12 replies to this topic

[jimmyhand]

Hi all,

since yesterday, I'm only able to receive FTA channels. Nothing was changed. This evening I was looking around the net and I tried to update the softcam. Don't know if this actually happened. Anyway, now I can't enter my HDD with recorded stuff, either. I get this message:
your stb encountered a software problem and will be restarted. Mail crashrepprt ...

So, does anybody know why I suddenly cannot receive any channels anymore? Where do I have to look to find the possible causes?

Below's the crash report.
Thanks in advance!

<?xml version="1.0" encoding="utf-8"?>
<openpli>
	<enigma2>
		<crashdate>di jul 16 20:52:37 2013</crashdate>
		<compiledate>Jul 15 2013</compiledate>
		<contactemail>forum at www.openpli.org</contactemail>
		<!-- Please email this crashlog to above address -->
		<skin>./skin.xml</skin>
		<sourcedate>2013-07-14</sourcedate>
		<branch>(no branch)</branch>
		<rev>935e928</rev>
		<version>3.0.0</version>
	</enigma2>
	<image>
		<stbmodel>duo</stbmodel>
		<kernelversion>
			<![CDATA[
Linux vuduo 3.1.1 #1 SMP Wed Jul 25 05:26:44 CEST 2012 mips GNU/Linux
]]>
		</kernelversion>
		<kernelcmdline>bmem=112M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync bmem=112M</kernelcmdline>
		<nimsockets>NIM Socket 0:</nimsockets>
		<imageversion>
			<!-- No such file or directory -->
		</imageversion>
		<imageissue>
			<![CDATA[
openpli 3.0 %h

