition
< 74656.289> warning, skin is missing element key_yellow in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.290> warning, skin is missing element key_blue in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.292> EXCEPTION IN PYTHON STARTUP CODE:
< 74656.292> ------------------------------------------------------------
< 74656.292> Traceback (most recent call last):
< 74656.293>   File "/usr/lib/enigma2/python/mytest.py", line 583, in <module>
< 74656.294>     runScreenTest()
< 74656.294>   File "/usr/lib/enigma2/python/mytest.py", line 464, in runScreenTest
< 74656.295>     runNextScreen(session, screensToRun)
< 74656.295>   File "/usr/lib/enigma2/python/mytest.py", line 458, in runNextScreen
< 74656.295>     session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 279, in openWithCallback
< 74656.296>     dlg = self.open(screen, *arguments, **kwargs)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 289, in open
< 74656.297>     dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.297>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 249, in doInstantiateDialog
< 74656.298>     dlg = screen(self, *arguments, **kwargs)
< 74656.298>   File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 65, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 598, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.299>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.300>   File "/usr/lib/enigma2/python/mytest.py", line 256, in doInstantiateDialog
< 74656.300>     dlg.applySkin()
< 74656.300>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 119, in applySkin
< 74656.301>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 30, in createGUIScreen
< 74656.301>   File "/usr/lib/enigma2/python/Components/ServiceList.py", line 128, in applySkin
< 74656.302> TypeError: 'NoneType' object is not iterable
< 74656.302> ------------------------------------------------------------
 


Re: Update PD1loi-HD-full HD skin. #608 Loui (PD1LOI)

  • Senior Member
  • 4,642 posts

+150
Excellent

Posted 18 April 2016 - 07:51

Jammer werkt bij mij dus niet op mijn et8000

zie hier;

OpenPLi Enigma2 crash log

crashdate=zo apr 17 23:58:46 2016
compiledate=Apr 15 2016
skin=PD1LOI-Full-HD/skin.xml
sourcedate=2016-04-14
branch=(no branch)
rev=36989a1
component=Enigma2

stbmodel=et8000
stbmodel=dm800se
kernelcmdline=ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M bmem=360M@512M memc1=768M console=null
nimsockets=NIM Socket 0:
imageissue=openpli 4 %h


< 74651.165> [HardwareInfo] Scanning hardware info
< 74651.167> Detected: et8000 (94-2)
< 74651.175> [Harddisk] enumerating block devices...
< 74651.182> [Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
< 74651.182> [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sdb')
< 74651.813> [NimManager] Reading satellites.xml
< 74652.011> [NimManager] Reading cables.xml
< 74652.012> [NimManager] Reading terrestrial.xml
< 74652.235> [SecConfigure] sec config cleared
< 74652.236> [SecConfigure] slot: 0 configmode: advanced
< 74652.239> [SecConfigure] add 130 to 5
< 74652.240> [SecConfigure] add 192 to 3
< 74652.240> [SecConfigure] add 194 to 3
< 74652.241> [SecConfigure] add 235 to 2
< 74652.242> [SecConfigure] add 282 to 1
< 74652.270> [SecConfigure] sec config completed
< 74652.329> [Picon] adding path: /picon/
< 74652.747> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 74653.411> Unknown device type: front panel
< 74653.423> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 74653.456> Activating keymap: Default (US)
< 74653.457> [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
< 74653.459> Activating language Nederlands
< 74653.726> --> setting scaler_sharpness to: 0000000D
< 74653.884> [keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
< 74653.887> [ePopen] command: ip -o addr show dev eth0
< 74653.994> Plugin  Extensions/MyMetrixLite failed to load: No module named plugin
< 74653.994> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/MyMetrixLite
< 74655.593> getFPVersion failed!
< 74655.603> Plugin  Extensions/WebInterface failed to load: No module named plugin
< 74655.604> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
< 74655.625> [AudioSync] fallback to default translation for  Audio Sync Setup
< 74655.627> [AudioSync] fallback to default translation for  Setup for the Audio Sync Plugin
< 74655.630> [AudioSync] fallback to default translation for  Audio Sync
< 74655.633> [AudioSync] fallback to default translation for  sets the Audio Delay (LipSync)
< 74655.644> [MovieCut] set language to  nl
< 74655.646> [MovieCut] set language to  nl
< 74655.649> [MovieCut] fallback to default Enigma2 Translation for Execute cuts...
< 74655.945> [NetworkBrowser] fallback to default translation for Attempt to mount shares again
< 74655.953> [VideoHardware] getModeList for port DVI-PC
< 74655.954> [VideoHardware] remove DVI-PC because of not existing modes
< 74655.954> [VideoHardware] getModeList for port Scart
< 74655.955> [VideoHardware] getModeList for port YPbPr
< 74655.956> [VideoHardware] getModeList for port Scart
< 74655.959> [VideoHardware] getModeList for port DVI
< 74655.962> [VideoHardware] hotplug on dvi
< 74655.963> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.965> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.967> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.969> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.971> [VideoHardware] setMode - port: DVI mode: 1080i rate: multi
< 74655.973> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74656.060> [SKIN] No skin to read...
< 74656.069> [AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment...
< 74656.069> [AutomaticVolumeAdjustmentConfig] Loading config file...
< 74656.077> [AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file...
< 74656.077> [AutomaticVolumeAdjustment] initialize config values...
< 74656.098> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 74656.161> close failed in file object destructor:
< 74656.161> IOError: [Errno 22] Invalid argument
< 74656.216> [Skin] SKIN ERROR in SecondInfoBar: No module named ServiceOrbitalPosition
< 74656.218> [Skin] Attribute not implemented: borderColor value: transparent
< 74656.219> [Skin] Attribute not implemented: borderWidth value: 0
< 74656.259> [SKIN] No skin to read...
< 74656.285> [Skin] SKIN ERROR in ChannelSelection: No module named ServiceOrbitalPosition
< 74656.289> warning, skin is missing element key_yellow in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.290> warning, skin is missing element key_blue in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.292> EXCEPTION IN PYTHON STARTUP CODE:
< 74656.292> ------------------------------------------------------------
< 74656.292> Traceback (most recent call last):
< 74656.293>   File "/usr/lib/enigma2/python/mytest.py", line 583, in <module>
< 74656.294>     runScreenTest()
< 74656.294>   File "/usr/lib/enigma2/python/mytest.py", line 464, in runScreenTest
< 74656.295>     runNextScreen(session, screensToRun)
< 74656.295>   File "/usr/lib/enigma2/python/mytest.py", line 458, in runNextScreen
< 74656.295>     session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 279, in openWithCallback
< 74656.296>     dlg = self.open(screen, *arguments, **kwargs)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 289, in open
< 74656.297>     dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.297>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 249, in doInstantiateDialog
< 74656.298>     dlg = screen(self, *arguments, **kwargs)
< 74656.298>   File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 65, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 598, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.299>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.300>   File "/usr/lib/enigma2/python/mytest.py", line 256, in doInstantiateDialog
< 74656.300>     dlg.applySkin()
< 74656.300>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 119, in applySkin
< 74656.301>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 30, in createGUIScreen
< 74656.301>   File "/usr/lib/enigma2/python/Components/ServiceList.py", line 128, in applySkin
< 74656.302> TypeError: 'NoneType' object is not iterable
< 74656.302> ------------------------------------------------------------
 

