OpenPLi 4
MiLo 18 Sep 2013
Now that's normal - the vsftpd recipe is in there.my local build stubbornly insisted on 3.0.0 version building as well, until I manually 'git pulled' the repo...
Probably something went wrong on the buildserver last night, because there were more things missing than just vsftpd (e.g. smbnetfs not in the feed).
Trial 18 Sep 2013
Hi,
But this time it is not DMM who is in error, since they provide a working tmpd for their images, using openssl 0.9.8.
It is the OpenPLI team, who decided to abandon the openssl 0.9.8, in favor of the newer openssl 1.0 version, without providing any backwards compatibility.
bad idea bad comparison. Because your old Modell-T only has 105er tires an Bugatti should also use105er tires?
Pli 4 ist brand new and they should stick to old libraries because of that???? This time I agree fully with the team.
ciao
MiLo 18 Sep 2013
Yeah, something in the repository was blocking it. Fixed it (permanently by forcing a 'git reset --hard' before updating), and new builds are running now.Probably something went wrong on the buildserver last night, because there were more things missing than just vsftpd (e.g. smbnetfs not in the feed).
Dimmie 18 Sep 2013
Latest OpenPLi 4.0 gives problems with both satellite and cable tuners on a DM8000 first build.
Most channels work fine, but some channels simply give signal strength zero. Same channel listing in OpenPLI 3.0 on same box works fine.
I will also test on a later build DM8000 later this week.
jakey 19 Sep 2013
So mgcamd now works with simple addition of libcrypto.so.0.9.8
Did something change ?
athoik 19 Sep 2013
Hello,
If someone is trying to use DCC with empty password on OpenPLi 4 you will find out that you can't.
This is not vsFTPd fault, but problem with DCC.
>>220 (vsFTPd 3.0.2)\r\n Response code: Service ready for new user (220) Response arg: (vsFTPd 3.0.2) <<USER root\r\n Request command: USER Request arg: root >>331 Please specify the password.\r\n Response code: User name okay, need password (331) Response arg: Please specify the password. <<CWD /\r\n Request command: CWD Request arg: /
When using no password, DCC is never responding on 331 command.
http://en.wikipedia.org/wiki/List_of_FTP_server_return_codes 3xx Positive Intermediate reply The command has been accepted, but the requested action is being held in abeyance, pending receipt of further information. The user should send another command specifying this information. This reply is used in command sequence groups.
So the solution is either to use password either to contact DCC author and ask for a newer version of DCC that will handle correctly the FTP protocoll.
Hope it helps.
aki 22 Sep 2013
How about the Suntek plugin. Any progress on that?
Hello, the sundtek plugin works fine.
For Windows, download “Sundtek Settopbox Installer” on: http://sundtek.de/media/ssi.rar (v.1.3.9-2013.04.20-r1)
Pike_Bishop 22 Sep 2013
Hi PLI Team members,
i have maked today a online update with my pli-4.0 - all is good only the vsftpd problem i had
but this is solved by rename the vsftpd.conf.opkg to vsftp.conf.
but another thing as following;
i use the ppanel plugin to execute my own scripts but the font is very small with fixed 16 it's hardly readable (seeable)
so please change the line 1487 in the skin.xml from this;
<widget name="linelist" font="Fixed;16" position="50,110" size="1180,500" transparent="1" scrollbarMode="showOnDemand" selectionPixmap="PLi-HD/buttons/sel.png" />
to this;
<widget name="linelist" font="Regular;18" position="50,110" size="1180,500" transparent="1" scrollbarMode="showOnDemand" selectionPixmap="PLi-HD/buttons/sel.png" />
then it's ok
regards
Biki3
Pr2 23 Sep 2013
How about the Suntek plugin. Any progress on that?
Hello, the sundtek plugin works fine.
For Windows, download “Sundtek Settopbox Installer” on: http://sundtek.de/media/ssi.rar (v.1.3.9-2013.04.20-r1)
The sundtek plugin in the repository is the right one, you need to install it, then go into the plugin and launch the driver install.
Then it will find the Sundtek DVB-x stick.
Pr2
MrTwang 24 Sep 2013
I have OpenPLi on my DM800se as it was pre installed.. Yesterday I got a Duo2 and I'm trying to install it all myself!
I flashed BH onto it as I didn't realise that this was available!
Tonight I'll remove BH (glitchy and the interface isn't suited to me..) and flash PLi4!
Long live PLi
dirocca 24 Sep 2013
I have OpenPLi on my DM800se as it was pre installed.. Yesterday I got a Duo2 and I'm trying to install it all myself!
I flashed BH onto it as I didn't realise that this was available!
Tonight I'll remove BH (glitchy and the interface isn't suited to me..) and flash PLi4!
Long live PLi
welcome on the forum
pli4 works perfectly on the duo2
grtz Philip
redribo 28 Sep 2013
this image is like ferrari...........
i have solo2 and is the fastest image that i had ever tried.
boot about 20-25 sec
restart enigma about 5 sec
bravo pli team
Edited by redribo, 28 September 2013 - 16:07.
ims 5 Oct 2013
Q about building OpenPli4:
how more effective build image for 3 boxes ?
I am using similar build as on OE3 with script: update - build image - build feeds in loop for my boxes.
But under OE4 ( may be, due common some parts for all boxes), building image and feeds spend over 70 minuts for little change in enigma2's pythons code?!. It seems, feeds are compiled whole again and for each box (why then are they common ?) and it seems, are compiled some next parts.
jmgs@atlas-comms.com 23 Mar 2014
Can anyone help, I have oscam running with a legal card on pli 4 but cannot get oscam status to work all it brings up is a flash of info and then erron [ernno 146] connection refused. Help please, any answers never give an idiots guide for old techies to understand
Zoorg 17 Nov 2014
If this is the same what some other people are getting, the old configuration file of a preious version of vsftpd is still there. This file contains settings that aren't correct for the new version.Was done and no success in FTP.
The solution was in the german part of the forum: create the directories vsftpd and chroot in /usr/sahre
The correct solution is to just re-flash the box, or run:
mv -f /etc/vsftpd.conf-opkg /etc/vsftpd.conf
(please please please send exact error messages, then I can help. Just saying "it doesn't work" leaves me no clue as to what the cause may be).
I have the same error, see screenshot
Running mv -f /etc/vsftpd.conf-opkg /etc/vsftpd.conf just gives me that mv is not found
Attached Files
buzzfuzz 18 Nov 2014
hallo a i have problem with frequency 10,823 H 30000 5/6 on 0,8w thor - digi TV hd. Signal si super but nothing, no station. i have openpli 4.0, vu uno double tuner.
Erik Slagter 18 Nov 2014
To know what kernel your receiver is supplied with, simply login and type uname -a