]]>
		</imageissue>
	</image>
	<crashlogs>
		<enigma2crashlog>
			<![CDATA[
ctBaseActions showSatellites
eStaticServiceDVBBouquetInformation::getName failed.. getBouquet failed!
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
Renumbering...
[EPGC] abort non avail schedule other reading
[eDVBLocalTimerHandler] diff is -6
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 20:49:42
[eDVBLocalTimerHandler] m_time_difference is -6
[eDVBLocalTimerHandler] set Linux Time
action ->  ChannelSelectBaseActions showFavourites
action ->  OkCancelActions ok
[EPGC] nownext finished(1374000590)
action ->  OkCancelActions ok
playing 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:16:178E:C82:3:EB0000:0:0:0:
[eDVBCAService] free service 1:0:16:178E:C82:3:EB0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x7466be90
[eEPGCache] remove channel 0x7466be90
[EPGC] abort caching events !!
allocate channel.. 0451:0035
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12515000 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1915 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:FB0:451:35:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 2
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f7(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion on, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x7466be90 running
[eEPGCache] channel 0x7466be90 running
[EPGC] next update in 51 min
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
allocate demux
decoder state: play, vpid=525, apid=122
DMX_SET_PES_FILTER(0x1ffe) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x7a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x20d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x28) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:FB0:451:35:C00000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 0844 for service_id 0fb0
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
decoder state: play, vpid=525, apid=122
[eDVBCIInterfaces] gotPMT
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 20:49:53
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
sdt update done!
action ->  GlobalActions volumeUp
Setvolume: 65 65 (raw)
Setvolume: 23 23 (-1db)
setValue 65
action ->  GlobalActions volumeUp
Setvolume: 70 70 (raw)
Setvolume: 19 19 (-1db)
setValue 70
action ->  GlobalActions volumeUp
Setvolume: 75 75 (raw)
Setvolume: 16 16 (-1db)
setValue 75
action ->  GlobalActions volumeUp
Setvolume: 80 80 (raw)
Setvolume: 13 13 (-1db)
setValue 80
action ->  GlobalActions volumeUp
Setvolume: 85 85 (raw)
Setvolume: 10 10 (-1db)
setValue 85
action ->  GlobalActions volumeUp
Setvolume: 90 90 (raw)
Setvolume: 7 7 (-1db)
setValue 90
action ->  InfobarChannelSelection switchChannelUp
action ->  OkCancelActions ok
playing 1:0:1:141F:C85:3:EB0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:FB0:451:35:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x7466be90
[eEPGCache] remove channel 0x7466be90
allocate channel.. 0c85:0003
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11798000 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 235 system 1 modulation 2 pilot 2, rolloff 2
tuning to 1198 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:141F:C85:3:EB0000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038fb(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x7466be90 running
[eEPGCache] channel 0x7466be90 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (07de), and 0 audio stream(s), and the pcr pid is 07de, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=2014, apid=-1
DMX_SET_PES_FILTER(0x7de) - pcr - ok
DEMUX_START - pcr - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x7de) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:141F:C85:3:EB0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:141F:C85:3:EB0000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 0b2d for service_id 141f
eventNewProgramInfo 0 0
have 1 video stream(s) (07de), and 1 audio stream(s) (07f2), and the pcr pid is 07de, and the text pid is ffffffff
decoder state: play, vpid=2014, apid=2034
DEMUX_STOP - video - ok
VIDEO_STOP - ok
DMX_SET_PES_FILTER(0x7f2) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x7de) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
start dvb subtitles on pid 0x086a with composition_page_id 2 and ancillary_page_id 2
[eDVBCIInterfaces] gotPMT
[SEC] set dynamic current limiting
sdt update done!
[EPGC] start caching events(1374000662)
setPage
setPage
setPage
add 0 482 720 36
disp width 720, disp height 576
action ->  InfobarChannelSelection switchChannelUp
setPage
action ->  OkCancelActions ok
playing 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:141F:C85:3:EB0000:0:0:0:
[eDVBCAService] free service 1:0:1:141F:C85:3:EB0000:0:0:0:
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - [EPGC] abort non avail mhw reading
ok
DEMUX_STOP - video - [EPGC] nownext finished(1374000669)
ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x7466be90
[eEPGCache] remove channel 0x7466be90
[EPGC] abort caching events !!
allocate channel.. 0451:0035
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12515000 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1915 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:FB0:451:35:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f7(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion on, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x747e8460 running
[eEPGCache] channel 0x747e8460 running
stop release channel timer
ok ... now we start!!
[EPGC] next update in 49 min
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
allocate demux
decoder state: play, vpid=525, apid=122
DMX_SET_PES_FILTER(0x1ffe) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x7a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x20d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x28) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:FB0:451:35:C00000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 0844 for service_id 0fb0
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
decoder state: play, vpid=525, apid=122
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
sdt update done!
[eDVBLocalTimerHandler] diff is 1
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 20:51:13
[eDVBLocalTimerHandler] m_time_difference is 1
[eDVBLocalTimerHandler] set Linux Time
action ->  InfobarChannelSelection switchChannelUp
action ->  OkCancelActions ok
playing 1:0:1:2742:402:1:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:FB0:451:35:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x747e8460
[eEPGCache] remove channel 0x747e8460
allocate channel.. 0402:0001
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 11597000 Pol 1 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1847 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:2742:402:1:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 1
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f4(?)
[SEC] sleep 50ms
set sequence pos 3
set sequence pos 3
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x747e8460 running
[eEPGCache] channel 0x747e8460 running
stop release channel timer
[EPGC] next update in 53 min
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (00a3), and 1 audio stream(s) (005c), and the pcr pid is 00a3, and the text pid is ffffffff
allocate demux
decoder state: play, vpid=163, apid=92
DMX_SET_PES_FILTER(0xa3) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x5c) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0xa3) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:2742:402:1:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:2742:402:1:C00000:0:0:0:
RemovePopup, id = ZapError
[SEC] set dynamic current limiting
PATready
use pmtpid 0742 for service_id 2742
eventNewProgramInfo 0 0
have 1 video stream(s) (00a3), and 1 audio stream(s) (005c), and the pcr pid is 00a3, and the text pid is ffffffff
decoder state: play, vpid=163, apid=92
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
[eDVBCIInterfaces] gotPMT
[eDVBCAService] don't build/send the same CA PMT twice
VIDEO_GET_EVENT - ok
sdt update done!
[eDVBLocalTimerHandler] diff is 8
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 20:52:07
[eDVBLocalTimerHandler] m_time_difference is 8
[eDVBLocalTimerHandler] set Linux Time
action ->  InfobarActions showMovies
[ePNG] couldn't open /usr/share/enigma2/skin_default/icons/rep.png
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
  File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 123, in showMovies
  File "/usr/lib/enigma2/python/mytest.py", line 294, in openWithCallback
    dlg = self.open(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 304, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 234, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/mytest.py", line 270, in doInstantiateDialog
    dlg.applySkin()
  File "/usr/lib/enigma2/python/Components/GUISkin.py", line 112, in applySkin
  File "/usr/lib/enigma2/python/Components/GUISkin.py", line 30, in createGUIScreen
  File "/usr/lib/enigma2/python/Components/Pixmap.py", line 102, in applySkin
  File "/usr/lib/enigma2/python/skin.py", line 247, in loadPixmap
skin.SkinError: {./skin.xml}: pixmap file /usr/share/enigma2/skin_default/icons/rep.png not found!. Please contact the skin's author!
(PyObject_CallObject(<bound method HelpableActionMap.action of <Components.ActionMap.HelpableActionMap instance at 0x14f42b0>>,('InfobarActions', 'showMovies')) failed)
main thread is non-idle! display spinner!
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
		</enigma2crashlog>
	</crashlogs>
</openpli>