Het zou moeten werken op een ET maar ik heb het vermoeden dat bij het kopiëren iets mis is gegaan. Probeer deze eens is het zelfde 

alleen is hier WeatherPlugin wat verbeter. Niet de plugin zelf maar de weergave ervan.Attached File  enigma2-plugin-skins-pd1loi-hd-full-hd_1.1a_all.ipk   2.43MB   26 downloads


Re: Update PD1loi-HD-full HD skin. #609 Loui (PD1LOI)

  • Senior Member
  • 4,642 posts

+150
Excellent

Posted 18 April 2016 - 09:40

Try:

<widget alphatest="blend" position="1197,31" render="MSNWeatherPixmap" size="72,72" source="session.MSNWeather" zPosition="1" transparent="1">

  <convert type="MSNWeather">weathericon,current,/usr/share/enigma2/weather_icons/,png</convert>

</widget>

ook in MSNWeatherPixmap.py heb ik dit gevonden,

GUI_WIDGET = ePixmap
 
def postWidgetCreate(self, instance):
for (attrib, value) in self.skinAttributes:
if attrib == "size":
x, y = value.split(',')
self._scaleSize = eSize(int(x), int(y))
break
sc = AVSwitch().getFramebufferScale()
self._aspectRatio = eSize(sc[0], sc[1])
self.picload.setPara((self._scaleSize.width(), self._scaleSize.height(), sc[0], sc[1], True, 2, '#ff000000'))
 
def disconnectAll(self):
self.picload.PictureData.get().remove(self.paintIconPixmapCB)
self.picload = None
Renderer.disconnectAll(self)
 
Ook hier krijg ik verschillende kleuren achtergrond als de waardes veranderd maar geen transparant. 
#ff000000 is standaard zoals het in de plugin is mee geleverd.

Re: Update PD1loi-HD-full HD skin. #610 digiclown

  • Member
  • 3 posts

0
Neutral

Posted 18 April 2016 - 10:07

 

Jammer werkt bij mij dus niet op mijn et8000

zie hier;

OpenPLi Enigma2 crash log

crashdate=zo apr 17 23:58:46 2016
compiledate=Apr 15 2016
skin=PD1LOI-Full-HD/skin.xml
sourcedate=2016-04-14
branch=(no branch)
rev=36989a1
component=Enigma2

stbmodel=et8000
stbmodel=dm800se
kernelcmdline=ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M bmem=360M@512M memc1=768M console=null
nimsockets=NIM Socket 0:
imageissue=openpli 4 %h


< 74651.165> [HardwareInfo] Scanning hardware info
< 74651.167> Detected: et8000 (94-2)
< 74651.175> [Harddisk] enumerating block devices...
< 74651.182> [Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
< 74651.182> [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sdb')
< 74651.813> [NimManager] Reading satellites.xml
< 74652.011> [NimManager] Reading cables.xml
< 74652.012> [NimManager] Reading terrestrial.xml
< 74652.235> [SecConfigure] sec config cleared
< 74652.236> [SecConfigure] slot: 0 configmode: advanced
< 74652.239> [SecConfigure] add 130 to 5
< 74652.240> [SecConfigure] add 192 to 3
< 74652.240> [SecConfigure] add 194 to 3
< 74652.241> [SecConfigure] add 235 to 2
< 74652.242> [SecConfigure] add 282 to 1
< 74652.270> [SecConfigure] sec config completed
< 74652.329> [Picon] adding path: /picon/
< 74652.747> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 74653.411> Unknown device type: front panel
< 74653.423> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 74653.456> Activating keymap: Default (US)
< 74653.457> [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
< 74653.459> Activating language Nederlands
< 74653.726> --> setting scaler_sharpness to: 0000000D
< 74653.884> [keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
< 74653.887> [ePopen] command: ip -o addr show dev eth0
< 74653.994> Plugin  Extensions/MyMetrixLite failed to load: No module named plugin
< 74653.994> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/MyMetrixLite
< 74655.593> getFPVersion failed!
< 74655.603> Plugin  Extensions/WebInterface failed to load: No module named plugin
< 74655.604> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
< 74655.625> [AudioSync] fallback to default translation for  Audio Sync Setup
< 74655.627> [AudioSync] fallback to default translation for  Setup for the Audio Sync Plugin
< 74655.630> [AudioSync] fallback to default translation for  Audio Sync
< 74655.633> [AudioSync] fallback to default translation for  sets the Audio Delay (LipSync)
< 74655.644> [MovieCut] set language to  nl
< 74655.646> [MovieCut] set language to  nl
< 74655.649> [MovieCut] fallback to default Enigma2 Translation for Execute cuts...
< 74655.945> [NetworkBrowser] fallback to default translation for Attempt to mount shares again
< 74655.953> [VideoHardware] getModeList for port DVI-PC
< 74655.954> [VideoHardware] remove DVI-PC because of not existing modes
< 74655.954> [VideoHardware] getModeList for port Scart
< 74655.955> [VideoHardware] getModeList for port YPbPr
< 74655.956> [VideoHardware] getModeList for port Scart
< 74655.959> [VideoHardware] getModeList for port DVI
< 74655.962> [VideoHardware] hotplug on dvi
< 74655.963> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.965> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.967> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.969> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.971> [VideoHardware] setMode - port: DVI mode: 1080i rate: multi
< 74655.973> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74656.060> [SKIN] No skin to read...
< 74656.069> [AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment...
< 74656.069> [AutomaticVolumeAdjustmentConfig] Loading config file...
< 74656.077> [AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file...
< 74656.077> [AutomaticVolumeAdjustment] initialize config values...
< 74656.098> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 74656.161> close failed in file object destructor:
< 74656.161> IOError: [Errno 22] Invalid argument
< 74656.216> [Skin] SKIN ERROR in SecondInfoBar: No module named ServiceOrbitalPosition
< 74656.218> [Skin] Attribute not implemented: borderColor value: transparent
< 74656.219> [Skin] Attribute not implemented: borderWidth value: 0
< 74656.259> [SKIN] No skin to read...
< 74656.285> [Skin] SKIN ERROR in ChannelSelection: No module named ServiceOrbitalPosition
< 74656.289> warning, skin is missing element key_yellow in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.290> warning, skin is missing element key_blue in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.292> EXCEPTION IN PYTHON STARTUP CODE:
< 74656.292> ------------------------------------------------------------
< 74656.292> Traceback (most recent call last):
< 74656.293>   File "/usr/lib/enigma2/python/mytest.py", line 583, in <module>
< 74656.294>     runScreenTest()
< 74656.294>   File "/usr/lib/enigma2/python/mytest.py", line 464, in runScreenTest
< 74656.295>     runNextScreen(session, screensToRun)
< 74656.295>   File "/usr/lib/enigma2/python/mytest.py", line 458, in runNextScreen
< 74656.295>     session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 279, in openWithCallback
< 74656.296>     dlg = self.open(screen, *arguments, **kwargs)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 289, in open
< 74656.297>     dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.297>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 249, in doInstantiateDialog
< 74656.298>     dlg = screen(self, *arguments, **kwargs)
< 74656.298>   File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 65, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 598, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.299>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.300>   File "/usr/lib/enigma2/python/mytest.py", line 256, in doInstantiateDialog
< 74656.300>     dlg.applySkin()
< 74656.300>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 119, in applySkin
< 74656.301>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 30, in createGUIScreen
< 74656.301>   File "/usr/lib/enigma2/python/Components/ServiceList.py", line 128, in applySkin
< 74656.302> TypeError: 'NoneType' object is not iterable
< 74656.302> ------------------------------------------------------------
 