Edited by jimmyhand, 16 July 2013 - 21:30.

[Trial]

Hi,

it seems you have messed up the default skin. /usr/share/enigma2/skin_default/icons/rep.png is missing.

 

ciao

[littlesat]

This is also wierd..

 

<skin>./skin.xml</skin>

[jimmyhand]

Is this easily restored?

[MiLo]

Yes, just flash it again. Up and running in less than ten minutes.

[jimmyhand]

And a very stupid question: how do I do this? Is there a manual somewhere I can follow?

Resetting to factory settings won't work, I presume?

[hemertje]

See our wiki

[littlesat]

Depending on the box...

 

In short...

 

XP, ET, VU -> put image on USB stick. Put USB stick in box. Power down/up the box. Then possibly you need to press a button.

DMM -> Put the box in stopmode and upload the image to the box via a webinterface and then flash.

Edited by littlesat, 17 July 2013 - 17:39.

[jimmyhand]

Hi,

 

it's a VU+ duo.

 

Thanks for the info. Fingers crossed

[jimmyhand]

Hi,

 

so I flashed but nothing's changed. Still cannot access the HDD

 

crash log:

<?xml version="1.0" encoding="utf-8"?>
<openpli>
	<enigma2>
		<crashdate>wo jul 17 21:42:04 2013</crashdate>
		<compiledate>Jul 15 2013</compiledate>
		<contactemail>forum at www.openpli.org</contactemail>
		<!-- Please email this crashlog to above address -->
		<skin>./skin.xml</skin>
		<sourcedate>2013-07-14</sourcedate>
		<branch>(no branch)</branch>
		<rev>935e928</rev>
		<version>3.0.0</version>
	</enigma2>
	<image>
		<stbmodel>duo</stbmodel>
		<kernelversion>
			<![CDATA[
Linux vuduo 3.1.1 #1 SMP Thu May 9 14:21:55 CEST 2013 mips GNU/Linux
]]>
		</kernelversion>
		<kernelcmdline>bmem=112M ubi.mtd=0 root=ubi0:rootfs rootfstype=ubifs rw rootflags=sync bmem=112M</kernelcmdline>
		<nimsockets>NIM Socket 0:</nimsockets>
		<imageversion>
			<!-- No such file or directory -->
		</imageversion>
		<imageissue>
			<![CDATA[
openpli 3.0 %h