Het zou moeten werken op een ET maar ik heb het vermoeden dat bij het kopiëren iets mis is gegaan. Probeer deze eens is het zelfde 

alleen is hier WeatherPlugin wat verbeter. Niet de plugin zelf maar de weergave ervan.attachicon.gifenigma2-plugin-skins-pd1loi-hd-full-hd_1.1a_all.ipk

 

 

Geachte, deze plugin werkt tot zover ik kan zien uitstekend.

 

Mijn dank is weer groot. :)


Re: Update PD1loi-HD-full HD skin. #611 Loui (PD1LOI)

  • Senior Member
  • 4,642 posts

+150
Excellent

Posted 18 April 2016 - 10:40

 

 

Jammer werkt bij mij dus niet op mijn et8000

zie hier;

OpenPLi Enigma2 crash log

crashdate=zo apr 17 23:58:46 2016
compiledate=Apr 15 2016
skin=PD1LOI-Full-HD/skin.xml
sourcedate=2016-04-14
branch=(no branch)
rev=36989a1
component=Enigma2

stbmodel=et8000
stbmodel=dm800se
kernelcmdline=ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M bmem=360M@512M memc1=768M console=null
nimsockets=NIM Socket 0:
imageissue=openpli 4 %h


< 74651.165> [HardwareInfo] Scanning hardware info
< 74651.167> Detected: et8000 (94-2)
< 74651.175> [Harddisk] enumerating block devices...
< 74651.182> [Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
< 74651.182> [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sdb')
< 74651.813> [NimManager] Reading satellites.xml
< 74652.011> [NimManager] Reading cables.xml
< 74652.012> [NimManager] Reading terrestrial.xml
< 74652.235> [SecConfigure] sec config cleared
< 74652.236> [SecConfigure] slot: 0 configmode: advanced
< 74652.239> [SecConfigure] add 130 to 5
< 74652.240> [SecConfigure] add 192 to 3
< 74652.240> [SecConfigure] add 194 to 3
< 74652.241> [SecConfigure] add 235 to 2
< 74652.242> [SecConfigure] add 282 to 1
< 74652.270> [SecConfigure] sec config completed
< 74652.329> [Picon] adding path: /picon/
< 74652.747> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 74653.411> Unknown device type: front panel
< 74653.423> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 74653.456> Activating keymap: Default (US)
< 74653.457> [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
< 74653.459> Activating language Nederlands
< 74653.726> --> setting scaler_sharpness to: 0000000D
< 74653.884> [keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
< 74653.887> [ePopen] command: ip -o addr show dev eth0
< 74653.994> Plugin  Extensions/MyMetrixLite failed to load: No module named plugin
< 74653.994> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/MyMetrixLite
< 74655.593> getFPVersion failed!
< 74655.603> Plugin  Extensions/WebInterface failed to load: No module named plugin
< 74655.604> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
< 74655.625> [AudioSync] fallback to default translation for  Audio Sync Setup
< 74655.627> [AudioSync] fallback to default translation for  Setup for the Audio Sync Plugin
< 74655.630> [AudioSync] fallback to default translation for  Audio Sync
< 74655.633> [AudioSync] fallback to default translation for  sets the Audio Delay (LipSync)
< 74655.644> [MovieCut] set language to  nl
< 74655.646> [MovieCut] set language to  nl
< 74655.649> [MovieCut] fallback to default Enigma2 Translation for Execute cuts...
< 74655.945> [NetworkBrowser] fallback to default translation for Attempt to mount shares again
< 74655.953> [VideoHardware] getModeList for port DVI-PC
< 74655.954> [VideoHardware] remove DVI-PC because of not existing modes
< 74655.954> [VideoHardware] getModeList for port Scart
< 74655.955> [VideoHardware] getModeList for port YPbPr
< 74655.956> [VideoHardware] getModeList for port Scart
< 74655.959> [VideoHardware] getModeList for port DVI
< 74655.962> [VideoHardware] hotplug on dvi
< 74655.963> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.965> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.967> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.969> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.971> [VideoHardware] setMode - port: DVI mode: 1080i rate: multi
< 74655.973> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74656.060> [SKIN] No skin to read...
< 74656.069> [AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment...
< 74656.069> [AutomaticVolumeAdjustmentConfig] Loading config file...
< 74656.077> [AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file...
< 74656.077> [AutomaticVolumeAdjustment] initialize config values...
< 74656.098> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 74656.161> close failed in file object destructor:
< 74656.161> IOError: [Errno 22] Invalid argument
< 74656.216> [Skin] SKIN ERROR in SecondInfoBar: No module named ServiceOrbitalPosition
< 74656.218> [Skin] Attribute not implemented: borderColor value: transparent
< 74656.219> [Skin] Attribute not implemented: borderWidth value: 0
< 74656.259> [SKIN] No skin to read...
< 74656.285> [Skin] SKIN ERROR in ChannelSelection: No module named ServiceOrbitalPosition
< 74656.289> warning, skin is missing element key_yellow in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.290> warning, skin is missing element key_blue in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.292> EXCEPTION IN PYTHON STARTUP CODE:
< 74656.292> ------------------------------------------------------------
< 74656.292> Traceback (most recent call last):
< 74656.293>   File "/usr/lib/enigma2/python/mytest.py", line 583, in <module>
< 74656.294>     runScreenTest()
< 74656.294>   File "/usr/lib/enigma2/python/mytest.py", line 464, in runScreenTest
< 74656.295>     runNextScreen(session, screensToRun)
< 74656.295>   File "/usr/lib/enigma2/python/mytest.py", line 458, in runNextScreen
< 74656.295>     session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 279, in openWithCallback
< 74656.296>     dlg = self.open(screen, *arguments, **kwargs)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 289, in open
< 74656.297>     dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.297>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 249, in doInstantiateDialog
< 74656.298>     dlg = screen(self, *arguments, **kwargs)
< 74656.298>   File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 65, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 598, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.299>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.300>   File "/usr/lib/enigma2/python/mytest.py", line 256, in doInstantiateDialog
< 74656.300>     dlg.applySkin()
< 74656.300>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 119, in applySkin
< 74656.301>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 30, in createGUIScreen
< 74656.301>   File "/usr/lib/enigma2/python/Components/ServiceList.py", line 128, in applySkin
< 74656.302> TypeError: 'NoneType' object is not iterable
< 74656.302> ------------------------------------------------------------
 

Het zou moeten werken op een ET maar ik heb het vermoeden dat bij het kopiëren iets mis is gegaan. Probeer deze eens is het zelfde 

alleen is hier WeatherPlugin wat verbeter. Niet de plugin zelf maar de weergave ervan.attachicon.gifenigma2-plugin-skins-pd1loi-hd-full-hd_1.1a_all.ipk

 

 

Geachte, deze plugin werkt tot zover ik kan zien uitstekend.

 

Mijn dank is weer groot. :)

 

Graag gedaan.


Re: Update PD1loi-HD-full HD skin. #612 digiclown

  • Member
  • 3 posts

0
Neutral

Posted 19 April 2016 - 01:46

 

 

 

Jammer werkt bij mij dus niet op mijn et8000

zie hier;

OpenPLi Enigma2 crash log

crashdate=zo apr 17 23:58:46 2016
compiledate=Apr 15 2016
skin=PD1LOI-Full-HD/skin.xml
sourcedate=2016-04-14
branch=(no branch)
rev=36989a1
component=Enigma2

stbmodel=et8000
stbmodel=dm800se
kernelcmdline=ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M bmem=360M@512M memc1=768M console=null
nimsockets=NIM Socket 0:
imageissue=openpli 4 %h


< 74651.165> [HardwareInfo] Scanning hardware info
< 74651.167> Detected: et8000 (94-2)
< 74651.175> [Harddisk] enumerating block devices...
< 74651.182> [Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
< 74651.182> [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sdb')
< 74651.813> [NimManager] Reading satellites.xml
< 74652.011> [NimManager] Reading cables.xml
< 74652.012> [NimManager] Reading terrestrial.xml
< 74652.235> [SecConfigure] sec config cleared
< 74652.236> [SecConfigure] slot: 0 configmode: advanced
< 74652.239> [SecConfigure] add 130 to 5
< 74652.240> [SecConfigure] add 192 to 3
< 74652.240> [SecConfigure] add 194 to 3
< 74652.241> [SecConfigure] add 235 to 2
< 74652.242> [SecConfigure] add 282 to 1
< 74652.270> [SecConfigure] sec config completed
< 74652.329> [Picon] adding path: /picon/
< 74652.747> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 74653.411> Unknown device type: front panel
< 74653.423> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 74653.456> Activating keymap: Default (US)
< 74653.457> [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
< 74653.459> Activating language Nederlands
< 74653.726> --> setting scaler_sharpness to: 0000000D
< 74653.884> [keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
< 74653.887> [ePopen] command: ip -o addr show dev eth0
< 74653.994> Plugin  Extensions/MyMetrixLite failed to load: No module named plugin
< 74653.994> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/MyMetrixLite
< 74655.593> getFPVersion failed!
< 74655.603> Plugin  Extensions/WebInterface failed to load: No module named plugin
< 74655.604> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
< 74655.625> [AudioSync] fallback to default translation for  Audio Sync Setup
< 74655.627> [AudioSync] fallback to default translation for  Setup for the Audio Sync Plugin
< 74655.630> [AudioSync] fallback to default translation for  Audio Sync
< 74655.633> [AudioSync] fallback to default translation for  sets the Audio Delay (LipSync)
< 74655.644> [MovieCut] set language to  nl
< 74655.646> [MovieCut] set language to  nl
< 74655.649> [MovieCut] fallback to default Enigma2 Translation for Execute cuts...
< 74655.945> [NetworkBrowser] fallback to default translation for Attempt to mount shares again
< 74655.953> [VideoHardware] getModeList for port DVI-PC
< 74655.954> [VideoHardware] remove DVI-PC because of not existing modes
< 74655.954> [VideoHardware] getModeList for port Scart
< 74655.955> [VideoHardware] getModeList for port YPbPr
< 74655.956> [VideoHardware] getModeList for port Scart
< 74655.959> [VideoHardware] getModeList for port DVI
< 74655.962> [VideoHardware] hotplug on dvi
< 74655.963> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.965> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.967> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.969> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.971> [VideoHardware] setMode - port: DVI mode: 1080i rate: multi