]]>
		</imageissue>
	</image>
	<crashlogs>
		<enigma2crashlog>
			<![CDATA[
 >
[iInputDevices] getInputDevices  <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
Activating keymap: Default (US)
[ePopen] command: loadkmap < /usr/share/keymaps/default.kmap
Activating language Nederlands
--> setting scaler_sharpness to: 0000000D
couldn't open /proc/stb/misc/12V_output
[ePopen] command: ip -o addr show dev eth0
setLCDBrightness 25
setLCDBrightness 255
FIXME: request for unknown slot
FIXME: request for unknown slot
Plugin  Extensions/WebInterface failed to load: No module named plugin
Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/WebInterface
[NetworkBrowser] fallback to default translation for Mount again
[NetworkBrowser] fallback to default translation for Attempt to mount shares again
getModeList for port DVI-PC
remove DVI-PC because of not existing modes
getModeList for port YPbPr
getModeList for port Scart
getModeList for port DVI
hotplug on dvi
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
setMode - port: DVI mode: 1080i rate: 50Hz
-> setting aspect, policy, policy2, wss 16:9 bestfit letterbox auto
starting hotplug handler
[TIMER] record time changed, start prepare is now: Thu Jul 18 17:31:40 2013
[Timer] Record RecordTimerEntry(name=Buren, begin=Thu Jul 18 17:32:00 2013, serviceref=1:0:19:5221:C99:3:EB0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sun Jul 14 01:11:40 2013
[Timer] Record RecordTimerEntry(name=Million Dollar Listing, begin=Sun Jul 14 01:12:00 2013, serviceref=1:0:16:5280:C96:3:EB0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sun Jul 14 01:56:40 2013
[Timer] Record RecordTimerEntry(name=Say Yes to the Dress, begin=Sun Jul 14 01:57:00 2013, serviceref=1:0:16:5280:C96:3:EB0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sun Jul 14 10:06:40 2013
[Timer] Record RecordTimerEntry(name=The Millionaire Matchmaker, begin=Sun Jul 14 10:07:00 2013, serviceref=1:0:16:5280:C96:3:EB0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sun Jul 14 11:36:40 2013
[Timer] Record RecordTimerEntry(name=Nip/Tuck, begin=Sun Jul 14 11:37:00 2013, serviceref=1:0:1:178E:C82:3:EB0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sun Jul 14 13:06:40 2013
[Timer] Record RecordTimerEntry(name=Nip/Tuck, begin=Sun Jul 14 13:07:00 2013, serviceref=1:0:1:178E:C82:3:EB0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sun Jul 14 12:21:40 2013
[Timer] Record RecordTimerEntry(name=Nip/Tuck, begin=Sun Jul 14 12:22:00 2013, serviceref=1:0:1:178E:C82:3:EB0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sun Jul 14 15:01:40 2013
[Timer] Record RecordTimerEntry(name=Grey's Anatomy, begin=Sun Jul 14 15:02:00 2013, serviceref=1:0:1:3214:45F:35:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sun Jul 14 16:59:40 2013
[Timer] Record RecordTimerEntry(name=True Blood, begin=Sun Jul 14 17:00:00 2013, serviceref=1:0:16:5282:C96:3:EB0000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Sun Jul 14 19:29:40 2013
[Timer] Record RecordTimerEntry(name=Grimm, begin=Sun Jul 14 19:30:00 2013, serviceref=1:0:1:320C:45F:35:C00000:0:0:0:, justplay=0)
[TIMER] record time changed, start prepare is now: Tue Jul 16 18:26:40 2013
[Timer] Record RecordTimerEntry(name=Vinger aan de poot, begin=Tue Jul 16 18:27:00 2013, serviceref=1:0:19:1B76:C88:3:EB0000:0:0:0:, justplay=0)
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
[SKIN] Parsing embedded skin <embedded-in-'Screensaver'>
[SKIN] No skin to read...
RemovePopup, id = ZapError
setValue 75
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