< 74655.973> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74656.060> [SKIN] No skin to read...
< 74656.069> [AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment...
< 74656.069> [AutomaticVolumeAdjustmentConfig] Loading config file...
< 74656.077> [AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file...
< 74656.077> [AutomaticVolumeAdjustment] initialize config values...
< 74656.098> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 74656.161> close failed in file object destructor:
< 74656.161> IOError: [Errno 22] Invalid argument
< 74656.216> [Skin] SKIN ERROR in SecondInfoBar: No module named ServiceOrbitalPosition
< 74656.218> [Skin] Attribute not implemented: borderColor value: transparent
< 74656.219> [Skin] Attribute not implemented: borderWidth value: 0
< 74656.259> [SKIN] No skin to read...
< 74656.285> [Skin] SKIN ERROR in ChannelSelection: No module named ServiceOrbitalPosition
< 74656.289> warning, skin is missing element key_yellow in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.290> warning, skin is missing element key_blue in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.292> EXCEPTION IN PYTHON STARTUP CODE:
< 74656.292> ------------------------------------------------------------
< 74656.292> Traceback (most recent call last):
< 74656.293>   File "/usr/lib/enigma2/python/mytest.py", line 583, in <module>
< 74656.294>     runScreenTest()
< 74656.294>   File "/usr/lib/enigma2/python/mytest.py", line 464, in runScreenTest
< 74656.295>     runNextScreen(session, screensToRun)
< 74656.295>   File "/usr/lib/enigma2/python/mytest.py", line 458, in runNextScreen
< 74656.295>     session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 279, in openWithCallback
< 74656.296>     dlg = self.open(screen, *arguments, **kwargs)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 289, in open
< 74656.297>     dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.297>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 249, in doInstantiateDialog
< 74656.298>     dlg = screen(self, *arguments, **kwargs)
< 74656.298>   File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 65, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 598, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.299>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.300>   File "/usr/lib/enigma2/python/mytest.py", line 256, in doInstantiateDialog
< 74656.300>     dlg.applySkin()
< 74656.300>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 119, in applySkin
< 74656.301>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 30, in createGUIScreen
< 74656.301>   File "/usr/lib/enigma2/python/Components/ServiceList.py", line 128, in applySkin
< 74656.302> TypeError: 'NoneType' object is not iterable
< 74656.302> ------------------------------------------------------------
 

Het zou moeten werken op een ET maar ik heb het vermoeden dat bij het kopiëren iets mis is gegaan. Probeer deze eens is het zelfde 

alleen is hier WeatherPlugin wat verbeter. Niet de plugin zelf maar de weergave ervan.attachicon.gifenigma2-plugin-skins-pd1loi-hd-full-hd_1.1a_all.ipk

 

 

Geachte, deze plugin werkt tot zover ik kan zien uitstekend.

 

Mijn dank is weer groot. :)

 

Graag gedaan.

 

 

 

Moet toch wat van mijn hart, naast de plaats naam,op de balk heb je in het wit onder of boven elkaar (hoe je dat wil noemen) de minimale en de maximale temperatuur.

 

deze temperaturen zijn van de vorige dag dus het is nu dinsdag dan staat de temperaturen van maandag, hoort dat zo of is dat een bug?


Re: Update PD1loi-HD-full HD skin. #613 altobelli

  • Senior Member
  • 332 posts

+9
Neutral

Posted 19 April 2016 - 05:49

Ik heb heden de image geupdated en nu staat er bij Sunrise en sunset n/a


Re: Update PD1loi-HD-full HD skin. #614 Loui (PD1LOI)

  • Senior Member
  • 4,642 posts

+150
Excellent

Posted 19 April 2016 - 07:04

 

 

 

 

Jammer werkt bij mij dus niet op mijn et8000

zie hier;