Setvolume: 75 75 (raw)
Setvolume: 16 16 (-1db)
playing 1:0:1:1B7B:C88:3:EB0000:0:0:0:
not pauseable.
not pauseable.
RemovePopup, id = ZapError
allocate channel.. 0c88:0003
opening frontend 0
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 11856000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 235 system 1 modulation 2 pilot 2, rolloff 1
tuning to 1256 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:1B7B:C88:3:EB0000:0:0:0:
allocate demux
child has terminated
pipes closed
child has terminated
pipes closed
[ePopen] command: route -n | grep  eth0
child has terminated
pipes closed
poll: unhandled POLLERR/HUP/NVAL for fd 33(16)
poll: unhandled POLLERR/HUP/NVAL for fd 35(16)
poll: unhandled POLLERR/HUP/NVAL for fd 39(16)
[SEC] set static current limiting
set sequence pos 3
set sequence pos 4
[SEC] setVoltage 1
[SEC] sleep 200ms
child has terminated
pipes closed
0.0.0.0
192.168
nameservers: [[195, 130, 130, 2], [195, 130, 131, 2]]
read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1], 'address': [192, 168, 0, 105]}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 0, 105], 'up': True, 'mac': '00:1d:ec:01:5b:8a', 'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 0, 1]}}
[OpenWebif] loading external plugins...
[OpenWebif] no plugins to load
[OpenWebif] started on 80
[OpenWebif] started on 443
poll: unhandled POLLERR/HUP/NVAL for fd 37(16)
[SEC] invalidate current switch params
[SEC] sendDiseqc: e00000(DiSEqC reset)
[SEC] sleep 50ms
[SEC] sendDiseqc: e00003(DiSEqC peripherial power on)
[SEC] sleep 150ms
[SEC] sendDiseqc: e01038f9(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
[SEC] set dynamic current limiting
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x7560f458 running
[eEPGCache] channel 0x7560f458 running
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0205), and 1 audio stream(s) (005c), and the pcr pid is 0205, and the text pid is 0024
allocate demux
decoder state: play, vpid=517, apid=92
DMX_SET_PES_FILTER(0x205) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x5c) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(0) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x205) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x24) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
AUDIO_CHANNEL_SELECT(0) - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:1B7B:C88:3:EB0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:1B7B:C88:3:EB0000:0:0:0:
RemovePopup, id = ZapError
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
PATready
use pmtpid 09e7 for service_id 1b7b
eventNewProgramInfo 0 0
have 1 video stream(s) (0205), and 1 audio stream(s) (005c), and the pcr pid is 0205, and the text pid is 0024
decoder state: play, vpid=517, apid=92
[eDVBCIInterfaces] gotPMT
AITready
sdt update done!
warning, skin is missing element servicename in <class 'Screens.InfoBarGenerics.NumberZap'>
[eDVBLocalTimerHandler] dont have correction.. set Transponder Diff
[eDVBLocalTimerHandler] update RTC
[eDVBLocalTimerHandler] time update to 21:41:32
[eDVBLocalTimerHandler] m_time_difference is 1374088849
[eDVBLocalTimerHandler] set Linux Time
[EPGC] time updated.. start EPG Mainloop
action ->  InfobarChannelSelection switchChannelUp
[EPGC] 70301 events read from /hdd/epg.dat
[EPGC] next update in 2 sec
ERROR reading PES (fd=51) - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 51(8)
[EPGC] start caching events(1374090098)
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
action ->  OkCancelActions ok
playing 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:1B7B:C88:3:EB0000:0:0:0:
[eDVBCAService] free service 1:0:1:1B7B:C88:3:EB0000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x7560f458
[eEPGCache] remove channel 0x7560f458
[EPGC] abort caching events !!
allocate channel.. 0451:0035
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 0 Freq 12515000 Pol 0 SR 22000000 INV 2 FEC 4 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0
tuning to 1915 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:FB0:451:35:C00000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
[SEC] setVoltage 2
[SEC] sleep 20ms
set sequence pos 3
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038f7(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion on, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion off, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x1a15d70 running
[eEPGCache] channel 0x1a15d70 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
allocate demux
decoder state: play, vpid=525, apid=122
DMX_SET_PES_FILTER(0x1ffe) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x7a) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 0 - ok
DMX_SET_PES_FILTER(0x20d) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x28) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:FB0:451:35:C00000:0:0:0:
RemovePopup, id = ZapError
PATready
use pmtpid 0844 for service_id 0fb0
[SEC] set dynamic current limiting
eventNewProgramInfo 0 0
have 1 video stream(s) (020d), and 1 audio stream(s) (007a), and the pcr pid is 1ffe, and the text pid is 0028
decoder state: play, vpid=525, apid=122
[eDVBCIInterfaces] gotPMT
VIDEO_GET_EVENT - ok
VIDEO_GET_EVENT - ok
sdt update done!
[EPGC] start caching events(1374090108)
action ->  InfobarChannelSelection zapDown
playing 1:0:1:5221:C99:3:EB0000:0:0:0:
[eDVBCAService] free slot 0 demux 0 for service 1:0:1:FB0:451:35:C00000:0:0:0:
[eDVBCAService] free service 1:0:1:FB0:451:35:C00000:0:0:0:
decoder state: play, vpid=-1, apid=-1
DEMUX_STOP - pcr - ok
DEMUX_STOP - video - ok
VIDEO_STOP - ok
AUDIO_STOP - ok
DEMUX_STOP - audio - ok
AUDIO_CONTINUE - ok
DEMUX_STOP - ttx - ok
start release channel timer
not pauseable.
not pauseable.
RemovePopup, id = ZapError
[eDVBLocalTimerHandler] remove channel 0x1a15d70
[eEPGCache] remove channel 0x1a15d70
[EPGC] abort caching events !!
allocate channel.. 0c99:0003
(0)tune
RotorCmd ffffffff, lastRotorCmd ffffffff
prepare_sat System 1 Freq 12187000 Pol 0 SR 27500000 INV 2 FEC 2 orbpos 235 system 1 modulation 2 pilot 2, rolloff 0
tuning to 1587 mhz
OURSTATE: tuning
allocate Channel: res 0
[eDVBCIInterfaces] addPMTHandler 1:0:1:5221:C99:3:EB0000:0:0:0:
allocate demux
[SEC] set static current limiting
[SEC] setTone 0
[SEC] sleep 25ms
set sequence pos 7
[SEC] invalidate current switch params
[SEC] sendDiseqc: e01038fb(?)
[SEC] sleep 50ms
set sequence pos 3
[SEC] setTone 1
[SEC] sleep 10ms
[SEC] update current switch params
[SEC] startTuneTimeout 5000
[SEC] setFrontend 1
setting frontend 0
(0)fe event: status 0, inversion off, m_tuning 1
[SEC] sleep 500ms
(0)fe event: status 1f, inversion on, m_tuning 2
OURSTATE: ok
[eDVBLocalTimerHandler] channel 0x756103f0 running
[eEPGCache] channel 0x756103f0 running
[EPGC] next update in 2 sec
stop release channel timer
ok ... now we start!!
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 1 audio stream(s) (0067), and the pcr pid is 0203, and the text pid is 0023
allocate demux
decoder state: play, vpid=515, apid=103
DMX_SET_PES_FILTER(0x203) - pcr - ok
DEMUX_START - pcr - ok
DMX_SET_PES_FILTER(0x67) - audio - ok
DEMUX_START - audio - ok
AUDIO_SET_BYPASS(1) - ok