OpenPLi Enigma2 crash log

crashdate=zo apr 17 23:58:46 2016
compiledate=Apr 15 2016
skin=PD1LOI-Full-HD/skin.xml
sourcedate=2016-04-14
branch=(no branch)
rev=36989a1
component=Enigma2

stbmodel=et8000
stbmodel=dm800se
kernelcmdline=ubi.mtd=rootfs rootfstype=ubifs root=ubi0:rootfs bmem=192M@64M bmem=360M@512M memc1=768M console=null
nimsockets=NIM Socket 0:
imageissue=openpli 4 %h


< 74651.165> [HardwareInfo] Scanning hardware info
< 74651.167> Detected: et8000 (94-2)
< 74651.175> [Harddisk] enumerating block devices...
< 74651.182> [Harddisk] new device sdb -> /dev/sdb -> /dev/sdb
< 74651.182> [ePopen] command: ('hdparm', 'hdparm', '-S0', '/dev/sdb')
< 74651.813> [NimManager] Reading satellites.xml
< 74652.011> [NimManager] Reading cables.xml
< 74652.012> [NimManager] Reading terrestrial.xml
< 74652.235> [SecConfigure] sec config cleared
< 74652.236> [SecConfigure] slot: 0 configmode: advanced
< 74652.239> [SecConfigure] add 130 to 5
< 74652.240> [SecConfigure] add 192 to 3
< 74652.240> [SecConfigure] add 194 to 3
< 74652.241> [SecConfigure] add 235 to 2
< 74652.242> [SecConfigure] add 282 to 1
< 74652.270> [SecConfigure] sec config completed
< 74652.329> [Picon] adding path: /picon/
< 74652.747> [ML] BlurayPlayer not installed: cannot import name BlurayPlayer
< 74653.411> Unknown device type: front panel
< 74653.423> [iInputDevices] getInputDevices mice <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
< 74653.456> Activating keymap: Default (US)
< 74653.457> [ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
< 74653.459> Activating language Nederlands
< 74653.726> --> setting scaler_sharpness to: 0000000D
< 74653.884> [keymapparser] keymap file /usr/share/enigma2/keytranslation.xml not found
< 74653.887> [ePopen] command: ip -o addr show dev eth0
< 74653.994> Plugin  Extensions/MyMetrixLite failed to load: No module named plugin
< 74653.994> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/MyMetrixLite
< 74655.593> getFPVersion failed!
< 74655.603> Plugin  Extensions/WebInterface failed to load: No module named plugin
< 74655.604> Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
< 74655.625> [AudioSync] fallback to default translation for  Audio Sync Setup
< 74655.627> [AudioSync] fallback to default translation for  Setup for the Audio Sync Plugin
< 74655.630> [AudioSync] fallback to default translation for  Audio Sync
< 74655.633> [AudioSync] fallback to default translation for  sets the Audio Delay (LipSync)
< 74655.644> [MovieCut] set language to  nl
< 74655.646> [MovieCut] set language to  nl
< 74655.649> [MovieCut] fallback to default Enigma2 Translation for Execute cuts...
< 74655.945> [NetworkBrowser] fallback to default translation for Attempt to mount shares again
< 74655.953> [VideoHardware] getModeList for port DVI-PC
< 74655.954> [VideoHardware] remove DVI-PC because of not existing modes
< 74655.954> [VideoHardware] getModeList for port Scart
< 74655.955> [VideoHardware] getModeList for port YPbPr
< 74655.956> [VideoHardware] getModeList for port Scart
< 74655.959> [VideoHardware] getModeList for port DVI
< 74655.962> [VideoHardware] hotplug on dvi
< 74655.963> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.965> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.967> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.969> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74655.971> [VideoHardware] setMode - port: DVI mode: 1080i rate: multi
< 74655.973> [VideoHardware] -> setting aspect, policy, policy2, wss 16:9 panscan letterbox auto
< 74656.060> [SKIN] No skin to read...
< 74656.069> [AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment...
< 74656.069> [AutomaticVolumeAdjustmentConfig] Loading config file...
< 74656.077> [AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file...
< 74656.077> [AutomaticVolumeAdjustment] initialize config values...
< 74656.098> [SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
< 74656.161> close failed in file object destructor:
< 74656.161> IOError: [Errno 22] Invalid argument
< 74656.216> [Skin] SKIN ERROR in SecondInfoBar: No module named ServiceOrbitalPosition
< 74656.218> [Skin] Attribute not implemented: borderColor value: transparent
< 74656.219> [Skin] Attribute not implemented: borderWidth value: 0
< 74656.259> [SKIN] No skin to read...
< 74656.285> [Skin] SKIN ERROR in ChannelSelection: No module named ServiceOrbitalPosition
< 74656.289> warning, skin is missing element key_yellow in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.290> warning, skin is missing element key_blue in <class 'Screens.ChannelSelection.ChannelSelection'>
< 74656.292> EXCEPTION IN PYTHON STARTUP CODE:
< 74656.292> ------------------------------------------------------------
< 74656.292> Traceback (most recent call last):
< 74656.293>   File "/usr/lib/enigma2/python/mytest.py", line 583, in <module>
< 74656.294>     runScreenTest()
< 74656.294>   File "/usr/lib/enigma2/python/mytest.py", line 464, in runScreenTest
< 74656.295>     runNextScreen(session, screensToRun)
< 74656.295>   File "/usr/lib/enigma2/python/mytest.py", line 458, in runNextScreen
< 74656.295>     session.openWithCallback(boundFunction(runNextScreen, session, screensToRun[1:]), screen, *args)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 279, in openWithCallback
< 74656.296>     dlg = self.open(screen, *arguments, **kwargs)
< 74656.296>   File "/usr/lib/enigma2/python/mytest.py", line 289, in open
< 74656.297>     dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.297>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.297>   File "/usr/lib/enigma2/python/mytest.py", line 249, in doInstantiateDialog
< 74656.298>     dlg = screen(self, *arguments, **kwargs)
< 74656.298>   File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 65, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/Screens/InfoBarGenerics.py", line 598, in __init__
< 74656.299>   File "/usr/lib/enigma2/python/mytest.py", line 232, in instantiateDialog
< 74656.299>     return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
< 74656.300>   File "/usr/lib/enigma2/python/mytest.py", line 256, in doInstantiateDialog
< 74656.300>     dlg.applySkin()
< 74656.300>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 119, in applySkin
< 74656.301>   File "/usr/lib/enigma2/python/Components/GUISkin.py", line 30, in createGUIScreen
< 74656.301>   File "/usr/lib/enigma2/python/Components/ServiceList.py", line 128, in applySkin
< 74656.302> TypeError: 'NoneType' object is not iterable
< 74656.302> ------------------------------------------------------------
 

Het zou moeten werken op een ET maar ik heb het vermoeden dat bij het kopiëren iets mis is gegaan. Probeer deze eens is het zelfde 

alleen is hier WeatherPlugin wat verbeter. Niet de plugin zelf maar de weergave ervan.attachicon.gifenigma2-plugin-skins-pd1loi-hd-full-hd_1.1a_all.ipk

 

 

Geachte, deze plugin werkt tot zover ik kan zien uitstekend.

 

Mijn dank is weer groot. :)

 

Graag gedaan.

 

 

 

Moet toch wat van mijn hart, naast de plaats naam,op de balk heb je in het wit onder of boven elkaar (hoe je dat wil noemen) de minimale en de maximale temperatuur.

 

deze temperaturen zijn van de vorige dag dus het is nu dinsdag dan staat de temperaturen van maandag, hoort dat zo of is dat een bug?

 

Dat zal een bug zijn normaal is deze info afkomstig van de weather server van MSN het zijn de min-max temperatuur die je daar ziet.


Re: Update PD1loi-HD-full HD skin. #615 Loui (PD1LOI)

  • Senior Member
  • 4,642 posts

+150
Excellent

Posted 19 April 2016 - 07:07

Ik heb heden de image geupdated en nu staat er bij Sunrise en sunset n/a

heb je de bijbehorende WeatherPlugin b.1.1 geinstalleerd? zo ja dan moet je de plugin je plaatsnaam even invullen. hoe dat moet staat hierboven ergens beschreven.En verwijder Yweather.py in converter dan is sunrise en sunset verdwenen


Edited by Loui (PD1LOI), 19 April 2016 - 07:09.

Re: Update PD1loi-HD-full HD skin. #616 Jaja

  • Senior Member
  • 132 posts

0
Neutral

Posted 19 April 2016 - 08:19

verwijder Yweather.py in converter dan is sunrise en sunset verdwenen

 

Dat klopt niet helemaal op mijn Mutant blijft sunrise staan.


Re: Update PD1loi-HD-full HD skin. #617 Loui (PD1LOI)

  • Senior Member
  • 4,642 posts

+150
Excellent

Posted 19 April 2016 - 08:23

verwijder Yweather.py in converter dan is sunrise en sunset verdwenen

 

Dat klopt niet helemaal op mijn Mutant blijft sunrise staan.

Heb je Yweather.Pyo ook verwijderd?


Re: Update PD1loi-HD-full HD skin. #618 Jaja

  • Senior Member
  • 132 posts

0
Neutral

Posted 19 April 2016 - 10:21

Ja.


Re: Update PD1loi-HD-full HD skin. #619 Jokky

  • Member
  • 1 posts

0
Neutral

Posted 19 April 2016 - 10:37

Loui thanks for a great job! ;)

 

Re: Update PD1loi-HD-full HD skin. #620 altobelli

  • Senior Member
  • 332 posts

+9
Neutral

Posted 19 April 2016 - 11:37

Ik vond sunrise en sunset wel een leuke aanvulling, update en nu  n/a ipv de tijd.

Ik heb weather plugin b.1.1 wel geinstalleerd

Voor het overige is de skin weer perfect.


Edited by altobelli, 19 April 2016 - 11:38.

Back to Skins

1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

  1. Forums
  2. → PLi® Development
  3. → Skins