AUDIO_PAUSE - ok
AUDIO_PLAY - ok
Video Device: /dev/dvb/adapter0/video0
demux device: /dev/dvb/adapter0/demux0
VIDEO_SET_STREAMTYPE 1 - ok
DMX_SET_PES_FILTER(0x203) - video - ok
DEMUX_START - video - ok
VIDEO_FREEZE - ok
VIDEO_PLAY - ok
DMX_SET_PES_FILTER(0x23) - ttx - ok
DEMUX_START - ttx - ok
VIDEO_SLOWMOTION(0) - ok
VIDEO_FAST_FORWARD(0) - ok
VIDEO_CONTINUE - ok
AUDIO_CONTINUE - ok
disable teletext subtitles
not pauseable.
not pauseable.
[eDVBCAService] new service 1:0:1:5221:C99:3:EB0000:0:0:0:
[eDVBCAService] add demux 0 to slot 0 service 1:0:1:5221:C99:3:EB0000:0:0:0:
RemovePopup, id = ZapError
[SEC] set dynamic current limiting
PATready
use pmtpid 0aa5 for service_id 5221
eventNewProgramInfo 0 0
have 1 video stream(s) (0203), and 2 audio stream(s) (0067, 0071), and the pcr pid is 0203, and the text pid is 0023
decoder state: play, vpid=515, apid=103
[eDVBCIInterfaces] gotPMT
[eDVBLocalTimerHandler] diff is 0
[eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
[eDVBLocalTimerHandler] not changed
sdt update done!
[EPGC] start caching events(1374090113)
action ->  InfobarMenuActions mainMenu
loading mainmenu XML...
TimerEdit TimerEditList
PluginBrowser PluginBrowser
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
[EPGC] abort non avail mhw reading
action ->  OkCancelActions cancel
action ->  InfobarActions showMovies
[ePNG] couldn't open /usr/share/enigma2/skin_default/icons/rep.png
Traceback (most recent call last):
  File "/usr/lib/enigma2/python/Components/ActionMap.py", line 46, in action
  File "/usr/lib/enigma2/python/Screens/InfoBar.py", line 123, in showMovies
  File "/usr/lib/enigma2/python/mytest.py", line 294, in openWithCallback
    dlg = self.open(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 304, in open
    dlg = self.current_dialog = self.instantiateDialog(screen, *arguments, **kwargs)
  File "/usr/lib/enigma2/python/mytest.py", line 234, in instantiateDialog
    return self.doInstantiateDialog(screen, arguments, kwargs, self.desktop)
  File "/usr/lib/enigma2/python/mytest.py", line 270, in doInstantiateDialog
    dlg.applySkin()
  File "/usr/lib/enigma2/python/Components/GUISkin.py", line 112, in applySkin
  File "/usr/lib/enigma2/python/Components/GUISkin.py", line 30, in createGUIScreen
  File "/usr/lib/enigma2/python/Components/Pixmap.py", line 102, in applySkin
  File "/usr/lib/enigma2/python/skin.py", line 247, in loadPixmap
skin.SkinError: {./skin.xml}: pixmap file /usr/share/enigma2/skin_default/icons/rep.png not found!. Please contact the skin's author!
(PyObject_CallObject(<bound method HelpableActionMap.action of <Components.ActionMap.HelpableActionMap instance at 0x1772a30>>,('InfobarActions', 'showMovies')) failed)
getResolvedKey config.plugins.crashlogautosubmit.sendAnonCrashlog failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addNetwork failed !! (Typo??)
getResolvedKey config.plugins.crashlogautosubmit.addWlan failed !! (Typo??)
]]>
		</enigma2crashlog>
	</crashlogs>
</openpli>

[Dimitrij]

skin.SkinError: {./skin.xml}: pixmap file /usr/share/enigma2/skin_default/icons/rep.png not found!. Please contact the skin's author!

Strange.

Here she added.

http://sourceforge.n...7c157d10319383/

[jimmyhand]

Hi,

 

I've downloaded another skin and this gives me access to the HDD again. Apparently there's something wrong with the latest version of the default skin?

[TheRonnie]

Im having the same problem on my vu+solo2 when i try to go on to youtube or something it says your having a soft ware problem & the screen goen grren & then it just goes to a channel